Search   
MSDS 
:
 1,4-Dioxaspiro[4.5]decan-8-ol, 98+%
CAS 
:
 22428-87-1
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 22428-87-1 |1,4-Dioxaspiro[4.5]decan-8-ol | 98+ | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 22428-87-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Viscous liquid
Color: clear colorless
Odor: alcohol-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H14O3
Molecular Weight: 158.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 22428-87-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,4-Dioxaspiro[4.5]decan-8-ol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 22428-87-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 22428-87-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22428-87-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 4/08/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-Ascorbic acid 50-81-7
L-Asparagine Monohydrate 5794-13-8
L-Tryptophan 73-22-3
L-Tyrosine 60-18-4
L-Methionine 63-68-3
Methyl 5-oxazolecarboxylate, 96% 121432-12-0
L-Histidine 71-00-1
L-Histidine Hydrochloride Monohydrate 5934-29-2
Cycloheptatriene, 90% 544-25-2
2-Iodobenzyl alcohol, 99% 5159-41-1
5-Chlorovaleryl Chloride, 96% 1575-61-7
2-Nitro-p-phenylenediamine, 95-99% 5307-14-2
1,4-Dioxaspiro[4.5]decan-8-ol, 98+% 22428-87-1
Pyrazino[2,3-f]Quinoxaline, 99+% 231-23-2
Lanthanum chloride heptahydrate 10025-84-0
Lanthanum Oxide 1312-81-8
Lanthanum Nitrate Hexahydrate 10099-59-9
2,3-Pentanedione, 97% 600-14-6
Lauric Acid 143-07-7
Alpha-NPO, Scintillation Grade 846-63-9
4-Benzylpiperidine, 98% 31252-42-3
2-(2-Quinoxalinyl)malondialdehyde 0-00-0
4-Nitro-Benzylthiocyanate, 99% 13287-49-5
Methyl vinyl ketone 78-94-4
Lead 7439-92-1
2-Methoxy-5-nitroaniline, 99% 99-59-2
Methyltriphenylphosphonium iodide, 97% 2065-66-9
Lead(II) acetate trihydrate 301-04-2
4-Ethylbiphenyl-4'-carboxylic acid, 98% 5731-13-5
Mono-(Trimethylsilyl)Phosphite 91076-68-5
N-Acetylanthranilic acid, 99% 89-52-1
1,2,2,6,6-Pentamethylpiperidine, 95% (GC) 79-55-0
Dihydrogentrifluoride Polymer-Supported, ca 7 mMol HF/g of Amberlyst 12260-12-7
Lead (II) Chloride 7758-95-4
Triisopropanolamine borate, 98+% 101-00-8
(S)-3-tert.-Butyl-2,5-piperazinedione 65016-62-8
2-Methoxynaphthalene, 98% 93-04-9
Lead chromate 7758-97-6
1-(2'-Thienyl)Ethylmercaptan, 98% 94089-02-8
4-Bromobenzotrifluoride, 99% 402-43-7
Lead Dioxide 1309-60-0
N-Hydroxymaleimide, 97% 4814-74-8
1-Dodecanethiol, 98.5+% (gc) 112-55-0
2,4,6-Trimethylaniline, 97% 88-05-1
Iodobenzene diacetate, 98% 3240-34-4
Trans 2, cis 6-nonadienol, 94% 28069-72-9
1,5-Dihydroxy-1,2,3,4-Tetrahydro-Naphthalene, Tech. 40771-26-4
Acrolein dimethyl acetal, 99% 6044-68-4
Lead(II) nitrate 10099-74-8
Lead Oxide Yellow 1317-36-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net