**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4814-74-8 |N-Hydroxymaleimide | 97% | 225-385-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Air sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere. Do not get
water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Handle under an inert atmosphere. Store protected
from air. Do not allow contact with water. Discard contaminated
shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Keep under a nitrogen
blanket. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Do not expose to air. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4814-74-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: yellow - brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 133 - 135 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C4H3NO3
Molecular Weight: 113.0259
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at normal temperatures in tightly closed containers under an
inert atmosphere.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, exposure to air,
excess heat.
Incompatibilities with Other Materials:
Moisture, air.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 4814-74-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Hydroxymaleimide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4814-74-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4814-74-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4814-74-8 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #7 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
L-Ascorbic acid
| 50-81-7 |
|
L-Asparagine Monohydrate
| 5794-13-8 |
|
L-Tryptophan
| 73-22-3 |
|
L-Tyrosine
| 60-18-4 |
|
L-Methionine
| 63-68-3 |
|
Methyl 5-oxazolecarboxylate, 96%
| 121432-12-0 |
|
L-Histidine
| 71-00-1 |
|
L-Histidine Hydrochloride Monohydrate
| 5934-29-2 |
|
Cycloheptatriene, 90%
| 544-25-2 |
|
2-Iodobenzyl alcohol, 99%
| 5159-41-1 |
|
5-Chlorovaleryl Chloride, 96%
| 1575-61-7 |
|
2-Nitro-p-phenylenediamine, 95-99%
| 5307-14-2 |
|
1,4-Dioxaspiro[4.5]decan-8-ol, 98+%
| 22428-87-1 |
|
Pyrazino[2,3-f]Quinoxaline, 99+%
| 231-23-2 |
|
Lanthanum chloride heptahydrate
| 10025-84-0 |
|
Lanthanum Oxide
| 1312-81-8 |
|
Lanthanum Nitrate Hexahydrate
| 10099-59-9 |
|
2,3-Pentanedione, 97%
| 600-14-6 |
|
Lauric Acid
| 143-07-7 |
|
Alpha-NPO, Scintillation Grade
| 846-63-9 |
|
4-Benzylpiperidine, 98%
| 31252-42-3 |
|
2-(2-Quinoxalinyl)malondialdehyde
| 0-00-0 |
|
4-Nitro-Benzylthiocyanate, 99%
| 13287-49-5 |
|
Methyl vinyl ketone
| 78-94-4 |
|
Lead
| 7439-92-1 |
|
2-Methoxy-5-nitroaniline, 99%
| 99-59-2 |
|
Methyltriphenylphosphonium iodide, 97%
| 2065-66-9 |
|
Lead(II) acetate trihydrate
| 301-04-2 |
|
4-Ethylbiphenyl-4'-carboxylic acid, 98%
| 5731-13-5 |
|
Mono-(Trimethylsilyl)Phosphite
| 91076-68-5 |
|
N-Acetylanthranilic acid, 99%
| 89-52-1 |
|
1,2,2,6,6-Pentamethylpiperidine, 95% (GC)
| 79-55-0 |
|
Dihydrogentrifluoride Polymer-Supported, ca 7 mMol HF/g of Amberlyst
| 12260-12-7 |
|
Lead (II) Chloride
| 7758-95-4 |
|
Triisopropanolamine borate, 98+%
| 101-00-8 |
|
(S)-3-tert.-Butyl-2,5-piperazinedione
| 65016-62-8 |
|
2-Methoxynaphthalene, 98%
| 93-04-9 |
|
Lead chromate
| 7758-97-6 |
|
1-(2'-Thienyl)Ethylmercaptan, 98%
| 94089-02-8 |
|
4-Bromobenzotrifluoride, 99%
| 402-43-7 |
|
Lead Dioxide
| 1309-60-0 |
|
N-Hydroxymaleimide, 97%
| 4814-74-8 |
|
1-Dodecanethiol, 98.5+% (gc)
| 112-55-0 |
|
2,4,6-Trimethylaniline, 97%
| 88-05-1 |
|
Iodobenzene diacetate, 98%
| 3240-34-4 |
|
Trans 2, cis 6-nonadienol, 94%
| 28069-72-9 |
|
1,5-Dihydroxy-1,2,3,4-Tetrahydro-Naphthalene, Tech.
| 40771-26-4 |
|
Acrolein dimethyl acetal, 99%
| 6044-68-4 |
|
Lead(II) nitrate
| 10099-74-8 |
|
Lead Oxide Yellow
| 1317-36-8 |
|
|