Search   
MSDS 
:
 1,2-Epoxy-2-methylbutane
CAS 
:
 30095-63-7
SYNONYMS 
:
 2-Ethyl-2-methyloxirane-alpha-Methyl-alpha-ethylethylene oxide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 30095-63-7 |1,2-Epoxy-2-methylbutane | 98 | 250-046-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Moisture sensitive.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. May be harmful if inhaled. Vapors may cause
dizziness or suffocation. May cause burning sensation in the chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Flammable liquid
and vapor. Will be easily ignited by heat, sparks or flame.
Containers may explode if exposed to fire. Runoff from fire control
or dilution water may cause pollution.
Extinguishing Media:
Water may spread fire. Use carbon dioxide or dry chemical. DO NOT
USE WATER! Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use with adequate ventilation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Keep from contact with
moist air and steam.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 30095-63-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 79.5 deg C @ 740mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -12 deg C ( 10.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H10O
Molecular Weight: 86.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive.
Conditions to Avoid:
Ignition sources, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 30095-63-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Epoxy-2-methylbutane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 30095-63-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 30095-63-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 30095-63-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/14/2000 Revision #4 Date: 4/06/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl 4-amino-3-bromobenzoate 106896-49-5
2,4-Dichloro-5-hydroxyaniline 39489-79-7
6-Chloro-4-trifluoromethoxyaniline 0-01-1
2,4-Dibromo-6-methylaniline 30273-41-7
1,4-Bis(trichloromethyl)benzene, 99% 68-36-0
Nicotinamide, p.a. 98-92-0
6-Chloro-9-(3-N-(2-chloroethyl-amino)-propylamino-2-methoxyacridine 17064-47-0
2-Amino-5-bromobenzotrifluoride 445-02-3
N,N'-p-Phenylenedimaleimide 3278-31-7
N,N'-m-Phenylenedimaleimide 3006-93-7
Allyltrimethylsilane, 97% 762-72-1
Celite 545 68855-54-9
3-Bromo-1-propanol, 97% 627-18-9
1,2-Epoxy-2-methylbutane 30095-63-7
2,3-Epoxy-2-methylbutane 5076-19-7
Dicyclopentadiene diepoxide 81-21-0
1-(3-Methylphenyl)-piperazine, 99% 41186-03-2
Lithium bis(trimethylsilyl)amide, 23% in methyl tert-butyl ether 100-41-4
Lithium bis(trimethylsilyl)amide, 20% in THF 100-41-4
2(2-Bromoethyl)-1,3-dioxolane, 96% 18742-02-4
N-(Phenylseleno)phthalimide, tech. 71098-88-9
Brij?? 98 9004-98-2
4-Fluoro-N-methylaniline 459-59-6
3,4,5-Trimethoxyacetophenone, 99+% 1136-86-3
Potassium tetracyanonickelate(II) hydrate 14220-17-8
Zinc peroxide, 55% 1314-22-3
3,4-Dimethyl-3,4-diphenylhexane 10192-93-5
1,4-Naphthalenediol (pract), 95% (uv-vis) 571-60-8
2,3-Dimethyl-2,3-diphenylbutane 1889-67-4
Dicumyl peroxide 80-43-3
Cumyl hydroperoxide 80-15-9
tert-Butyl cumyl peroxide 98-82-8
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxynonane, 41% solution in 24748-23-0
Di(tert-butylperoxyisopropyl)benzene 2212-81-9
tert-Butyl peroxy-3,5,5-trimethylhexanoate 13122-18-4
tert-Butylperoxy 2-ethylhexyl carbonate 34443-12-4
Di-tert-butyl peroxide 110-05-4
1,1-Di(tert-butylperoxy)cyclohexane, 50% solution in aromatic free 3006-86-8
Lauroyl peroxide 105-74-8
tert-Butyl peroxyacetate, 50% solution in aromatic free mineral 107-71-1
2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane 78-63-7
2,2-Di(tert-butylperoxy)butane, 50% solution in aromatic free mineral 78-93-3
Benzoylformic acid, 97% 611-73-4
Ethyl 7-bromoheptanoate 29823-18-5
16-Hydroxyhexadecanoic Acid, 98% 506-13-8
4-(4,6-Dimethoxy[1.3.5]triazin-2-yl)-4-methylmorpholinium chloride 0-00-0
3-Methoxysalicylic acid, 97% 877-22-5
d-alpha-Tocopherylquinone, 90-95% 7559-04-8
Dibutyl Maleate 105-76-0
Glutathione-Agarose, 4% cross-linked 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net