Search   
MSDS 
:
 Meta-fluorotoluene, 99%
CAS 
:
 352-70-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 352-70-5 |m-Fluorotoluene | 99.0 | 206-524-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Use water
spray to keep fire-exposed containers cool. Containers may explode
in the heat of a fire. Flammable liquid and vapor. Vapors may be
heavier than air. They can spread along the ground and collect in
low or confined areas. Will be easily ignited by heat, sparks or
flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT use straight
streams of water. For small fires, use dry chemical, carbon dioxide,
water spray or regular foam. Cool containers with flooding
quantities of water until well after fire is out. For large fires,
use water spray, fog or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 352-70-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 21.5 mbar @ 20 deg
Viscosity: Not available.
Boiling Point: 115 deg C @ 760.00mm Hg
Freezing/Melting Point: -87 deg C
Autoignition Temperature: Not available.
Flash Point: 12 deg C ( 53.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: immiscible
Specific Gravity/Density: .9910g/cm3
Molecular Formula: C7H7F
Molecular Weight: 110.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 352-70-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
m-Fluorotoluene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLUOROTOLUENES
Hazard Class: 3
UN Number: 2388
Packing Group: II
IMO
Shipping Name: FLUOROTOLUENES
Hazard Class: 3.2
UN Number: 2388
Packing Group: II
RID/ADR
Shipping Name: FLUOROTOLUENES
Hazard Class: 3
UN Number: 2388
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 352-70-5: No information available.
Canada
CAS# 352-70-5 is listed on Canada's NDSL List.
CAS# 352-70-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 352-70-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/26/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Adamantanamine hydrochloride, 99+% 665-66-7
3-Hexanol, 97% 623-37-0
1-Heptadecanol, 98% 1454-85-9
Oxazine 170 Perchlorate, Laser Grade 62669-60-7
Phytol, Tech. 80% 150-86-7
2-(2,4-Dinitrobenzyl)pyridine 1151-97-9
N-Benzylmethylamine, 99% (GC) 103-67-3
2-Ethyl-2-oxazoline, 99+% 10431-98-8
N-(9h-fluoren-2-ylmethoxycarbonyloxy)suc- cinimide, 98% 82911-69-1
(S)-(-)-2-Amino-2-Methyl-4-Pentenoic Acid, Monohydrate, 99+% e.e. 96886-55-4
Precocene II, 99% 644-06-4
1-(2-Mesitylsulfonyl)-1H-1,2,4-triazole, 99% 54230-59-0
Ethyl 2-(methyldithio)propionate, 98+% 23747-43-5
Adipic Dihydrazide, 98% 1071-93-8
3-Nitrobenzyl alcohol, 98% 619-25-0
5,5' -Dithiobis-(2-Nitrobenzoic Acid), 99% 69-78-3
2-Methylnaphth[2,1-d]oxazole 20686-65-1
1-(2,5-Dimethylphenyl)piperazine, 99% 1013-25-8
4-Chloro-7-(trifluoromethyl)quinoline, 98% 346-55-4
Pyridine 1, 99% (UV-Vis) 87004-02-2
2-Ethyl-4-(2,2,3-trimethylcyclopent-3-en-yl)-but-2-en-1-ol, mixture 28219-61-6
Tris(dioxa-3,6-heptyl)amine, 95-98% 70384-51-9
2-Amino-5-Ethylthio-1,3,4-Thiadiazole, 99% 25660-70-2
Triethyl phosphonoacetate ,97+% 867-13-0
N,N'-Dimethylthiourea, 99% 534-13-4
Carbonylbis-(triphenylphosphine)-iridium (I) chloride, 99.99% 14871-41-1
Poly(acrylamide), granular (non-ionic), average m.w. 5 t0 6,000,000 9003-05-8
Meta-fluorotoluene, 99% 352-70-5
1,2,3,4-Tetrahydro-2-naphthoic acid, 98% 53440-12-3
N,N-Dimethylaminobutane, 99+% 927-62-8
4-(4-Nitrophenylazo)-1-naphthol, 99% 5290-62-0
2,3-Dimethyl-2,3-Dinitrobutane, 98% 3964-18-9
n-Ethylacetamide 625-50-3
Carboxymethyl Cellulose Ether 9000-11-7
4'-Fluoroacetanilide, 99+% 351-83-7
Methyl cyclohexanecarboxylate, 98% 4630-82-4
1,8-Bis(methylamino)-3,6-dioxaoctane, 98%
4,6-bis(butylamino)-s-triazin-2-ol 65719-10-0
Coumarin 106, Laser Grade 41175-45-5
Tetramethylammonium fluoride, anhydrous 373-68-2
Disperse Orange 3, 95% (TLC) 730-40-5
Stearic Acid, Sodium Salt, 96%, Mixture of Stearic- and Palmitic 822-16-2
3-(Trifluoromethyl)benzyl alcohol, 98+% 349-75-7
Alpha-BOC-Epsilon-CBZ-L-Lysine DCHA, 99.5+% 0-00-1
N,N-Dipropylaniline, 95% (GC) 2217-07-4
4-Isopropylphenol, 98% 99-89-8
2-Fluorophenylacetic Acid, 98% 451-82-1
Triphenylmethyl Chloride, 99% 76-83-5
Cetylpyridinium chloride monohydrate 123-03-5
8-Hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt, laser grade 6358-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net