Search   
MSDS 
:
 Stearic Acid, Sodium Salt, 96%, Mixture of Stearic- and Palmitic
CAS 
:
 822-16-2
SYNONYMS 
:
 Sodium Stearate; Octadecanoic Acid, Sodium Salt
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 822-16-2 |Stearic Acid, Sodium Salt | 96% | 212-490-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling. The toxicological properties of this substance
have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Store protected from
light.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 822-16-2:

Belgium - TWA: (listed as stearates): 10 mg/m3 VLE
Malaysia: (listed as stearates): 10 mg/m3 TWA
Spain: (listed as stearates): 10 mg/m3 VLA-ED (not including
stearates of toxic metals)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: fatty-tallow odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in cold and hot water
Specific Gravity/Density:
Molecular Formula: C18H35NaO2
Molecular Weight: 304.45

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 822-16-2: WI4725000
LD50/LC50:
Not available.
Carcinogenicity:
Stearic Acid, Sodium Salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 822-16-2: 2
Canada
CAS# 822-16-2 is listed on Canada's DSL List.
CAS# 822-16-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 822-16-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/01/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Adamantanamine hydrochloride, 99+% 665-66-7
3-Hexanol, 97% 623-37-0
1-Heptadecanol, 98% 1454-85-9
Oxazine 170 Perchlorate, Laser Grade 62669-60-7
Phytol, Tech. 80% 150-86-7
2-(2,4-Dinitrobenzyl)pyridine 1151-97-9
N-Benzylmethylamine, 99% (GC) 103-67-3
2-Ethyl-2-oxazoline, 99+% 10431-98-8
N-(9h-fluoren-2-ylmethoxycarbonyloxy)suc- cinimide, 98% 82911-69-1
(S)-(-)-2-Amino-2-Methyl-4-Pentenoic Acid, Monohydrate, 99+% e.e. 96886-55-4
Precocene II, 99% 644-06-4
1-(2-Mesitylsulfonyl)-1H-1,2,4-triazole, 99% 54230-59-0
Ethyl 2-(methyldithio)propionate, 98+% 23747-43-5
Adipic Dihydrazide, 98% 1071-93-8
3-Nitrobenzyl alcohol, 98% 619-25-0
5,5' -Dithiobis-(2-Nitrobenzoic Acid), 99% 69-78-3
2-Methylnaphth[2,1-d]oxazole 20686-65-1
1-(2,5-Dimethylphenyl)piperazine, 99% 1013-25-8
4-Chloro-7-(trifluoromethyl)quinoline, 98% 346-55-4
Pyridine 1, 99% (UV-Vis) 87004-02-2
2-Ethyl-4-(2,2,3-trimethylcyclopent-3-en-yl)-but-2-en-1-ol, mixture 28219-61-6
Tris(dioxa-3,6-heptyl)amine, 95-98% 70384-51-9
2-Amino-5-Ethylthio-1,3,4-Thiadiazole, 99% 25660-70-2
Triethyl phosphonoacetate ,97+% 867-13-0
N,N'-Dimethylthiourea, 99% 534-13-4
Carbonylbis-(triphenylphosphine)-iridium (I) chloride, 99.99% 14871-41-1
Poly(acrylamide), granular (non-ionic), average m.w. 5 t0 6,000,000 9003-05-8
Meta-fluorotoluene, 99% 352-70-5
1,2,3,4-Tetrahydro-2-naphthoic acid, 98% 53440-12-3
N,N-Dimethylaminobutane, 99+% 927-62-8
4-(4-Nitrophenylazo)-1-naphthol, 99% 5290-62-0
2,3-Dimethyl-2,3-Dinitrobutane, 98% 3964-18-9
n-Ethylacetamide 625-50-3
Carboxymethyl Cellulose Ether 9000-11-7
4'-Fluoroacetanilide, 99+% 351-83-7
Methyl cyclohexanecarboxylate, 98% 4630-82-4
1,8-Bis(methylamino)-3,6-dioxaoctane, 98%
4,6-bis(butylamino)-s-triazin-2-ol 65719-10-0
Coumarin 106, Laser Grade 41175-45-5
Tetramethylammonium fluoride, anhydrous 373-68-2
Disperse Orange 3, 95% (TLC) 730-40-5
Stearic Acid, Sodium Salt, 96%, Mixture of Stearic- and Palmitic 822-16-2
3-(Trifluoromethyl)benzyl alcohol, 98+% 349-75-7
Alpha-BOC-Epsilon-CBZ-L-Lysine DCHA, 99.5+% 0-00-1
N,N-Dipropylaniline, 95% (GC) 2217-07-4
4-Isopropylphenol, 98% 99-89-8
2-Fluorophenylacetic Acid, 98% 451-82-1
Triphenylmethyl Chloride, 99% 76-83-5
Cetylpyridinium chloride monohydrate 123-03-5
8-Hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt, laser grade 6358-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net