Search   
MSDS 
:
 N,N'-Dimethylthiourea, 99%
CAS 
:
 534-13-4
SYNONYMS 
:
 Dimethylthiocarbamide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 534-13-4 |N,N'-Dimethylthiourea | 99 | 208-588-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Moisture sensitive.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Do NOT get water inside containers. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Do not allow contact with water. Keep
from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 534-13-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: off-white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 155 deg C @ 1.00mbar
Freezing/Melting Point: 58.00 - 63.00 deg C
Autoignition Temperature: Not available.
Flash Point: 200 deg C ( 392.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >65 deg C
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C3H8N2S
Molecular Weight: 104.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 534-13-4: YT1520000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
N,N'-Dimethylthiourea -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: I
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: I
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: I

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 46 If swallowed, seek medical advice immediately
and show this container or label.
WGK (Water Danger/Protection)
CAS# 534-13-4: No information available.
Canada
CAS# 534-13-4 is listed on Canada's NDSL List.
CAS# 534-13-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 534-13-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/05/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Adamantanamine hydrochloride, 99+% 665-66-7
3-Hexanol, 97% 623-37-0
1-Heptadecanol, 98% 1454-85-9
Oxazine 170 Perchlorate, Laser Grade 62669-60-7
Phytol, Tech. 80% 150-86-7
2-(2,4-Dinitrobenzyl)pyridine 1151-97-9
N-Benzylmethylamine, 99% (GC) 103-67-3
2-Ethyl-2-oxazoline, 99+% 10431-98-8
N-(9h-fluoren-2-ylmethoxycarbonyloxy)suc- cinimide, 98% 82911-69-1
(S)-(-)-2-Amino-2-Methyl-4-Pentenoic Acid, Monohydrate, 99+% e.e. 96886-55-4
Precocene II, 99% 644-06-4
1-(2-Mesitylsulfonyl)-1H-1,2,4-triazole, 99% 54230-59-0
Ethyl 2-(methyldithio)propionate, 98+% 23747-43-5
Adipic Dihydrazide, 98% 1071-93-8
3-Nitrobenzyl alcohol, 98% 619-25-0
5,5' -Dithiobis-(2-Nitrobenzoic Acid), 99% 69-78-3
2-Methylnaphth[2,1-d]oxazole 20686-65-1
1-(2,5-Dimethylphenyl)piperazine, 99% 1013-25-8
4-Chloro-7-(trifluoromethyl)quinoline, 98% 346-55-4
Pyridine 1, 99% (UV-Vis) 87004-02-2
2-Ethyl-4-(2,2,3-trimethylcyclopent-3-en-yl)-but-2-en-1-ol, mixture 28219-61-6
Tris(dioxa-3,6-heptyl)amine, 95-98% 70384-51-9
2-Amino-5-Ethylthio-1,3,4-Thiadiazole, 99% 25660-70-2
Triethyl phosphonoacetate ,97+% 867-13-0
N,N'-Dimethylthiourea, 99% 534-13-4
Carbonylbis-(triphenylphosphine)-iridium (I) chloride, 99.99% 14871-41-1
Poly(acrylamide), granular (non-ionic), average m.w. 5 t0 6,000,000 9003-05-8
Meta-fluorotoluene, 99% 352-70-5
1,2,3,4-Tetrahydro-2-naphthoic acid, 98% 53440-12-3
N,N-Dimethylaminobutane, 99+% 927-62-8
4-(4-Nitrophenylazo)-1-naphthol, 99% 5290-62-0
2,3-Dimethyl-2,3-Dinitrobutane, 98% 3964-18-9
n-Ethylacetamide 625-50-3
Carboxymethyl Cellulose Ether 9000-11-7
4'-Fluoroacetanilide, 99+% 351-83-7
Methyl cyclohexanecarboxylate, 98% 4630-82-4
1,8-Bis(methylamino)-3,6-dioxaoctane, 98%
4,6-bis(butylamino)-s-triazin-2-ol 65719-10-0
Coumarin 106, Laser Grade 41175-45-5
Tetramethylammonium fluoride, anhydrous 373-68-2
Disperse Orange 3, 95% (TLC) 730-40-5
Stearic Acid, Sodium Salt, 96%, Mixture of Stearic- and Palmitic 822-16-2
3-(Trifluoromethyl)benzyl alcohol, 98+% 349-75-7
Alpha-BOC-Epsilon-CBZ-L-Lysine DCHA, 99.5+% 0-00-1
N,N-Dipropylaniline, 95% (GC) 2217-07-4
4-Isopropylphenol, 98% 99-89-8
2-Fluorophenylacetic Acid, 98% 451-82-1
Triphenylmethyl Chloride, 99% 76-83-5
Cetylpyridinium chloride monohydrate 123-03-5
8-Hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt, laser grade 6358-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net