Search   
MSDS 
:
 Triethyl phosphonoacetate ,97+%
CAS 
:
 867-13-0
SYNONYMS 
:
 Diethyl ethoxycarbonylmethylphosphonate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 867-13-0 |Triethyl phosphonoacetate | 99+% | 212-757-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Avoid breathing dust, vapor, mist,
or gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation. Use with adequate
ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 867-13-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Clear - colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 260 - 262 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1300g/cm3
Molecular Formula: C8H17O5P
Molecular Weight: 224.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 867-13-0: AG9800000
LD50/LC50:
Not available.
Carcinogenicity:
Triethyl phosphonoacetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 867-13-0: 1
Canada
CAS# 867-13-0 is listed on Canada's DSL List.
CAS# 867-13-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 867-13-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/04/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Adamantanamine hydrochloride, 99+% 665-66-7
3-Hexanol, 97% 623-37-0
1-Heptadecanol, 98% 1454-85-9
Oxazine 170 Perchlorate, Laser Grade 62669-60-7
Phytol, Tech. 80% 150-86-7
2-(2,4-Dinitrobenzyl)pyridine 1151-97-9
N-Benzylmethylamine, 99% (GC) 103-67-3
2-Ethyl-2-oxazoline, 99+% 10431-98-8
N-(9h-fluoren-2-ylmethoxycarbonyloxy)suc- cinimide, 98% 82911-69-1
(S)-(-)-2-Amino-2-Methyl-4-Pentenoic Acid, Monohydrate, 99+% e.e. 96886-55-4
Precocene II, 99% 644-06-4
1-(2-Mesitylsulfonyl)-1H-1,2,4-triazole, 99% 54230-59-0
Ethyl 2-(methyldithio)propionate, 98+% 23747-43-5
Adipic Dihydrazide, 98% 1071-93-8
3-Nitrobenzyl alcohol, 98% 619-25-0
5,5' -Dithiobis-(2-Nitrobenzoic Acid), 99% 69-78-3
2-Methylnaphth[2,1-d]oxazole 20686-65-1
1-(2,5-Dimethylphenyl)piperazine, 99% 1013-25-8
4-Chloro-7-(trifluoromethyl)quinoline, 98% 346-55-4
Pyridine 1, 99% (UV-Vis) 87004-02-2
2-Ethyl-4-(2,2,3-trimethylcyclopent-3-en-yl)-but-2-en-1-ol, mixture 28219-61-6
Tris(dioxa-3,6-heptyl)amine, 95-98% 70384-51-9
2-Amino-5-Ethylthio-1,3,4-Thiadiazole, 99% 25660-70-2
Triethyl phosphonoacetate ,97+% 867-13-0
N,N'-Dimethylthiourea, 99% 534-13-4
Carbonylbis-(triphenylphosphine)-iridium (I) chloride, 99.99% 14871-41-1
Poly(acrylamide), granular (non-ionic), average m.w. 5 t0 6,000,000 9003-05-8
Meta-fluorotoluene, 99% 352-70-5
1,2,3,4-Tetrahydro-2-naphthoic acid, 98% 53440-12-3
N,N-Dimethylaminobutane, 99+% 927-62-8
4-(4-Nitrophenylazo)-1-naphthol, 99% 5290-62-0
2,3-Dimethyl-2,3-Dinitrobutane, 98% 3964-18-9
n-Ethylacetamide 625-50-3
Carboxymethyl Cellulose Ether 9000-11-7
4'-Fluoroacetanilide, 99+% 351-83-7
Methyl cyclohexanecarboxylate, 98% 4630-82-4
1,8-Bis(methylamino)-3,6-dioxaoctane, 98%
4,6-bis(butylamino)-s-triazin-2-ol 65719-10-0
Coumarin 106, Laser Grade 41175-45-5
Tetramethylammonium fluoride, anhydrous 373-68-2
Disperse Orange 3, 95% (TLC) 730-40-5
Stearic Acid, Sodium Salt, 96%, Mixture of Stearic- and Palmitic 822-16-2
3-(Trifluoromethyl)benzyl alcohol, 98+% 349-75-7
Alpha-BOC-Epsilon-CBZ-L-Lysine DCHA, 99.5+% 0-00-1
N,N-Dipropylaniline, 95% (GC) 2217-07-4
4-Isopropylphenol, 98% 99-89-8
2-Fluorophenylacetic Acid, 98% 451-82-1
Triphenylmethyl Chloride, 99% 76-83-5
Cetylpyridinium chloride monohydrate 123-03-5
8-Hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt, laser grade 6358-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net