Search   
MSDS 
:
 4'-Fluoropropiophenone, 97%
CAS 
:
 456-03-1
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 456-03-1 |4'-Fluoropropiophenone | 97 | 207-255-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated. Combustible
liquid and vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Keep away from heat and flame.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 456-03-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear light yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 180 deg C @ 18 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 76 deg C ( 168.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.0960 g/ml
Molecular Formula: C9H9FO
Molecular Weight: 152.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 456-03-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4'-Fluoropropiophenone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 456-03-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 456-03-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 456-03-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 1/07/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2'-Thiodiethanol 111-48-8
Methyl Blue 28983-56-4
3,3-Diphenylpropionic Acid, 97% (GC) 606-83-7
Potassium Dichromate 0.021 M to 0.0417M 7732-18-5
Potassium Hydroxide 0.05N - 0.1N (in Methanol) 67-56-1
Benzenesulfonyl hydrazide, 98% 80-17-1
2,3-Dimethoxybenzaldehyde, 97% 86-51-1
Disodium hydrogen orthophosphosphate dodecahydrate 7558-79-4
Sulfobromophthalein Sodium Tetrahydrate 71-63-6
Disodium hydrogen orthophosphate anhydrous 7558-79-4
Lotoxane
(3,4-Dimethoxyphenyl)acetonitrile, 99+% 93-17-4
3-Acetylcoumarin, 96% 3949-36-8
Tetracycline Hydrochloride 64-75-5
Prim. active amyl alcohol,99% 1565-80-6
P-Chlorovalerophenone, 98% 25017-08-7
Buffer Solution pH 6.0 1310-73-2
Buffer Solution pH 6.87 877-24-7
Buffer Solution pH 7.0 7487-94-7
Buffer Solution pH 8.0 1310-73-2
Buffer Solution pH 9.0, 9.2 7647-14-5
Buffer Solution pH 9.23 7732-18-5
Buffer Solution pH 10.0 1310-73-2
Buffer Solution pH 10.0 Color Coded Blue 76-61-9
Hydrogen Peroxide 20-40 Volumes 7722-84-1
Buffer Tablets pH 9.2 1330-43-4
Calcium nitrate anhydrous 10124-37-5
Calcium Bromide Hydrated 7789-41-5
Cadmium Chloride Hydrated 10108-64-2
Collodion Flexible Methylated 60-29-7
Phosphonitrilic chloride, trimer, 98% 940-71-6
N,N-dimethylformamide dipropyl acetal 98% 6006-65-1
Coniferyl Alcohol, 99% 458-35-5
3,3'-Dimethyl-1,1'-Diphenyl??4,4'-Bi-2- Pyrazoline??-5,5'-Dione 7477-67-0
3,4-Dihydroxybenzaldehyde, 97% 139-85-5
1-Benzyl-3-piperidone hydrochloride, 95+% (tlc) 50606-58-1
1-Aza-3,5-Dimethyl-4,6-Dioxabicyclo-(3.3.0)Octane, 98% 26562-68-5
n-(3-Aminopropyl)-morpholine, 98% 123-00-2
3,4,5-Trimethoxyphenol, 98.5+% 642-71-7
Aluminium foil, metal sheet 7429-90-5
Copper Metal Turnings and Granules 7440-50-8
Copper metal wire, sheet, and foil 7440-50-8
4'-Fluoropropiophenone, 97% 456-03-1
Dimidium Bromide Monohydrate, 98% 518-67-2
Praseodymium(iii) chloride hexahydrate 99.9% 17272-46-7
Cellulose Acetate Hydrogen Phthalate 9004-38-0
Sodium Persulfate, 98+% 7775-27-1
2,3-Dihydro-6-(2-hydroxyethyl)-5-methyl-
BSI Papanicolaou Stain OG-6 64-17-5
Arsenazo III (disodium salt) 62337-00-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net