Search   
MSDS 
:
 1-Benzyl-3-piperidone hydrochloride, 95+% (tlc)
CAS 
:
 50606-58-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 50606-58-1 |1-Benzyl-3-piperidone hydrochloride | 95% | 256-646-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 50606-58-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: cream to light brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 170 - 174 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H15NO.HCl.xH2O
Molecular Weight: 225.72

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Has not been fully evaluated.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 50606-58-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Benzyl-3-piperidone hydrochloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 50606-58-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 50606-58-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 50606-58-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 5/28/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2'-Thiodiethanol 111-48-8
Methyl Blue 28983-56-4
3,3-Diphenylpropionic Acid, 97% (GC) 606-83-7
Potassium Dichromate 0.021 M to 0.0417M 7732-18-5
Potassium Hydroxide 0.05N - 0.1N (in Methanol) 67-56-1
Benzenesulfonyl hydrazide, 98% 80-17-1
2,3-Dimethoxybenzaldehyde, 97% 86-51-1
Disodium hydrogen orthophosphosphate dodecahydrate 7558-79-4
Sulfobromophthalein Sodium Tetrahydrate 71-63-6
Disodium hydrogen orthophosphate anhydrous 7558-79-4
Lotoxane
(3,4-Dimethoxyphenyl)acetonitrile, 99+% 93-17-4
3-Acetylcoumarin, 96% 3949-36-8
Tetracycline Hydrochloride 64-75-5
Prim. active amyl alcohol,99% 1565-80-6
P-Chlorovalerophenone, 98% 25017-08-7
Buffer Solution pH 6.0 1310-73-2
Buffer Solution pH 6.87 877-24-7
Buffer Solution pH 7.0 7487-94-7
Buffer Solution pH 8.0 1310-73-2
Buffer Solution pH 9.0, 9.2 7647-14-5
Buffer Solution pH 9.23 7732-18-5
Buffer Solution pH 10.0 1310-73-2
Buffer Solution pH 10.0 Color Coded Blue 76-61-9
Hydrogen Peroxide 20-40 Volumes 7722-84-1
Buffer Tablets pH 9.2 1330-43-4
Calcium nitrate anhydrous 10124-37-5
Calcium Bromide Hydrated 7789-41-5
Cadmium Chloride Hydrated 10108-64-2
Collodion Flexible Methylated 60-29-7
Phosphonitrilic chloride, trimer, 98% 940-71-6
N,N-dimethylformamide dipropyl acetal 98% 6006-65-1
Coniferyl Alcohol, 99% 458-35-5
3,3'-Dimethyl-1,1'-Diphenyl??4,4'-Bi-2- Pyrazoline??-5,5'-Dione 7477-67-0
3,4-Dihydroxybenzaldehyde, 97% 139-85-5
1-Benzyl-3-piperidone hydrochloride, 95+% (tlc) 50606-58-1
1-Aza-3,5-Dimethyl-4,6-Dioxabicyclo-(3.3.0)Octane, 98% 26562-68-5
n-(3-Aminopropyl)-morpholine, 98% 123-00-2
3,4,5-Trimethoxyphenol, 98.5+% 642-71-7
Aluminium foil, metal sheet 7429-90-5
Copper Metal Turnings and Granules 7440-50-8
Copper metal wire, sheet, and foil 7440-50-8
4'-Fluoropropiophenone, 97% 456-03-1
Dimidium Bromide Monohydrate, 98% 518-67-2
Praseodymium(iii) chloride hexahydrate 99.9% 17272-46-7
Cellulose Acetate Hydrogen Phthalate 9004-38-0
Sodium Persulfate, 98+% 7775-27-1
2,3-Dihydro-6-(2-hydroxyethyl)-5-methyl-
BSI Papanicolaou Stain OG-6 64-17-5
Arsenazo III (disodium salt) 62337-00-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net