Search   
MSDS 
:
 N,N-dimethylformamide dipropyl acetal 98%
CAS 
:
 6006-65-1
SYNONYMS 
:
 1,1-Dipropoxytrimethylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6006-65-1 |N,N-dimethylformamide dipropyl acetal | 98 | 227-855-4 |
| |98% | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
Vapors cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May
cause nausea and vomiting.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Remove contaminated clothing and
shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a cool, dry place.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 6006-65-1:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible. Wear appropriate protective eyeglasses or
chemical safety goggles as described by OSHA's eye and
face protection regulations in 29 CFR 1910.133 or
European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 100 deg F ( 37.78 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density:
Molecular Formula: C9H21O2N
Molecular Weight: 175.1525

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, acids, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, moisture, acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6006-65-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N,N-dimethylformamide dipropyl acetal 98% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 6006-65-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6006-65-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6006-65-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/30/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2'-Thiodiethanol 111-48-8
Methyl Blue 28983-56-4
3,3-Diphenylpropionic Acid, 97% (GC) 606-83-7
Potassium Dichromate 0.021 M to 0.0417M 7732-18-5
Potassium Hydroxide 0.05N - 0.1N (in Methanol) 67-56-1
Benzenesulfonyl hydrazide, 98% 80-17-1
2,3-Dimethoxybenzaldehyde, 97% 86-51-1
Disodium hydrogen orthophosphosphate dodecahydrate 7558-79-4
Sulfobromophthalein Sodium Tetrahydrate 71-63-6
Disodium hydrogen orthophosphate anhydrous 7558-79-4
Lotoxane
(3,4-Dimethoxyphenyl)acetonitrile, 99+% 93-17-4
3-Acetylcoumarin, 96% 3949-36-8
Tetracycline Hydrochloride 64-75-5
Prim. active amyl alcohol,99% 1565-80-6
P-Chlorovalerophenone, 98% 25017-08-7
Buffer Solution pH 6.0 1310-73-2
Buffer Solution pH 6.87 877-24-7
Buffer Solution pH 7.0 7487-94-7
Buffer Solution pH 8.0 1310-73-2
Buffer Solution pH 9.0, 9.2 7647-14-5
Buffer Solution pH 9.23 7732-18-5
Buffer Solution pH 10.0 1310-73-2
Buffer Solution pH 10.0 Color Coded Blue 76-61-9
Hydrogen Peroxide 20-40 Volumes 7722-84-1
Buffer Tablets pH 9.2 1330-43-4
Calcium nitrate anhydrous 10124-37-5
Calcium Bromide Hydrated 7789-41-5
Cadmium Chloride Hydrated 10108-64-2
Collodion Flexible Methylated 60-29-7
Phosphonitrilic chloride, trimer, 98% 940-71-6
N,N-dimethylformamide dipropyl acetal 98% 6006-65-1
Coniferyl Alcohol, 99% 458-35-5
3,3'-Dimethyl-1,1'-Diphenyl??4,4'-Bi-2- Pyrazoline??-5,5'-Dione 7477-67-0
3,4-Dihydroxybenzaldehyde, 97% 139-85-5
1-Benzyl-3-piperidone hydrochloride, 95+% (tlc) 50606-58-1
1-Aza-3,5-Dimethyl-4,6-Dioxabicyclo-(3.3.0)Octane, 98% 26562-68-5
n-(3-Aminopropyl)-morpholine, 98% 123-00-2
3,4,5-Trimethoxyphenol, 98.5+% 642-71-7
Aluminium foil, metal sheet 7429-90-5
Copper Metal Turnings and Granules 7440-50-8
Copper metal wire, sheet, and foil 7440-50-8
4'-Fluoropropiophenone, 97% 456-03-1
Dimidium Bromide Monohydrate, 98% 518-67-2
Praseodymium(iii) chloride hexahydrate 99.9% 17272-46-7
Cellulose Acetate Hydrogen Phthalate 9004-38-0
Sodium Persulfate, 98+% 7775-27-1
2,3-Dihydro-6-(2-hydroxyethyl)-5-methyl-
BSI Papanicolaou Stain OG-6 64-17-5
Arsenazo III (disodium salt) 62337-00-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net