Search   
MSDS 
:
 4-(4-Chlorophenyl)-1,2,3,6-tetra- hydropyridine hydrochloride, 97%
CAS 
:
 51304-61-1
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 51304-61-1 |4-(4-Chlorophenyl)-1,2,3,6-tetrahydrop| 97.0 | 257-126-6 |
| |yridine hydrochloride, | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Wash clothing before reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Use process enclosure, local exhaust
ventilation, or other engineering controls to control airborne
levels.
Exposure Limits
CAS# 51304-61-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: beige slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 204.00 - 206.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H12ClN.HCl
Molecular Weight: 230.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Stable at room
temperature in closed containers under normal storage and handling
conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 51304-61-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(4-Chlorophenyl)-1,2,3,6-tetrahydropyridine hydrochloride, -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 51304-61-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 51304-61-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 51304-61-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/11/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Histosolve X or Bio Clear 5989-27-5
Ethyl Alcohol-D, 99.5+ Atom % D 925-93-9
Iodine Lugols Concentrate 7553-56-2
Geometric Data Buffer, Dry (BSI) 7778-77-0
Wright Giemsa Stain 1-Step 0-00-0
4-Chlorophenylhydrazine hydrochloride 1073-70-7
D-(+)-Limonene 5989-27-5
AEBSF.HCl [4-(2-Aminoethyl)-Benzenesulfonylfluoride.HCl 30827-99-7
Actinomycin D, 93% 50-76-0
Phorbol 12-myristate 13-acetate 16561-29-8
n-Octyl-beta-D-glucopyranoside 29836-26-8
Propyl Gallate, 98% 121-79-9
3-Iodophenol, 99% 626-02-8
Actinomycin D 50-76-0
(+)-Aphidicolin 38966-21-1
Acrylomix 2.6 79-06-1
Acrylomix 3 79-06-1
Methyl (r)-3-hydroxy-3-phenylpropanoate 58692-70-9
Mercury Clean Up Kit 7761-88-8
Leishman's Stain 12627-53-1
4-(4-Chlorophenyl)-1,2,3,6-tetra- hydropyridine hydrochloride, 97% 51304-61-1
Apiezon greases
High vacuum grease
Litmus solution
3-Indolepropionic acid, 99% 830-96-6
Invertase concentrate from yeast (stabilized with glycerol) 56-81-5
Linolenic acid, 70+% (gc), remainder isome rs 463-40-1
Lysol BP disinfectant 1319-77-3
1-Acetyl-2-naphthol, 98% 574-19-6
Total Hardness Indicator Tablets 1787-61-7
Soap solution-Clark's
Hydranal Water Standard 5.0 133-20-7
Hydranal Buffer
L-Alpha-Dipalmitoyl Phosphatidylcholine,98 %
Hydranal Coulomat AG 0-00-0
Hydranal Water Standard 1.0 1330-20-7
Hydranal Coulomat A 67-56-1
1-Bromo-2-methylpropane, 98+% (gc) 78-77-3
Hydranal Coulomat AF7 67-56-1
Hydranal Composite 5 0-00-0
Hydranal Composite 2 0-00-0
Hydranal Composite 1
0.1M (0.2N) Titanium (III) Sulfate Solution 7664-93-9
Schiff's Reagent for Determination of Aldehydes 632-99-5
Methyl Red Spirit Soluble Solution 64-17-5
Methyl Red (Water Soluble) Solution 64-17-5
Orcein acetic solution 64-19-7
Monofax 057 38464-70-5
Sulfuric acid 2M - 4M solutions 7664-93-9
Florisil 1343-88-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net