Search   
MSDS 
:
 Iodine Lugols Concentrate
CAS 
:
 7553-56-2
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7553-56-2 |Iodine | 5.0 | 231-442-4 |
|----------------|--------------------------------------|----------|-----------|
| 7681-11-0 |Potassium Iodide | 10.0 | 231-659-4 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Deionized Water | <100.0 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Vapors may cause eye irritation. May cause eye irritation and
possible burns.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Exposure may cause irritation characterized by redness, dryness, and
inflammation.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. May cause epiphoria, which is an excessive flow of
tears.
Chronic:
Chronic exposure can lead to iodism characterized by salivation,
nasal discharge, sneezing, conjunctivitis, fever, laryngitis,
bronchitis, stomatitis, and skin rashes. Chronic exposure can affect
thyroid function.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water only!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels.
Exposure Limits
CAS# 7553-56-2:
United Kingdom, WEL - STEL: 0.1 ppm STEL; 1.1 mg/m3 STEL
United States OSHA: ; 0.1 ppm Ceiling; 1 mg/m3 Ceiling
Belgium - TWA: 0.1 ppm VLE; 1 mg/m3 VLE
France - VLE: 0.1 ppm VLE; 1 mg/m3 VLE
Germany: 0.1 ppm TWA; 1.1 mg/m3 TWA
Germany: Skin absorber
Japan: 0.1 ppm OEL; 1 mg/m3 OEL
Malaysia: 0.1 ppm Ceiling; 1.0 mg/m3 Ceiling
Russia: 1 mg/m3 TWA
Spain: 0.1 ppm VLA-EC; 1 mg/m3 VLA-EC
CAS# 7681-11-0:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: dark red-brown
Odor: Strong odor
pH: Not available.
Vapor Pressure: 0.305 mm Hg @25C
Viscosity: Not available.
Boiling Point: 363 deg F
Freezing/Melting Point: 237 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.03%@20C
Specific Gravity/Density: 4.93
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Potassium iodide is incompatible with charcoal + ozone, metals, and
oxidizable derivatives. Iodine is incompatible with acetaldehyde,
acetylene, aluminum + diethyl ether, ammonia, ammonia + lithium
1-heptynide, ammonia + potassium, butadiene + ethanol + mercuric
oxide. caesium oxide, dipropylmercury, ethanol + phsophorus,ethanol
+ phosphorus, formamide + pyridine + sulfur trioxide, halogens or
interhalogens, metal acetylides or carbides, metals, oxygen
diifluoride, poly(acetylene), silver azide, sodium phosphinate,
tetraamminecopper (II) sulfate + ethanol, trioxygen difluoride.
Hazardous Decomposition Products:
Oxides of potassium, iodine.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7553-56-2: NN1575000
CAS# 7681-11-0: TT2975000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 7553-56-2: Oral, mouse: LD50 = 22 gm/kg; Oral, mouse: LD50 =
1000 mg/kg; Oral, rabbit: LD50 = 10 gm/kg; Oral, rat: LD50 = 14
gm/kg.
CAS# 7681-11-0.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Iodine -
Not listed by ACGIH, IARC, or NTP.
Potassium Iodide -
Not listed by ACGIH, IARC, or NTP.
Deionized Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7553-56-2: 1
CAS# 7681-11-0: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 7553-56-2 is listed on Canada's DSL List.
CAS# 7681-11-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7553-56-2 is listed on Canada's Ingredient Disclosure List.
CAS# 7681-11-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7553-56-2 is listed on the TSCA inventory.
CAS# 7681-11-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 5/12/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Histosolve X or Bio Clear 5989-27-5
Ethyl Alcohol-D, 99.5+ Atom % D 925-93-9
Iodine Lugols Concentrate 7553-56-2
Geometric Data Buffer, Dry (BSI) 7778-77-0
Wright Giemsa Stain 1-Step 0-00-0
4-Chlorophenylhydrazine hydrochloride 1073-70-7
D-(+)-Limonene 5989-27-5
AEBSF.HCl [4-(2-Aminoethyl)-Benzenesulfonylfluoride.HCl 30827-99-7
Actinomycin D, 93% 50-76-0
Phorbol 12-myristate 13-acetate 16561-29-8
n-Octyl-beta-D-glucopyranoside 29836-26-8
Propyl Gallate, 98% 121-79-9
3-Iodophenol, 99% 626-02-8
Actinomycin D 50-76-0
(+)-Aphidicolin 38966-21-1
Acrylomix 2.6 79-06-1
Acrylomix 3 79-06-1
Methyl (r)-3-hydroxy-3-phenylpropanoate 58692-70-9
Mercury Clean Up Kit 7761-88-8
Leishman's Stain 12627-53-1
4-(4-Chlorophenyl)-1,2,3,6-tetra- hydropyridine hydrochloride, 97% 51304-61-1
Apiezon greases
High vacuum grease
Litmus solution
3-Indolepropionic acid, 99% 830-96-6
Invertase concentrate from yeast (stabilized with glycerol) 56-81-5
Linolenic acid, 70+% (gc), remainder isome rs 463-40-1
Lysol BP disinfectant 1319-77-3
1-Acetyl-2-naphthol, 98% 574-19-6
Total Hardness Indicator Tablets 1787-61-7
Soap solution-Clark's
Hydranal Water Standard 5.0 133-20-7
Hydranal Buffer
L-Alpha-Dipalmitoyl Phosphatidylcholine,98 %
Hydranal Coulomat AG 0-00-0
Hydranal Water Standard 1.0 1330-20-7
Hydranal Coulomat A 67-56-1
1-Bromo-2-methylpropane, 98+% (gc) 78-77-3
Hydranal Coulomat AF7 67-56-1
Hydranal Composite 5 0-00-0
Hydranal Composite 2 0-00-0
Hydranal Composite 1
0.1M (0.2N) Titanium (III) Sulfate Solution 7664-93-9
Schiff's Reagent for Determination of Aldehydes 632-99-5
Methyl Red Spirit Soluble Solution 64-17-5
Methyl Red (Water Soluble) Solution 64-17-5
Orcein acetic solution 64-19-7
Monofax 057 38464-70-5
Sulfuric acid 2M - 4M solutions 7664-93-9
Florisil 1343-88-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net