Search   
MSDS 
:
 2,4-Dimethyl-3-Ethylpyrrole, 96+% (GC)
CAS 
:
 517-22-6
SYNONYMS 
:
 Cryptopyrrole; 1H-Pyrrole, 3-Ethyl-2,4-Dimethyl-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 517-22-6 |2,4-Dimethyl-3-Ethylpyrrole | 96% | 208-234-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Air sensitive.Light
sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause irritation and dermatitis. May
cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Can produce delayed pulmonary edema. Inhalation at
high concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Combustible
liquid. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Store protected from light. Handle
under an inert atmosphere. Store protected from air. Wash clothing
before reuse. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Store protected from light and
air. Store under an inert atmosphere. Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 517-22-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: yellow - red-brown
Odor: characteristic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 197 deg C @ 710 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 71 deg C ( 159.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9130g/cm3
Molecular Formula: C8H13N
Molecular Weight: 123.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, light, ignition sources, exposure to air,
excess heat.
Incompatibilities with Other Materials:
Air, strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 517-22-6: UX9629500
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Dimethyl-3-Ethylpyrrole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 517-22-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 517-22-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 517-22-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N-Methyl-1-naphthalenemethylamine hydrochloride 65473-13-4
2-Chloroanthraquinone, 99% 131-09-9
1H-Benzimidazole-2-methanol, 97% 4856-97-7
3-Amino-2-naphthoic acid, tech. 85% 5959-52-4
Resorcinol, 90% (Titr.) 108-46-3
Riboflavin 98% 83-88-5
Rosin, gum 8050-09-7
Rubidium Chloride, 99+% 7791-11-9
Salicylaldehyde, 98% 90-02-8
Avidin (monomeric)-agarose 0-01-1
Methyl 2-Iodobenzoate, 99+% 610-97-9
NG-Nitro-L-arginine-methyl ester hydrochloride 51298-62-5
NG-Nitro-D-arginine-methyl ester hydrochloride 50912-92-0
Ethyl butyrate, 99% 105-54-4
2,4-Dimethyl-3-Ethylpyrrole, 96+% (GC) 517-22-6
Salicylic Acid, reagent ACS 69-72-7
Silver, Shot, 99.9999%, 1-3 mm 7440-22-4
3-Methyl-1H-pyrazole-1-carboxamide 873-50-7
Silver acetate, 90% (titr.) 563-63-3
Ammonium Pyrrolidine Dithiocarbamate 5103-42-4
7-Nitroindazole 2942-42-9
S-Nitroso-N-acetyl-D,L-penicillamine 0-01-1
Silver Chloride, 99+% 7783-90-6
Diethyldithiocarbamic acid, silver salt 1470-61-7
Silver Iodide, 99% 7783-96-2
DL-Mercaptosuccinic acid (pract), 98% (titr.) 70-49-5
S-Nitroso-L-glutathione 0-01-1
Odq, 98% 41443-28-1
PAPA NONOate 146672-58-4
PROLI/NO 0-01-1
PTIO 0-01-1
Glycine Methyl Ester Hydrochloride, 98% 5680-79-5
L-Sepiapterin 17094-01-8
Ammonium sulfate 7783-20-2
SIN-1 hydrochloride 16142-27-1
trans-2-Aminomethyl-1-cyclohexanol, 97% 5691-09-8
Brij 58 9004-95-9
Quinidine, anhydrous, 99+% 56-54-2
Silver nitrate, p.a. 7761-88-8
Thiophene, benzene free, 99.5% 110-02-1
Silver(i)oxide, p.a. 20667-12-3
Silver Sulfate, 10 g/lt Solution in Sulfuric Acid P.A. 7664-93-9
1H-Benzimidazole-2-ethanamine dihydrochloride, 97% 0-01-1
Sodium dispersion in toluene, 30 wt% < 0.1mm particle size 108-88-3
Spermine NONOate 0-01-1
(6R)-5,6,7,8-Tetrahydro-L-biopterin.dihydrochloride 69056-38-8
L-Thiocitrulline 156719-37-8
TRIM 25371-96-4
2-Chloro-3,5-Dinitrobenzoic Acid, 80% 2497-91-8
Dimethyl sulfite, 99% 616-42-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net