Search   
MSDS 
:
 m-Anisidine
CAS 
:
 536-90-3
SYNONYMS 
:
 3-Methoxyaniline
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 536-90-3 |m-Anisidine | 99+ | 208-651-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 26/27/28 33

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Not available.
Storage:
Not available.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 536-90-3:
United States OSHA: 0.5 mg/m3 TWA (listed under Anisidine (o-, p
isomers)).
Belgium - TWA: (listed as anisidine (o-, p- isomers)): 0.1 ppm VL
0.5 mg/m3 VLE
Germany: 0.5 mg/m3 TWA
Germany: Skin absorber
Netherlands: (listed as anisidine (o-, p- isomers)): 0.1 ppm MAC;
mg/m3 MAC

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1000g/cm3
Molecular Formula: NH2C6H4OCH3
Molecular Weight: 123.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, acid chlorides, acid anhydrides,
chloroformates.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 536-90-3: BZ5408000
LD50/LC50:
Not available.
Carcinogenicity:
m-Anisidine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ANISIDINES, LIQUID
Hazard Class: 6.1
UN Number: 2431
Packing Group: III
IMO
Shipping Name: ortho-ANISIDINE
Hazard Class: 6.1
UN Number: 2431
Packing Group: III
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 28B After contact with skin, wash immediately with
plenty of water and soap.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 536-90-3: No information available.
Canada
CAS# 536-90-3 is listed on Canada's NDSL List.
CAS# 536-90-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 536-90-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #2 Date: 9/20/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Trifluoroacetyl Triflate 68602-57-3
Allyltriphenylphosphonium bromide, 99% 1560-54-9
m-Anisidine 536-90-3
Glycerol formal, mixture of alpha- and beta form, 99+% 4740-78-7
4-Amino-2,3,5,6-tetrafluorobenzamide, 97% 1548-74-9
(2-Aminobenzoyl)hydrazide, 97% 1904-58-1
Reinecke salt monohydrate, reagent ACS (crystals), 93+% (gravimetry) 13573-16-5
2-Isobutyl-3-methoxypyrazine, 99% (GC) 24683-00-9
Trichloroacetic acid, sodium salt, 99% 650-51-1
1-Bromoundecane (Pract), 97% (GC) 693-67-4
Coumarin 2, Laser Grade, 99+% (UV-Vis) 26078-25-1
Methyl 2-chloroacetoacetate, 95% 4755-81-1
[(4-Fluorophenoxy)methyl]oxirane, 97% 108648-25-5
3,3-Dimethylacrylic Acid, 97% 541-47-9
N-Tert-Butylacrylamide 107-58-4
Decahydro-2-naphthol, 98%, Mixture of isomers 825-51-4
2,3-Quinoxalinedithiol 1199-03-7
Fast Blue BB, 98% 120-00-3
2,5-Dibromopyridine, 97% 624-28-2
Chlorophenol Red, Indicator Grade 4430-20-0
Lithium stearate, 95% 4485-12-5
Isobutyric Acid, P.A. 79-31-2
(2,2-Dichlorocyclopropyl)benzene, 97% 2415-80-7
P-Toluenesulfonamide 70-55-3
Benzalphthalide, 98% 575-61-1
Alpha-Bromo-2'- Acetonaphthone, 98% 613-54-7
D-(+)-Digitoxose, 99+% 527-52-6
(S)-(+)-2-Hydroxy-3-methylbutanoic acid, 99+% 17407-55-5
Methyl formate, spectro grade, 98% 107-31-3
5,6,11,12-Tetrahydrodibenz(b,f)Azocin-- 6-One 6047-29-6
Bis(cyclopentadienyl)zirconium dichloride, 98+% 1291-32-3
4-Oxo-3-Aza-Tricyclo-(4.2.1.0(2,5))Nonane, 99+% 0-01-1
2-Nitrobenzoyl Chloride, 95% 610-14-0
Chrysanthemyl alcohol, 98%, mixture of cis and trans 18383-59-0
2-Nitrobenzenesulfonamide, 96% 5455-59-4
(R)-3-Isopropyl-2,5-Piperazinedione 143673-66-9
2,2'-Azodiphenol, 99% (UV-Vis) 2050-14-8
Coronene 191-07-1
Alpha, Alpha, Alpha-Trifluoro-O-Tolyl Isocyanate, 97% 2285-12-3
Isovaleryl Chloride, 98% 108-12-3
2-(4-Tolyl)malondialdehyde, 97% (GC) 27956-35-0
4-Nitrobenzoic acid, 99+% 62-23-7
1,2,3-Trichlorobenzene, 99% 87-61-6
Phenyl N-Phenylphosphoramidochloridate, 99+% 51766-21-3
Alpha-Acetoxy-Isobutyryl Chloride, 97% 40635-66-3
2-Fluorobenzotrichloride, 99% 488-98-2
6-Nitrochrysene, 99% 7496-02-8
2-Chloroethyl-p-toluenesulfonate, 97% 80-41-1
Kinetin 525-79-1
2,4-Dimethyl-1,3-pentadiene, 98% 1000-86-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net