Search   
MSDS 
:
 Propyl Isothiocyanate, 98%
CAS 
:
 628-30-8
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 628-30-8 |Propyl Isothiocyanate | 98% | 211-035-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if
swallowed. Causes burns.Moisture sensitive.Corrosive.Highly
flammable.Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Vapors may cause dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Get medical aid immediately. Flush skin with plenty
of water for at least 15 minutes while removing contaminated clothing
and shoes. Immediately flush skin with plenty of water for at least
15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Water may spread fire. If water
is the only media available, use in flooding amounts. Do NOT get
water inside containers. Do NOT use straight streams of water. Cool
containers with flooding quantities of water until well after fire
is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal. Remove all sources of ignition. Provide ventilation. Do not
get water inside containers. A vapor suppressing foam may be used to
reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Do not breathe dust, vapor, mist, or gas.
Do not get in eyes, on skin, or on clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not get on skin or in eyes. Avoid ingestion and inhalation. Do not
ingest or inhale. Use with adequate ventilation. Do not allow contact
with water. Use only in a chemical fume hood. Discard contaminated
shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep from
contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from heat and
flame. Keep away from sources of ignition. Keep container closed
when not in use. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 628-30-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 153 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -15 deg C ( 5.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9780g/cm3
Molecular Formula: C4H7NS
Molecular Weight: 101.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 628-30-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Propyl Isothiocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2924
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3.2 (8)
UN Number: 2924
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2924
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 27 Take off immediately all contaminated clothing.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 628-30-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 628-30-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 628-30-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/04/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3'-Fluoro-4'-methoxyacetophenone, 99% 455-91-4
1,4-Cyclohexanebis(methylamine) (pract) cis and trans mixture, 95% 2549-93-1
Benzyl-2-bromoacetate, 96% 5437-45-6
n-(tert-Butoxycarbonyl)ethanolamine, 98% 26690-80-2
DL-2,4-Diaminobutyric acid dihydrochloride , 98% 65427-54-5
n-Acetyl-l-tryptophan ethyl ester, 99% 2382-80-1
1,2-Pentanediol, 97% 5343-92-0
Methyl 5-bromovalerate, 97% 5454-83-1
Ethyl P-Nitrocinnamate, 99% Predominantly Trans 953-26-4
Ethyl 6-bromohexanoate, 99% 25542-62-5
2-BROMO-4-FLUOROANILINE, 97% 1003-98-1
d-Xylonic gamma-lactone, 96% 15384-37-9
6-Bromo-2-Naphthyl-Beta-D-Galactopyranoside, 98% 15572-30-2
d-Trehalose anhydrous 6138-23-4
2-(P-Toluenesulfonyl)Ethanol 22381-54-0
D-Glucuronic Acid, 98% 6556-12-3
DL-Lysine, 98% 70-54-2
(s)-(+)-2-(Methoxymethyl)pyrrolidine, 99% 63126-47-6
1,1-Diphenylhydrazine hydrochloride, 99% 530-47-2
4-Iodo-D-phenylalanine, monohydrate, 97% 0-00-1
L-Iditol, 99% 488-45-9
N-(9-Fluorenylmethoxycarbonyl)-L-Phenylalanine Pentafluorophenyl 86060-92-6
N-(9-Fluorenylmethoxycarbonyl)-L-Valine Pentafluorophenyl Ester, 97% 86060-87-9
N-(9-Fluorenylmethoxycarbonyl)glycine Pentafluorophenyl Ester, 97% 86060-85-7
N-Epsilon-(Tert-Butoxycarbonyl)-L-Lysine, 97% 2418-95-3
N-Alpha-(Tert-Butoxycarbonyl)-L-Lysine, 99% 13734-28-6
L-Leucine-4-Nitroanilide, 99% 4178-93-2
Vinyl chloroformate, 99%, stabilized with 50-100 ppm BHT 5130-24-5
o-(5-Norbornene-2,3-dicarboximido)-n,n,n', n'-tetramethyluronium bf4, 125700-73-4
O-((Ethoxycarbonyl)Cyanomethyleneamino)-N, N,N',N'-Tetramethyluronium 136849-72-4
l-Aspartyl-l-phenylalanine 13433-09-5
Dodecanedioyl Dichloride, 98% 4834-98-4
2,2,2-Trifluoroethanesulfonyl Chloride, 99 % 1648-99-3
2-Bromo-2-methylbutane, 95% 507-36-8
3-Doxyl-5-Alpha-Cholestane, Free Radical, 98% 18353-76-9
3-Bromopentane, 97% 1809-10-5
2-Bromovaleric acid, 98% 584-93-0
(S)-(+)-1-Iodo-2-Methylbutane, 99% 29394-58-9
2-Bromophenyl Isothiocyanate, 98% 13037-60-0
3-Bromophenyl Isothiocyanate, 97% 2131-59-1
Phenyl 2-(trimethylsilyl)ethyl sulfone, 99+% 73476-18-3
2,4-Dichlorophenyl Isothiocyanate, 95% 6590-96-1
2-Fluorophenyl Isothiocyanate, 98% 38985-64-7
4-Methoxyphenyl Isothiocyanate, 98% 2284-20-0
Propyl Isothiocyanate, 98% 628-30-8
2-Ethylhexyl Bromide, 95% 18908-66-2
1,2,3-Tribromopropane, 97% 96-11-7
Iron (II) Acetate, 95% 3094-87-9
1,2-Dibromobutane, 97% 533-98-2
2,3-Dibromobutane, 99%, Mixture of (+/-) and Meso 5408-86-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net