Search   
MSDS 
:
 1-Hexadecene, tech., 92%, alpha-olefin c16
CAS 
:
 629-73-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 629-73-2 |1-Hexadecene | 92% | 211-105-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 65

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful: may cause lung damage if swallowed.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Contact with the skin may cause erythema
(redness), dryness, and defatting.
Ingestion:
May cause irritation of the digestive tract. Aspiration of material
into the lungs may cause chemical pneumonitis, which may be fatal.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out
with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Take precautionary measures against
static discharges. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames. Pressurized containers may explode.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 629-73-2:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.003 mm Hg @ 2
Viscosity: 3.83 cSt @ 20 deg C
Boiling Point: 274 deg C @ 760 mmH
Freezing/Melting Point: 3 - 5 deg C
Autoignition Temperature: 224 deg C ( 435.20 deg F)
Flash Point: 132 deg C ( 269.60 deg F)
Explosion Limits, lower: 0.5 vol %
Explosion Limits, upper: 5.8 vol %
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .7830g/cm3
Molecular Formula: C16H32
Molecular Weight: 224.43

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, chlorates, nitrates, peroxides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 629-73-2: MM0479000
LD50/LC50:
Not available.
Carcinogenicity:
1-Hexadecene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 65 Harmful: may cause lung damage if swallowed.
Safety Phrases:
S 62 If swallowed, do not induce vomiting: seek
medical advice immediately and show this container or
label.
WGK (Water Danger/Protection)
CAS# 629-73-2: No information available.
Canada
CAS# 629-73-2 is listed on Canada's DSL List.
CAS# 629-73-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 629-73-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/06/2000 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Bromovinyl)trimethylsilane 13683-41-5
Beta-Cyclodextrin 7585-39-9
Chromium(III) benzoylacetonate 16432-36-3
Trans-1-Decalone, 98% 21370-71-8
1-Phenylpiperazine hydrochloride, 97% 2210-93-7
2,6-Diformyl-4-Chlorophenol, 99% 32596-43-3
2,3-Diethyl-5-methylpyrazine, 99% 18138-04-0
(1R,2S)-(-)-Ephedrine, 98.5% (Dry Substance) 299-42-3
3,3'-Diethylthiadicarbocyanine Iodide, Laser Grade, 99% (UV-VIS) 514-73-8
Palladium-Poly(Ethylenimine), Silica Gel Supported Powder, 40-200 0-01-1
1,5-Pentanedithiol, 98% 928-98-3
4-Methyl-1-cyclohexene, 97% 591-47-9
Benzyltriethylammonium Bromide, 99% 5197-95-5
3-methylanisole, 99% 100-84-5
2,4,4-Trimethyl-1-pentene, 99% 107-39-1
N,N'-Bis(Methoxymethyl)Diaza-18-Crown-6 97% 0-01-1
Trimethylacetic anhydride, 99% 1538-75-6
Ethyl 3-endo-aminobicyclo [2,2,1] heptane-2-endo-carboxylate 95630-76-5
p-Ethyltoluene, 98% 622-96-8
Folinic Acid, Calcium Salt Pentahydrate, 85.0-110.0%, HPLC (on dried 1492-18-8
Mesityl oxide, 91% (gc) 141-79-7
Acetyl Methyl Carbinol (Pract), 93% (Titr.) 513-86-0
2-Carboxybenzaldehyde, 99% 119-67-5
Copper(i) iodide, 98% 7681-65-4
5-Vinyl-2-Norbornene, Tech. 3048-64-4
1-Hexadecene, tech., 92%, alpha-olefin c16 629-73-2
5-Amino-4,6-Dichloropyrimidine, 97% 5413-85-4
2-(2-Chlorophenyl)ethylamine, 98% 13078-80-3
Carbobenzoxyhydrazide, 98% 5331-43-1
Butyl acrylate, 99% (GC) 141-32-2
Diphenyl methyl phosphine, 98% (gc) 1486-28-8
Lithium Cyclohexanebutyrate 62638-00-0
3,4-Dichloroanisole, 99+% 36404-30-5
d-Valine, 98+% 640-68-6
2,5-Di-Tert-Butylhydroquinone, 99% (Titr.) 88-58-4
1-Iodohexane, 97% (gc) 638-45-9
4-Fluorobenzylamine, 97+% 140-75-0
Trimethylsilylisocyanate, 97% 1118-02-1
alpha-Ethylphenethyl alcohol, 97% 701-70-2
Chromotropic Acid Disodium Salt Dihydrate 5808-22-0
Silver(I) Fluoride, 99+% 7775-41-9
4-Fluorophenoxyacetic acid, 99+% 405-79-8
Propionaldehyde diethyl acetal, 97% 4744-08-5
1-Fluoro-2-iodobenzene, 99% 348-52-7
Methyl 4-Oxo-3-Piperidinecarboxylate Hydrochloride, 98% (TLC) 56026-52-9
10-Chloro-9-Anthraldehyde, 97% 10527-16-9
4-Bromo-2-Methylaniline, 97% 583-75-5
9-Aminoacridine hydrochloride monohydrate, 99+% 134-50-9
4,4'-bis(dimethylamino)benzhydrol, tech., 85% (dry subst.) 119-58-4
Methyl 4-hydroxyphenylacetate, 99% 14199-15-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net