Search   
MSDS 
:
 1-Iodohexane, 97% (gc)
CAS 
:
 638-45-9
SYNONYMS 
:
 Hexyl iodide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 638-45-9 |1-Iodohexane, 99% | | 211-339-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 638-45-9:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless to light yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 83 deg C @ 30.00mm Hg
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: 152.6 deg F ( 67.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.4000g/cm3
Molecular Formula: C6H13I
Molecular Weight: 212.07

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases - light.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen iodide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 638-45-9: MO3855000
LD50/LC50:
Not available.
Carcinogenicity:
1-Iodohexane, 99% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 638-45-9: No information available.
Canada
CAS# 638-45-9 is listed on Canada's DSL List.
CAS# 638-45-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 638-45-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Bromovinyl)trimethylsilane 13683-41-5
Beta-Cyclodextrin 7585-39-9
Chromium(III) benzoylacetonate 16432-36-3
Trans-1-Decalone, 98% 21370-71-8
1-Phenylpiperazine hydrochloride, 97% 2210-93-7
2,6-Diformyl-4-Chlorophenol, 99% 32596-43-3
2,3-Diethyl-5-methylpyrazine, 99% 18138-04-0
(1R,2S)-(-)-Ephedrine, 98.5% (Dry Substance) 299-42-3
3,3'-Diethylthiadicarbocyanine Iodide, Laser Grade, 99% (UV-VIS) 514-73-8
Palladium-Poly(Ethylenimine), Silica Gel Supported Powder, 40-200 0-01-1
1,5-Pentanedithiol, 98% 928-98-3
4-Methyl-1-cyclohexene, 97% 591-47-9
Benzyltriethylammonium Bromide, 99% 5197-95-5
3-methylanisole, 99% 100-84-5
2,4,4-Trimethyl-1-pentene, 99% 107-39-1
N,N'-Bis(Methoxymethyl)Diaza-18-Crown-6 97% 0-01-1
Trimethylacetic anhydride, 99% 1538-75-6
Ethyl 3-endo-aminobicyclo [2,2,1] heptane-2-endo-carboxylate 95630-76-5
p-Ethyltoluene, 98% 622-96-8
Folinic Acid, Calcium Salt Pentahydrate, 85.0-110.0%, HPLC (on dried 1492-18-8
Mesityl oxide, 91% (gc) 141-79-7
Acetyl Methyl Carbinol (Pract), 93% (Titr.) 513-86-0
2-Carboxybenzaldehyde, 99% 119-67-5
Copper(i) iodide, 98% 7681-65-4
5-Vinyl-2-Norbornene, Tech. 3048-64-4
1-Hexadecene, tech., 92%, alpha-olefin c16 629-73-2
5-Amino-4,6-Dichloropyrimidine, 97% 5413-85-4
2-(2-Chlorophenyl)ethylamine, 98% 13078-80-3
Carbobenzoxyhydrazide, 98% 5331-43-1
Butyl acrylate, 99% (GC) 141-32-2
Diphenyl methyl phosphine, 98% (gc) 1486-28-8
Lithium Cyclohexanebutyrate 62638-00-0
3,4-Dichloroanisole, 99+% 36404-30-5
d-Valine, 98+% 640-68-6
2,5-Di-Tert-Butylhydroquinone, 99% (Titr.) 88-58-4
1-Iodohexane, 97% (gc) 638-45-9
4-Fluorobenzylamine, 97+% 140-75-0
Trimethylsilylisocyanate, 97% 1118-02-1
alpha-Ethylphenethyl alcohol, 97% 701-70-2
Chromotropic Acid Disodium Salt Dihydrate 5808-22-0
Silver(I) Fluoride, 99+% 7775-41-9
4-Fluorophenoxyacetic acid, 99+% 405-79-8
Propionaldehyde diethyl acetal, 97% 4744-08-5
1-Fluoro-2-iodobenzene, 99% 348-52-7
Methyl 4-Oxo-3-Piperidinecarboxylate Hydrochloride, 98% (TLC) 56026-52-9
10-Chloro-9-Anthraldehyde, 97% 10527-16-9
4-Bromo-2-Methylaniline, 97% 583-75-5
9-Aminoacridine hydrochloride monohydrate, 99+% 134-50-9
4,4'-bis(dimethylamino)benzhydrol, tech., 85% (dry subst.) 119-58-4
Methyl 4-hydroxyphenylacetate, 99% 14199-15-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net