**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 63175-96-2 |5,6-Dichloro-1-ethyl-2-methyl-3-(3- su| 98.0 | 263-982-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Do not breathe dust, vapor, mist, or gas. Do
not get in eyes, on skin, or on clothing. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Keep refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 63175-96-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149. Follow the
OSHA respirator regulations found in 29 CFR 1910.134
or European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or other
symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: slightly beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 152 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H9BClF4NO
Molecular Weight: 269.42
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, contact with water, exposure to moist air or
water.
Incompatibilities with Other Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide,
hydrogen fluoride gas, oxides of boron.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 63175-96-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5,6-Dichloro-1-ethyl-2-methyl-3-(3- sulfobutyl)benzimidazoli -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 63175-96-2: No information available.
Canada
CAS# 63175-96-2 is listed on Canada's NDSL List.
CAS# 63175-96-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 63175-96-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-(Pyrrolidinocarbonylmethyl)piperazine, 95+%
| 39890-45-4 |
|
Procion blue HB
| 12236-82-7 |
|
Cyclopentadienyliron Dicarbonyl Dimer, 99%
| 38117-54-3 |
|
Bis(6-carboxypentyl-2,4,5-trichlorophenyl) oxalate
| 75203-51-9 |
|
Benzenesulfonamide, 97% (titr.)
| 98-10-2 |
|
(s)-(+)-Methyl mandelate, 98+%
| 21210-43-5 |
|
1-Monobutyrin (Pract)
| 557-25-5 |
|
1,5-Dibromo-3-Methylpentane, 98%
| 4457-72-1 |
|
(s)-(+)-2-Methylbutyric acid 98%
| 1730-91-2 |
|
6-Nitropiperonal, 98+%
| 712-97-0 |
|
Allyl Bromide, Stabilized with Ca. 300 ppm Propylene Oxide, 99%
| 106-95-6 |
|
6-Chloropurine, 99+%
| 87-42-3 |
|
1,4-Butanedithiol, 94%
| 1191-08-8 |
|
All-Trans-Retinal, 99% (UV-VIS)
| 0-00-1 |
|
1,1,4,7,7-Pentamethyldiethylenetriamine, 99+% (GC)
| 3030-47-5 |
|
Ethyl 3-(methylthio)propionate, 99+%
| 13327-56-5 |
|
1,1,1-Trifluoroacetone, 98+%
| 421-50-1 |
|
Acrylamide-bis premix 37.5:1 (2.6% concentration)
| 79-06-1 |
|
Aniline-2,3,4,5,6-d5, 99+ atom% D
| 4165-61-1 |
|
4-Fluorophenyl sulfone, 99%
| 383-29-9 |
|
1,2-Dibromoethylene, 98%, mixture of cis and trans
| 540-49-8 |
|
1-Methyl-2-formylbenzimidazole, 99+%
| 3012-80-4 |
|
4-Aminobenzo-15-Crown-5, Hydrochloride, 98%
| 0-00-1 |
|
2-Methylthio-2-imidazoline hydriodide, 99%
| 5464-11-9 |
|
Ethyl 2-bromoisobutyrate, 98%
| 600-00-0 |
|
Sarcosine, 98%
| 107-97-1 |
|
Phenyl vinyl sulfide, 97%
| 1822-73-7 |
|
5-Hydroxy-2-methyl-3-trifluoromethyl-1H-pyrazole, 99+%
| 0-01-1 |
|
3-Chloropyridine, 99%
| 626-60-8 |
|
2-Chloro-3-ethylbenzoxazolium tetrafluoro- borate, 97%
| 63175-96-2 |
|
1-Naphtaldehyde, 99% (gc)
| 66-77-3 |
|
2-Chloromercuri-4-nitrophenol
| 24579-90-6 |
|
Ethylenediamine Tetraacetic Acid, Dipotassium Salt Dihydrate
| 2001-94-7 |
|
Hydroxybutyl methyl cellulose
| 9041-56-9 |
|
1-Methyl-2-Pyrroleacetonitrile, 95%
| 24437-41-0 |
|
DL-Alanyl-DL-alanine
| 2867-20-1 |
|
1,8-Naphthalic anhydride, 97%
| 81-84-5 |
|
2-Iodo-1,1,1-trifluoroethane, 99%
| 353-83-3 |
|
Tetrapentylammonium Bromide, 99+%
| 866-97-7 |
|
4-Chromanone, 96%(GC)
| 491-37-2 |
|
1,2-Dimethoxy-4-(2-Propenyl)Benzene, 98%
| 93-15-2 |
|
Boc-Sarcosine, 99+%
| 13734-36-6 |
|
[Bis(trimethylsilyl)]sulfide, 98%
| 3385-94-2 |
|
Bicyclo(3.3.1)Nonan-9-One, 99%
| 17931-55-4 |
|
4-Bromo-o-xylene, tech. 75-80% (remainder 3-bromo-o-xylene)
| 576-23-8 |
|
4,4'-Oxydiphenol, 99%
| 1965-09-9 |
|
Anthranilonitrile, 98%
| 1885-29-6 |
|
Fmoc-L-Proline, 99%
| 71989-31-6 |
|
L-(+)-2-Amino-6-Phosphonohexanoic Acid 98% e.e.
| 0-00-1 |
|
DL-2-Aminobutyric Acid, 99+%
| 2835-81-6 |
|
|