Search   
MSDS 
:
 3-Aminophenylboronic acid hemisulfate, 98%
CAS 
:
 66472-86-4
SYNONYMS 
:
 3-Aminobenzeneboronic acid hemisulfate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 66472-86-4 |3-Aminophenylboronic acid hemisulfate | 98 | 266-376-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Keep refrigerated. (Store below
4C/39F.) Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 66472-86-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H8NO2B.0.5H2SO4
Molecular Weight: 186.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
oxides of boron, borane.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 66472-86-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Aminophenylboronic acid hemisulfate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 66472-86-4: No information available.
Canada
CAS# 66472-86-4 is listed on Canada's DSL List.
CAS# 66472-86-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 66472-86-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 1/27/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
D-Cystine, 98% 349-46-2
2,5-Dimethylthiophene, 98.5% 638-02-8
D-gamma-Tocopherol, 95% 54-28-4
Vanadium(V) oxide 1314-62-1
2-Phenyl-1H-Inden-1,3(2H)-Dione, 99% 83-12-5
3-Aminophenylboronic acid hemisulfate, 98% 66472-86-4
1,1,4,4-Tetraethoxy-2-Butyne, 99% 3975-08-4
3-Bromobenzonitrile, 99% 6952-59-6
Rink's Resin 0-01-1
Manganese(II) sulfate powder 7487-88-9
trans-4,4-Dimethyl-2-pentene 102-71-6
FisherBrand Hemo-De 5989-27-5
2,6-Bis(Hydroxymethyl)-P-Cresol 91-04-3
Potassium Nitrate 1M Solution 7732-18-5
Millon's Reagent 7697-37-2
2-Chloroacrylonitrile, 99% (stabilized with ca. 500 ppm hydroquinone) 123-31-9
Chloramine T Trihydrate 7080-50-4
Calcium Stearate 1592-23-0
Zinc Metal (Shot, Sticks, Pieces and Sheet) 7440-66-6
Phenolphthalein Solution 1% 67-63-0
Iodine Solution 0.1 N 7553-56-2
Sodium Carbonate 0.1 N Solution 497-19-8
Methyl Violet 2B 8004-87-3
Hydrochloric Acid 0.01 to 2.0N 7647-01-0
Potassium pyrosulfate, p.a. 7790-62-7
1,3-Dibromo-5-fluorobenzene, 98% 1435-51-4
Quercetin dihydrate, 99% 6151-25-3
Aitch-tu-ess Cartridge 7704-34-9
1,3-Diphenylacetone-P-Tosylhydrazone, 98% 19816-88-7
Ferric Sulfate Monohydrate 10028-22-5
Tri-p-Tolyl Phosphate, 98% (GC) 78-32-0
Formic acid 64-18-6
Ammonia 1336-21-6
Ethidium bromide solution 1239-45-8
Tris Glycine, 10X Powder 56-40-6
Sodium Dodecyl Sulfate 20% Solution 7732-18-5
PAGE Solution 57-13-6
Saline Sodium Citrate 20X Solution 6132-04-3
Saline-Sodium Phospate-EDTA 20X Solution 60-00-4
Tris Acetate EDTA 1X to 25X Solutions 77-86-1
Tris Acetate EDTA 25X Powder 64-02-8
Tris Borate EDTA 10X Solution 60-00-4
Tris Borate EDTA 10X Powder 60-00-4
Tris Borate EDTA Extended Range 10X Solution 60-00-4
Tris EDTA 100X Solution 60-00-4
Tris EDTA 100X Powder 60-00-4
Tris Glycine SDS 1X to 10X Solution 56-40-6
Saline Sodium Citrate 20X Powder 68-04-2
Tris Glycine SDS 10X Powder 56-40-6
2,4,5-Trimethoxybenzoic acid, 99% 490-64-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net