**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7789-67-5 |Tin(IV) Bromide | 99% | 232-184-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause cardiac disturbances. May cause central nervous
system effects. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause systemic effects. Central nervous
system effects, which appear to predominate in acute cases are
characterized by abnormal fatigue, memory difficulties and
dizziness.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
DO NOT USE WATER! Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow
contact with water. Use only in a chemical fume hood. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Corrosives area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7789-67-5:
United Kingdom, WEL - TWA: (listed as tin inorganic compounds): 2
mg/m3 TWA (except SnH4, as Sn)
United Kingdom, WEL - STEL: (listed as tin inorganic compounds):
mg/m3 STEL (except SnH4, as Sn)
United States OSHA: 2 mg/m3 TWA (as Sn) (listed under Tin inorga
compounds).
Belgium - TWA: (listed as tin inorganic compounds): 2 mg/m3 VLE (
Sn)
Malaysia: (listed as tin inorganic compounds): 2 mg/m3 TWA (as Sn
except tin hydride)
Netherlands: (listed as tin inorganic compounds): 2 mg/m3 MAC (as
Spain: (listed as tin inorganic compounds): 2 mg/m3 VLA-ED (as Sn
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 202 deg C @ 760.00mmHg
Freezing/Melting Point: 31 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts with water
Specific Gravity/Density: 3.3400g/cm3
Molecular Formula: SnBr4
Molecular Weight: 438.32
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. May decompose on
exposure to moist air or water.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, strong acids.
Hazardous Decomposition Products:
Hydrogen bromide, tin/tin oxides.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7789-67-5: XP8300000
LD50/LC50:
Not available.
Carcinogenicity:
Tin(IV) Bromide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Fish: Pseudomonas putida:
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7789-67-5: No information available.
Canada
CAS# 7789-67-5 is listed on Canada's NDSL List.
CAS# 7789-67-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7789-67-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Acetylfuran, 99%
| 1192-62-7 |
|
Alizarin Complexon
| 3952-78-1 |
|
1-Phenylnaphthalene, 96% (gc)
| 605-02-7 |
|
Tetraphenylarsonium chloride monohydrate, p.a.
| 104170-16-3 |
|
VMA, 99%
| 55-10-7 |
|
3-Aminophthalimide
| 2518-24-3 |
|
Fast blue bb salt
| 15518-68-0 |
|
(R)-4-Ethenyl-1,3-Dioxolan-2-One, 99% (GC)
| |
|
Ammonium Hexachloroosmate(IV)
| 12125-08-5 |
|
3-Chloropropionaldehyde diethyl acetal, tech.
| 35573-93-4 |
|
Tin(IV) Bromide, 99%
| 7789-67-5 |
|
2-Amino-6-Chloropurine-9-Riboside, 99%
| 2004-07-1 |
|
Cyclopropylamine, 99% (GC)
| 765-30-0 |
|
3-Phenyl-1-propanol, 98%
| 122-97-4 |
|
4-Chloro-2-methylphenol, 97%
| 1570-64-5 |
|
2,6-Dichloroaniline, 98%
| 608-31-1 |
|
1,3-Dimethoxy-4-tert-butylcalix[4]arene, 99% (tlc)
| 122406-45-5 |
|
Tetrabutylammonium Hydrogen Sulfate Premixed Concentrate (low UV)
| 32503-27-8 |
|
1-Phenyl-1,2-propanedione, 99%
| 579-07-7 |
|
1-Methyl-2-pyridone, 99+%
| 694-85-9 |
|
3-Buten-2-ol, 99%
| 598-32-3 |
|
2,5-Dihydroxy-p-benzoquinone, 98%
| 615-94-1 |
|
4-Methylpyrazole, 99%
| 7554-65-6 |
|
3-Bromo-2-chlorothiophene,97%
| 40032-73-3 |
|
2,6-Dichlorobenzyl Methyl Ether, 98%
| 33486-90-7 |
|
(S)-(-)-2-Azetidinecarboxylic Acid, 99+%
| 2133-34-8 |
|
1,5-Dichloroanthraquinone, 96%
| 82-46-2 |
|
Methyl p-toluenesulfonate, 97%
| 80-48-8 |
|
Benzoic Anhydride, 98%
| 93-97-0 |
|
2-Naphthoic acid, 99%
| 93-09-4 |
|
N-Benzylpseudopelletierine, 96%
| 0-00-1 |
|
3-(Trifluoromethoxy)benzaldehyde
| 52771-21-8 |
|
(R)-(-)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 98+%
| 58879-33-7 |
|
Diethyl 1,1-cyclopropanedicarboxylate, 97%
| 1559-02-0 |
|
Phenyl Phosphate, Disodium Salt Sesquihydrate, 93% (UV-VIS)
| 3279-54-7 |
|
1-Methyl-2-tetralone, tech., 90%
| 4024-14-0 |
|
4-Ethylnitrobenzene, 99+%
| 100-12-9 |
|
Toluene-d8, 100.0 atom % D
| 2037-26-5 |
|
2-Chloro-N-(2,6-Dichlorophenyl)-Acetamide 99%
| 3644-56-2 |
|
2-Aminoethyl Hydrogen Sulfate, 99% (Titr.)
| 926-39-6 |
|
2-Isobutylthiazole, 99%
| 18640-74-9 |
|
Tris(hydroxymethyl)aminomethane
| 77-86-1 |
|
1-Phenyl-1-propyne, 99%
| 673-32-5 |
|
Methyl 2-furoate, 98%
| 611-13-2 |
|
Hexyl Alcohol (Pract), 96% (GC)
| 111-27-3 |
|
N,N-Diethylacetamide, 99%
| 685-91-6 |
|
Ammonium Hexafluorogermanate(IV), 99.999%
| 16962-47-3 |
|
2-Butyn-1-Al Diethyl Acetal, 98%
| 2806-97-5 |
|
1,3-Diphenoxybenzene, 99% (GC)
| 3379-38-2 |
|
Sodium Phosphate Tribasic Dodecahydrate
| 7601-54-9 |
|
|