**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 79-31-2 |Isobutyric Acid | 100 % | 201-195-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN C
Risk Phrases: 10 21/22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Harmful in contact with skin and if swallowed. Causes
burns.Corrosive.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the
digestive tract. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Vapors may cause
dizziness or suffocation.
Chronic:
None
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Will burn if involved in a fire.
Use water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Do NOT use water directly on fire. Use water
spray to cool fire-exposed containers. Water may be ineffective. Do
NOT get water inside containers. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal. Remove all sources of ignition. Use a spark-proof tool.
Provide ventilation. Do not get water inside containers. A vapor
suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use only in a
well-ventilated area. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Do not
get in eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Do not ingest or inhale. Do not allow
contact with water. Discard contaminated shoes. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames. Keep from contact with moist air and
steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Flammables-area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 79-31-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Pungent odor of rancid butter.
pH: Not available.
Vapor Pressure: 1.0 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 154 deg C
Freezing/Melting Point: -47 deg C
Autoignition Temperature: 500 deg C ( 932.00 deg F)
Flash Point: 55 deg C ( 131.00 deg F)
Explosion Limits, lower: 2.0
Explosion Limits, upper: 9.0
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 0.949
Molecular Formula: C4H8O2
Molecular Weight: 88.0548
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, mechanical shock, incompatible materials, ignition
sources, moisture, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 79-31-2: NQ4375000
LD50/LC50:
CAS# 79-31-2: Oral, rat: LD50 = 280 uL/kg; Skin, rabbit: LD50 = 500
uL/kg.
Carcinogenicity:
Isobutyric Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ISOBUTYRIC ACID
Hazard Class: 3
UN Number: 2529
Packing Group: III
IMO
Shipping Name: ISOBUTYRIC ACID
Hazard Class: 3
UN Number: 2529
Packing Group: III
RID/ADR
Shipping Name: ISOBUTYRIC ACID
Hazard Class: 3
UN Number: 2529
Packing group: III
USA RQ: CAS# 79-31-2: 5000 lb final RQ (Listed under Butyric acid); 2270 kg fina
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN C
Risk Phrases:
R 10 Flammable.
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 50A Do not mix with acids.
WGK (Water Danger/Protection)
CAS# 79-31-2: 1
Canada
CAS# 79-31-2 is listed on Canada's DSL List.
CAS# 79-31-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79-31-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/26/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|