Search   
MSDS 
:
 Cyclooctene, 99% (GC)
CAS 
:
 931-86-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 931-86-2 |5-azacytosine | 99 | 213-242-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep away from heat, sparks and flame. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 931-86-2:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear safety glasses and
chemical goggles if splashing is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless to light brown
Odor: none reported
pH: Not available.
Vapor Pressure: 8 mbar @ 20 C
Viscosity: Not available.
Boiling Point: 33 deg C @ 7.00mm Hg
Freezing/Melting Point: -16 deg C
Autoignition Temperature: Not available.
Flash Point: 77 deg F ( 25.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8500g/cm3
Molecular Formula: C8H14
Molecular Weight: 110.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 931-86-2: XZ2854300
LD50/LC50:
Not available.
Carcinogenicity:
5-azacytosine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 931-86-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 931-86-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 931-86-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #4 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cyclooctene, 99% (GC) 931-86-2
Paraffin wax (granular) 8002-74-2
Mineral oil 8042-47-5
Celite 521 61790-53-2
Celatom FW-50 60676-86-0
Celatom FW-60 60676-86-0
Celatom FW-80 60676-86-0
1-Penten-3-ol, 99% 616-25-1
Dimethyl Isophthalate, 99% 1459-93-4
2,5-Dimethylphenol, 99+% 95-87-4
Dl-3-octanol, 99+% 589-98-0
Dowex 50x2-100 Ion-Exchange Resin 12612-37-2
Dowex 50x2-400 Ion-Exchange Resin 12612-37-2
meso-2,3-Dibromosuccinic acid 526-78-3
Methylene Blue trihydrate, 95% 61-73-4
Gum arabic 9000-01-5
Propionaldehyde, 97% 123-38-6
Allyl ethyl ether, 95% 557-31-3
n-Nonaphenone, 98% (gc) 6008-36-2
Indole-3-acetic acid hydrazide, 97% 5448-47-5
Acetamide, P.A. 60-35-5
Acetanilide, 99+% 103-84-4
Acetic anhydride, 99+% 108-24-7
Acetic anhydride, reagent ACS, 97+% 108-24-7
n-(2-Acetamidophenethyl)-1-hydroxy-2- naphthamide 5254-41-1
Epsilon-caprolactone monomer, 99% 502-44-3
1,1,2,2-Tetrabromoethane, 99% 79-27-6
Acrylamide, 98.5% 79-06-1
Agarose, Pure Powder (MR = -0.10) 9012-36-6
Agarose, Pure Powder (MR = -0.02) 9012-36-6
Agarose, Pure Powder (MR = -0.25) 9012-36-6
Agarose, Pure Powder (MR = -0.17) 9012-36-6
Agarose, Pure Powder (MR = -0.13+/- 0.01) 9012-36-6
Agarose LE 9012-36-6
Agarose ME 9012-36-6
Gibberellic Acid, 90+% 77-06-5
Gibberellic Acid (in Dibasic Ammonium Phosphate) 77-06-5
Aluminon, p.a. 569-58-4
Aluminum ammonium sulfate dodecahydrate, 99% 7784-25-0
5-Methoxy-2-mercaptobenzimidazole, 99+% (HPLC) 37052-78-1
2-Pentanone 98+% 107-87-9
Ethyl 2-amino-4,5,6,7-tetrahydrobenzo(b)thiophene-3-carboxylate, 97% 4506-71-2
Aluminum chloride, anhydrous, granules, 99% 7446-70-0
Aluminum Oxide, Activated, Basic, for Column Chromatography(50-200 1344-28-1
Aluminum Oxide, Activated, 50-200 Micron, Neutral, for Column 1344-28-1
Aluminum Oxide, 99.9999%, Coarse Granular 1344-28-1
Aluminum Oxide, 99.999%, - 40 Mesh 1344-28-1
Aluminum Oxide, 99.99% 1344-28-1
Aluminum Oxide, 99% 1344-28-1
Aluminum Oxide (Morin Dyed) 1344-28-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net
Last modified: 06/01/2025 23:19:38