INTERNATIONAL PAINT -- INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXZNQ
MSDS NAME: INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
Responsible Party
Name: INTERNATIONAL PAINT
Address: 2270 MORRIS AVE
City: UNION NJ 07083-0386
Info Phone: 713-682-1711
Emergency Phone Number: 800-223-0154
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYES: SEVERE IRRITANT. MAY CAUSE VISION IMPAIRMENT
EVEN BLINDNESS. EYES: CORROSIVE. CAUSE IRREVERSIBLE EYE DAMAGE. SKIN:SEVERE
IRRITATION. MAY CAUSE BURNS. INHALATION: IRRITATION OF RESPIRATORY TRACT,
HEADACHE AND DIZZINESS AND UNCONSCIOUSNESS. INGESTION: GASTRO-INTESTINAL
IRRITATION, NAUSEA, (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: VOMITING, DIARRHEA. CHRONIC:
OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN
AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated By Exposure: SKIN AND RESPIRATORY CONDITIONS.
First Aid: EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST
15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:REMOVE CONTAMINATED
CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES BEFORE
REUSE. INHAL:REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESP IF NEEDED. GET MED
ATTN. INGEST:GET MED ATTN IMMED, DRINK PROMPTLY MILK, EGG WHITES, GELATIN
SOL'N OR WATER. AVOID ALCOHOL.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. AVOID INHALATION OF
VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT MATERIALS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: STORE IN BUILDING DESIGNED AND PROTECTED FOR
STORAGE OF LIQUIDS WITH NFPA CLASS GIVEN BY OSHA CLASS IN SECTION 4.
Other Precautions: AVOID BREATHING DUST OR CHIPS FROM SANDING OR BLASTING
SURFACES COATED WITH THIS PRODUCT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 98.0F,36.7C
Lower Limits: 1.4%
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N). SMOTHER FLAMES W/ONE OF EXTING MEDIA. WATER MAY BE USED TO COOL UNOPENED
CNTNRS BUT MUST NOT BE (SUPDAT)
Unusual Fire/Explosion Hazard: CNTNS FLAMM SOLV. DO NOT USE IN AREAS WHERE
SPARK/OPEN FLAME ARE PRESENT. ALSO EXPLOS MAY OCCUR IF CONTAMD W/STRONG
OXIDIZING AGENTS. CLSD CNTNRS MAY (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATNS. IN RESTRICTED VENT AREAS, USE NIOSH/MSHA
APPRVD RESP I/A/W/29 CFR 1910.134 TO
Ventilation: PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIM SPECIFIED REMOVE DECOMP
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment: ANSI APPRVD EMER EYE WASH & DELUGE SHOWER (FP N).
WEAR APPROPRIATE IMPERVIOUS PROT CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices: REMOVE AND WASH SOILED CLOTHING BEFORE REUSE, WASH
HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). FIRE FIGHT PROC:NOT BE USED AS EXTING MEDIA.
TAKE CARE TO PVNT SPREAD OF BURNING LIQ W/H*2O. CLSD CNTNRS MAY EXPLODE WHE N
EXPOSED TO EXTREME HEAT. EXPLO HAZ:MAY EXPODE WHEN EXPOSED TO EXTREME HEAT.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 244F,118C
Vapor Pres: SEE ING 1
Vapor Density: HVR/AIR
Spec Gravity: 0.899 (FP N)
Evaporation Rate & Reference: SLOWER THAN ETHER
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume: 44 WT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STORE AWAY FROM DIRECT HEAT, FLAME OR SPARKS.
Materials To Avoid: OXIDIZING AGENTS.
Hazardous Decomposition Products: CO, CO*2, VARIOUS HYDROCARBON FRAGMENTS,
NITROGEN COMPOUNDS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
Company: INTERNATIONAL PAINT INC
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-223-0154
Label Required IND: Y
Date Of Label Review: 06/19/1995
Status Code: C
Label Date: 06/19/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. CLASS IC. ACUTE: EYES: SEVERE IRRITANT. MAY
CAUSE VISION IMPAIRMENT EVEN BLINDNESS. CORROSIVE. CAUSES IRREVERSIBLE EYE
DAMAGE. SKIN: SEVERE IRRITATION. MAY CAUSE BURNS. INHALATION: IRRITATI ON OF
RESPIRATORY TRACT. HEADACHE AND DIZZINESS AND UNCONSCIOUSNESS. INGESTION:
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA. CHRONIC: CHRONIC
OVEREXPOSURE TO AND MISUSE OF SOLVENTS HAS BEE N LINKED TO PERMANENT BRAIN
AND NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
EPOXYLITE 6665 PART B
| |
|
ORIGINAL CONTACT CEMENT, 30503
| |
|
INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
| |
|
CHEMLOK AP-134
| 64-17-5
108-88-3
71-36-3
111-76-2
108-10-1 |
|
UNGAR SPOTMASK, H-1452
| 107-21-1 |
|
DURABOND D-3001 ACRYLIC COVE BASE ADHESIVE, 70048
| |
|
KWIKEE PENETRATING OIL, 19910
| 8052-41-3
71-36-3
8042-47-5
127-18-4
75-28-5
74-98-6
63089-85-0 |
|
ELECTRO 140 DEGREE CONTACT CLEANER, 00916
| 64475-85-0
56539-66-3
124-38-9 |
|
EASY-FLO 35
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
UNI-WELD SOLVENT CEMENTS PRIMERS & CLEANERS
| 109-99-9
78-93-3
67-64-1
108-94-1
81-48-1
4477-79-6 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-U
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, 7651182
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-Z
| 67-64-1
7732-18-5 |
|
INTERLUX SS WHITE, 244
| 1330-20-7
8032-32-4
64742-89-8
64742-88-7
112945-52-5 |
|
BJI-200 INK CARTRIDGE (BLACK) F47-0531-500
| |
|
NPG-6 TONER (BLACK) F41-8601
| |
|
70036, DURABOND D-9 EXTERIOR CARPET (SUPP DATA)
| |
|
NP-6000/7000/8000 SERRIES TONER CYAN, F41-6231
| |
|
BRAKE LUB/ANTI-SEIZE COMPOUND, 08945
| 7440-50-8
64742-57-0
7782-42-5
1302-78-9
9003-27-4
1314-13-2 |
|
FOMEGARD PLUS, 02225
| 9003-11-6 |
|
INTERLUX BRIGHTSIDE PRIMER WHITE, 4279
| 8032-32-4
64742-88-7 |
|
101WN WOOD NEUTRALIZER
| |
|
404 RIP-STRIP
| |
|
UI-5050 NEUTRAL PART B, 93505055
| |
|
SB1600 CLEAR
| |
|
PERMATEX WHITE LITHIUM GREASE, 195DA
| 110-54-3
64741-56-6
74-98-6
75-28-5 |
|
CI MITA 550 TONER
| |
|
AMERITONE PROFESSIONAL, 18388
| |
|
GASKET REMOVER AEROSOL, 50020
| 75-09-2
67-56-1
74-98-6
75-28-5 |
|
DISPOSABLE LENS CLEANING SOLUTION, 97841
| 67-63-0
1639-66-3 |
|
STW-1306-650
| |
|
VITA FLUX S
| |
|
EA 9352NS, A09098000
| |
|
62-4615-4930-5, CITRUS BASE INDUSTRIAL (SUP DAT)
| |
|
WOODEPOX A
| |
|
WOODEPOX B
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0491-400
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0541-500
| |
|
STL-1000-650
| |
|
STL-1000-651
| |
|
STL-1000-652
| |
|
STL-1000-653
| |
|
STL-1000-654
| |
|
STL-1000-655
| |
|
STL-1000-656
| |
|
STL-1000-657
| |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2AR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2BR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2F
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
|