DEXTER AEROSPACE -- EA 9352NS, A09098000
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BYBCW
MSDS NAME: EA 9352NS, A09098000
Responsible Party
Name: DEXTER AEROSPACE
Address: 2850 WILLOW PASS RD
City: PITTSBURG CA 94565-3299
Info Phone: 510-458-8000
Emergency Phone Number: 202-483-7616;800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address: 2850 WILLOW PASS ROAD
Box: 312
City: BAY POINT CA 94565-3299
Phone: 202-483-7616
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 2.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:BRIEF CONTACT MAY IRRITATE SKIN OR CAUSE A RASH.
CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION. ING 2 HAS EXHIBITED MUTAGENICITY IN BACTERIA.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SKIN RASH, IRRITATION.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. SKIN:WASH THOROUGHLY W/SOAP & WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. INHAL:REMOVE VICTIM TO FR ESH AIR. IF
SYMPTOMS PERSIST, GET MEDICAL ATTENTION. INGEST:DRINK PLENTY OF WATER. GET
MEDICAL ATTENTION IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. SCRAPE UP OR SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOC REGS (FP N).
THIS MATL, AS WASTE, IS NOT CONSIDERED RCRA HAZ WASTE. HOWEVER, INCIN IN
EPA-APPRVD WASTE INCIN IS PREF DISP PRACTICE. CHEM ADDNS,
PROCESSING/OTHERWISE ALTERING THIS MATL MAY MAKE WASTE (SUPP DATA)
Handling And Storage Precautions: REFRIGERATED STOR IS REC TO MAINTAIN PROD
QUALITY. THIS PROD SHOULD BE STORED AT 40F FOR UP TO 12 MONTHS.
Other Precautions: FOLLOW CURING SCHEDULE AS REC IN PROD LITERATURE. SEE ALSO
MSDS STABILITY & REACTIVY SECTION. DO NOT CUT, GRIND, WELD/DRILL ON/NEAR
THIS CNTNR. CONTAINS EPOXY RESINS - MAY CAUSE SKIN & EYE IRRITATION.
AVOID CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY, FOAM
OR FOG.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). CARTRIDGE RESPS DO NOT PROVIDE ADEQ PROT FOR FIRE FIGHTERS
OR EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASSES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). UNNECESSARY W/ADEQUATE EXHAUST VENTILATION.
Ventilation: LOCAL EXHAUST VENTILATION AT THE POINT OF USE.
Protective Gloves: BUTYL RUBBER, PVC/NITRILE RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: AN EYEWASH & SAFETY SHOWER SHOULD BE NEARBY & READY
FOR USE MEETING ANSI DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH AFTER HANDLING.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). CNDTNS(STAB):HRS AT 190F, ONE-HALF HR AT 240F
& 4 HRS AT 250F. FAILURE TO OBSERVE THESE PRECS MAY RSLT IN EXCESSIVE
HEAT BU ILD-UP CAUSING EXOTHERM. EXOTHERM HAS POTNTL FOR RELS OF TOX GASSES.
WASTE DISP METH:MANAGEMENT INFO HEREIN
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NIL
Vapor Density: >1
Spec Gravity: 1.4 (H*2O=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: BLACK, VISCOUS PASTE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: WARNING! HIGHLY EXOTHERMIC! DO NOT CURE IN MASSES
>10 GMS ULESS YOU PLAN TO USE IMMED. MATL HAS STEP CURE OF 2 (SUPDAT)
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CO, NO*X, ALDEHYDES, ACIDS & UNDETERMINED
ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EA 9352NS, A09098000
Company: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Street: 2850 WILLOW PASS ROAD
PO Box: 312
City: BAY POINT CA
Zipcode: 94565-3299
Health Emergency Phone: 202-483-7616;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 07/26/1995
Status Code: C
Label Date: 07/26/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: Slight
Hazard And Precautions: HIGHLY EXOTHERMIC. ACUTE:BRIEF CONTACT MAY IRRITATE
SKIN OR CAUSE A RASH. CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT
IN ALLERGIC SENSITIZATION. AN INGREDIENT IN PRODUCT HAS EXHIBITED MUTAGE
NICITY IN BACTERIA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
EPOXYLITE 6665 PART B
| |
|
ORIGINAL CONTACT CEMENT, 30503
| |
|
INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
| |
|
CHEMLOK AP-134
| 64-17-5
108-88-3
71-36-3
111-76-2
108-10-1 |
|
UNGAR SPOTMASK, H-1452
| 107-21-1 |
|
DURABOND D-3001 ACRYLIC COVE BASE ADHESIVE, 70048
| |
|
KWIKEE PENETRATING OIL, 19910
| 8052-41-3
71-36-3
8042-47-5
127-18-4
75-28-5
74-98-6
63089-85-0 |
|
ELECTRO 140 DEGREE CONTACT CLEANER, 00916
| 64475-85-0
56539-66-3
124-38-9 |
|
EASY-FLO 35
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
UNI-WELD SOLVENT CEMENTS PRIMERS & CLEANERS
| 109-99-9
78-93-3
67-64-1
108-94-1
81-48-1
4477-79-6 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-U
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, 7651182
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-Z
| 67-64-1
7732-18-5 |
|
INTERLUX SS WHITE, 244
| 1330-20-7
8032-32-4
64742-89-8
64742-88-7
112945-52-5 |
|
BJI-200 INK CARTRIDGE (BLACK) F47-0531-500
| |
|
NPG-6 TONER (BLACK) F41-8601
| |
|
70036, DURABOND D-9 EXTERIOR CARPET (SUPP DATA)
| |
|
NP-6000/7000/8000 SERRIES TONER CYAN, F41-6231
| |
|
BRAKE LUB/ANTI-SEIZE COMPOUND, 08945
| 7440-50-8
64742-57-0
7782-42-5
1302-78-9
9003-27-4
1314-13-2 |
|
FOMEGARD PLUS, 02225
| 9003-11-6 |
|
INTERLUX BRIGHTSIDE PRIMER WHITE, 4279
| 8032-32-4
64742-88-7 |
|
101WN WOOD NEUTRALIZER
| |
|
404 RIP-STRIP
| |
|
UI-5050 NEUTRAL PART B, 93505055
| |
|
SB1600 CLEAR
| |
|
PERMATEX WHITE LITHIUM GREASE, 195DA
| 110-54-3
64741-56-6
74-98-6
75-28-5 |
|
CI MITA 550 TONER
| |
|
AMERITONE PROFESSIONAL, 18388
| |
|
GASKET REMOVER AEROSOL, 50020
| 75-09-2
67-56-1
74-98-6
75-28-5 |
|
DISPOSABLE LENS CLEANING SOLUTION, 97841
| 67-63-0
1639-66-3 |
|
STW-1306-650
| |
|
VITA FLUX S
| |
|
EA 9352NS, A09098000
| |
|
62-4615-4930-5, CITRUS BASE INDUSTRIAL (SUP DAT)
| |
|
WOODEPOX A
| |
|
WOODEPOX B
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0491-400
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0541-500
| |
|
STL-1000-650
| |
|
STL-1000-651
| |
|
STL-1000-652
| |
|
STL-1000-653
| |
|
STL-1000-654
| |
|
STL-1000-655
| |
|
STL-1000-656
| |
|
STL-1000-657
| |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2AR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2BR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2F
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
|