DIEDRICH TECHNOLOGIES INC -- 404 RIP-STRIP
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXZWY
MSDS NAME: 404 RIP-STRIP
Responsible Party
Name: DIEDRICH TECHNOLOGIES INC
Address: 7373 S 6TH ST
City: OAK CREEK WI 53154
Info Phone: 414-764-0058
Emergency Phone Number: 414-764-0058
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DIEDRICH TECHNOLOGIES
Address: 7373 S 6TH ST
City: OAK CREEK WI 53154
Phone: 414-764-0058
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CORR TO EXPOS TISS, BURNS & DEEP ULCERATIONS CAN
FREQUENTLY RESULT. EYE CONT:CAUSE SEV BURNS; EVEN SMALL QUANTITIES CAN RESULT
IN PERM DMG &/OR BLINDNESS. SKIN CONT:CORR ACTION CAUSES BURNS &
FREQUENT DEEP ULCERATION W/SUBSEQUENT SCARRING.PROLONGED CONT DESTROYS TISS.
MIST FROM SOLNS CAN CAUSE IRRIT (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:DERM. INGEST:CAN CAUSE VERY
SERIOUS DMG TO MOUTH, ESOPHAGUS, STOM & OTHER TISS W/CONT IS MADE &
CAN BE FATAL. INHAL:INHAL OF MISTS CAN CAUSE DMG TO UPPER RESP TRACT &
LUNG TISS DEPENDING ON E XTENT OF EXPOS. EFTS CAN RANGE FROM MILD IRRIT OF
MUC MEMBS, SEV PNEUM & DESTRUCT OF LUNG TISSUE.
Medical Cond Aggravated By Exposure: NO APPLICABLE INFORMATION TO BE FOUND.
First Aid: EYE:IMMED FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS. HOLD EYELIDS
OPEN DURING THIS FLUSHING. FOR MAX EFTIVENESS WASHING MUST START W/IN 1 MIN.
SEEK IMMED MED ASSISTANCE. SKIN:FLUSH W/WATER FOR AT LST 15 MINS. SLIPPERY
FEELING INDICATES CAUSTIC MAY STILL BE PRESENT & CAUSE RASH/BURN. FOLLOW
IMMED W/RINSE OF VINEGAR/DILUTED ACETIC ACID. APPLY ANTIBIOTIC CREAM TO PVNT
INFECTION. CONTAM CLTHG(SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: DIKE AREA TO CONTAIN SPILL. SWEEP/SHOVEL SPILLAGE
& RETURN TO CNTNR, REUSE SPILLED MATL IF POSS. NEUT REMAINING RESIDUE
& FLUSH AREA W/WATER UNTIL SLIPPERINESS IS GONE. SOAK UP WATER W/SWEEPING
CMPD/A BSORB MATL & PLACE IN SEALABLE CNTNR/USE
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: NEUTRALIZE ALKALINITY & SEPARATE FLOATABLE GREASES
& OILS FOR INCIN/DISP AT APPROP DISP SITE. DISCHARGE NEUTRALIZED WATER
I/A/W FEDERAL, STATE & LOCAL REGS. DISPOSE OF IN A SUITABLE CHEMICAL
WASTE DIS POSAL SITE.
Handling And Storage Precautions: FREEZES AT ABOUT 32F. AVOID OPEN CONTAINERS.
DO NOT STORE IN HOT AREAS. ADD CAUTIOUSLY TO COOL WATER W/AGITATION, HEAT IS
EVOLVED.
Other Precautions: TREAT EMPTY CONTAINERS AS IF THEY WERE FULL. DO NOT STORE IN
OR PIPE THROUGH ANY OF THE MATERIALS LISTED IN REACTIVITY SECTION, USE ONLY
APPROVED PLASTIC.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NONE
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). COOL W/WATER EXPOSED CONTAINERS, SURROUNDING EQUIPMENT
& STRUCTURES EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard: CONT W/ALUMINUM, MAGNESIUM, COPPER, ZINC, TIN,
BRASS & BRONZE CAN CAUSE RXN GENERATING HYDROGEN GAS WHICH IS FLAMM
&/OR EXPLOSIVE IF IGNITED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED DUST/MIST FILTER RESPIRATOR FOR
ROUTINE WORK PURPOSES WHEN EXPOSURE TO MISTS EXCEED PELS. THE RESPIRATOR USE
LIMITATIONS MADE BY NIOSH/MSHA OR THE MFR MUST BE OBSERVED.
Ventilation: LOCAL EXHAUST SUFFICIENT TO MINIMIZE EXPOSURE TO MIST BELOW PELS.
Protective Gloves: RUBBER, PVC OR NEOPRENE GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment: PROT ALL BODY PARTS FROM CONT BY USING FULL CHEM
RESIST SUIT W/TIGHT FITTING CUFFS & COLLAR, RUBBER BOOTS. APPLY
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). MATLS TO AVOID:OF THESE METALS. AVOID CONT
W/LEATHER, WOOL, OXIDIZING AGENTS & NITRITES. FIRST AID PROC:MUST BE
LAUNDERED B EFORE REUSE & SHOES SHOULD BE DISCARDED. INGEST:IF CONSCIOUS,
DRINK LG QTYS OF WATER/ACIDIC BEVERAGES (TOMATO,
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 240F,116C
Vapor Pres: 20-25
Vapor Density: 1
Spec Gravity: 1.33 (H*2O=1)
Evaporation Rate & Reference: 0.925 (BUTYL ACETATE=1)
Solubility in Water: COMPLETE
Appearance and Odor: THICK VISCOUS YELLOWISH PASTE; SLIGHT AMMONIA ODOR.
Percent Volatiles by Volume: 51.16
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: CONTACT W/ACIDS, ALUMINUM, ZINC, TIN, COPPER &
ALLOYS OF THESE METALS.
Materials To Avoid: MIXING W/ACIDS, AMMONIUM CNTNG SOLNS & ANY ACTIVE METAL
SUCH AS ZINC, ALUMINUM, COPPER, BRASS, BRONZE & ALLOYS (SUPDAT)
Hazardous Decomposition Products: MAY PRODUCE EXPLOSIVE HYDROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 404 RIP-STRIP
Company: DIEDRICH TECHNOLOGIES
Street: 7373 S 6TH ST
City: OAK CREEK WI
Zipcode: 53154
Health Emergency Phone: 414-764-0058
Label Required IND: Y
Date Of Label Review: 07/20/1995
Status Code: C
Label Date: 07/20/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: CORROSIVE TO EXPOSED TISSUE, BURNS & DEEP
ULCERATIONS CAN FREQUENTLY RESULT. EYE CONTACT:CAUSE SEVERE BURNS; EVEN SMALL
QUANTITIES CAN RESULT IN PERMANENT DAMAGE &/OR BLINDNESS. SKIN
CONTACT:CORROSIVE ACTION CAUSES BURNS & FREQUENT DEEP ULCERATION
W/SUBSEQUENT SCARRING. PROLONGED CONTACT DESTROYS TISSUE. MIST FROM SOLUTIONS
CAN CAUSE IRRITANT DERMATITIS. INGEST:CAN CAUSE SERIOUS DAMAGE TO MOUTH, E
SOPHAGUS, STOMACH & ANY OTHER TISSUE CONTACTED. INHAL:MISTS CAN CAUSE
DAMAGE TOUPPER RESPIRATORY TRACT & LUNG TISSUE. CHRONIC:NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
EPOXYLITE 6665 PART B
| |
|
ORIGINAL CONTACT CEMENT, 30503
| |
|
INTERTUF HYDROCARBON EPOXY REACTOR, KHA062
| |
|
CHEMLOK AP-134
| 64-17-5
108-88-3
71-36-3
111-76-2
108-10-1 |
|
UNGAR SPOTMASK, H-1452
| 107-21-1 |
|
DURABOND D-3001 ACRYLIC COVE BASE ADHESIVE, 70048
| |
|
KWIKEE PENETRATING OIL, 19910
| 8052-41-3
71-36-3
8042-47-5
127-18-4
75-28-5
74-98-6
63089-85-0 |
|
ELECTRO 140 DEGREE CONTACT CLEANER, 00916
| 64475-85-0
56539-66-3
124-38-9 |
|
EASY-FLO 35
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
UNI-WELD SOLVENT CEMENTS PRIMERS & CLEANERS
| 109-99-9
78-93-3
67-64-1
108-94-1
81-48-1
4477-79-6 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-U
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, 7651182
| 67-64-1
7732-18-5 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-1-Z
| 67-64-1
7732-18-5 |
|
INTERLUX SS WHITE, 244
| 1330-20-7
8032-32-4
64742-89-8
64742-88-7
112945-52-5 |
|
BJI-200 INK CARTRIDGE (BLACK) F47-0531-500
| |
|
NPG-6 TONER (BLACK) F41-8601
| |
|
70036, DURABOND D-9 EXTERIOR CARPET (SUPP DATA)
| |
|
NP-6000/7000/8000 SERRIES TONER CYAN, F41-6231
| |
|
BRAKE LUB/ANTI-SEIZE COMPOUND, 08945
| 7440-50-8
64742-57-0
7782-42-5
1302-78-9
9003-27-4
1314-13-2 |
|
FOMEGARD PLUS, 02225
| 9003-11-6 |
|
INTERLUX BRIGHTSIDE PRIMER WHITE, 4279
| 8032-32-4
64742-88-7 |
|
101WN WOOD NEUTRALIZER
| |
|
404 RIP-STRIP
| |
|
UI-5050 NEUTRAL PART B, 93505055
| |
|
SB1600 CLEAR
| |
|
PERMATEX WHITE LITHIUM GREASE, 195DA
| 110-54-3
64741-56-6
74-98-6
75-28-5 |
|
CI MITA 550 TONER
| |
|
AMERITONE PROFESSIONAL, 18388
| |
|
GASKET REMOVER AEROSOL, 50020
| 75-09-2
67-56-1
74-98-6
75-28-5 |
|
DISPOSABLE LENS CLEANING SOLUTION, 97841
| 67-63-0
1639-66-3 |
|
STW-1306-650
| |
|
VITA FLUX S
| |
|
EA 9352NS, A09098000
| |
|
62-4615-4930-5, CITRUS BASE INDUSTRIAL (SUP DAT)
| |
|
WOODEPOX A
| |
|
WOODEPOX B
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0491-400
| |
|
BJI-201 INK CARTRIDGE CYAN F47-0541-500
| |
|
STL-1000-650
| |
|
STL-1000-651
| |
|
STL-1000-652
| |
|
STL-1000-653
| |
|
STL-1000-654
| |
|
STL-1000-655
| |
|
STL-1000-656
| |
|
STL-1000-657
| |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2AR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2BR
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A GASKET NO 2 SEALANT, 2F
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
|