LUBRICATION ENGINEERS INC -- 3751 ALMAGARD VARI-PURPOSE LUBRICANT
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BZRDZ
MSDS NAME: 3751 ALMAGARD VARI-PURPOSE LUBRICANT
Responsible Party
Name: LUBRICATION ENGINEERS INC
Box: 7128
City: FORT WORTH TX 76111
Info Phone: 817-834-6321
Emergency Phone Number: 817-834-6321
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LUBRICATION ENGINEERS INC
Address: 3851 AIRPORT FREEWAY
Box: 7128
City: FORT WORTH TX 76111
Phone: 817-834-6321
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENTS
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:ALTHOUGH THERE ARE NO CONSISTENT PRIMARY ROUTES OF
ENTRY, THE PRODUCT MAY CAUSE MILD DERMITITIS UPON PROLONGED CONTACT AND IS
EXPECTED TO BE EYE AND LUNG IRRITANT.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: ANY EXISTING SKIN, EYE, OR LUNG IRRITATION
MAY BE AGGRAVATED BY DIRECT CONTACT.
First Aid: EYE:FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES UNTIL
IRRITATION SUBSIDES. SKIN:WASH AFFECTED SKIN AREA WITH MILD SOAP AND WATER.
INGEST:DO NOT INDUCE VOMITING. CONTACT PHYSICIAN. INHAL:REMOV E TO FRESH AIR.
IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. CONTACT PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. TREAT AS A PETROLEUM
OIL SPILL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE WHERE PERMITTED UNDER FEDERAL, STATE, AND
LOCAL LAWS. USED PETROLEUM PRODUCTS MAY BE RECYCLED THROUGH RE-REFINING
PROCESSES.
Handling And Storage Precautions: CLOSE CONTAINERS WHEN NOT IN USE. KEEP AWAY
FROM HEAT, SPARKS, OPEN FLAMES, AND STRONG OXIDANTS. AVOID EYE CONT &
PRLNGD SKIN CONTACT.
Other Precautions: AVOID BREATHING OIL MISTS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: 430F,221C
Extinguishing Media: FOAM, DRY CHEMICAL, WATER FOG, OR CARBON DIOXIDE.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). DO NOT DIRECT SOLID STREAM OF WATER INTO FIRE. TREAT AS
PETROLEUM OIL FIRE.
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USUALLY NOT NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN (FP N).
Ventilation: USUALLY NOT NEEDED IN OPEN, UNCONFINED AREAS.
Protective Gloves: NEOPRENE/PLASTIC GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EMERGENCY EYE WASH & DELUGE SHOWER (FP
N).
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDITIONAL INFORMATION (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >500F,>260C
M.P/F.P Text: 500F,260C
Vapor Pres: <5 @ 60F
Vapor Density: >1
Spec Gravity: 0.95 (H*2O=1)
PH: 7-9
Evaporation Rate & Reference: NOT KNOWN
Solubility in Water: NEGLIGIBLE
Appearance and Odor: RED LUBRICANT, LUBE OIL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: CONTACT WITH NUCLEAR RADIATION AND STRONG
OXIDIZING MATERIALS.
Materials To Avoid: STRONG OXIDIZING MATERIALS.
Hazardous Decomposition Products: DENSE SMOKE; OXIDES OF C,S,ZN,N AND SB; CA
COMPOUNDS, HYDROGEN SULFIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 3751 ALMAGARD VARI-PURPOSE LUBRICANT
Company: LUBRICATION ENGINEERS INC
Street: 3851 AIRPORT FREEWAY
PO Box: 7128
City: FORT WORTH TX
Zipcode: 76111
Health Emergency Phone: 817-834-6321
Label Required IND: Y
Date Of Label Review: 03/14/1996
Status Code: C
Label Date: 03/14/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:ALTHOUGH THERE ARE NO CONSISTENT
PRIMARY ROUTES OF ENTRY, THE PRODUCT MAY CAUSE MILD DERMATITIS UPON PROLONGED
CONTACT AND IS EXPECTED TO BE EYE AND LUNG IRRITANT. CHRONIC:NONE SPEC IFIED
BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.