LA-CO INDUSTRIES INC -- SOLDER BRITE 95/5
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBLMX
MSDS NAME: SOLDER BRITE 95/5
Responsible Party
Name: LA-CO INDUSTRIES INC
Address: 250 N WASHTENAW AVE
City: CHICAGO IL 60612
Info Phone: 312-826-1700
Emergency Phone Number: 312-826-1700
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LA-CO INDUSTRIES, INC./MARKAL CO.
Address: 1201 PRATT BLVD.
City: ELK GROVE VILLAGE IL 60007-5746
Phone: 847-956-7600
=======================================================
Ingredients
=======================================================
Cas: 7440-36-0
RTECS #: CC4025000
Name: ANTIMONY (SARA 313) (CERCLA)
% Wt: 1
OSHA PEL: 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3 (SB)
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 7440-31-5
RTECS #: XP7320000
Name: TIN
OSHA PEL: 2 MG/M3
ACGIH TLV: 2 MG/M3
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ANTIMONY: IRRITATING TO SKIN AND MUCOUS MEMBRANES.
PROLONGED EXCESSIVE ABSORPTION IS CHARACTERIZED BY ABDOMINAL PAIN. METALLIC
TASTE. VOMITING. LOSS OF APPETITE. WEIGHT LOSS AND DIARRHEA. ABSORPTION O F
ANTIMONY MUST BE VERIFIED BY MEDICAL EXAMINATION. TIN: INHALATION OF TIN
OXIDE (TLV=10 MG/M3) MAY (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: LEAD TO BENIGN PNEUMOCONIOSIS.
CERTAIN TIN SALTS ARE IRRITANTS TO THE SKIN AND MUCOUS MEMBRANES.
First Aid: SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH THOROUGHLY WITH WATER
FOR AT LEAST 15 MINUTES. INHALATION: REMOVE TO FRESH AIR IF EFFECTS OCCUR.
CONSULT MD. INGESTION: ADMINISTER WATER AND INDUCE VOMITING IF CONSCIOUS.
CONSULT MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SCOOP UP EXCESS. REMOVE REMAINDER WITH WET MOP.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Handling And Storage Precautions: AVOID BREATHING FUMES WHEN SOLDERING. DO NOT
STORE ABOVE 100F.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER FOG, ALCOHOL FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF TLV'S EXCEEDED - USE A NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation: LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL): YES.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: WASH THOROUGHLY AFTER USE AND BEFORE EATING OR
SMOKING.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Solubility in Water: SOLUBLE
Appearance and Odor: GREY PASTE; SLIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: OXIDIZERS, ACIDS, CHLORINE, TURPENTINE.
Hazardous Decomposition Products: ANTIMONY: HIGHLY TOXIC STIBINE GAS (TLV =
0.10 PPM).
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SOLDER BRITE 95/5
Company: LA-CO INDUSTRIES, INC./MARKAL CO.
Street: 1201 PRATT BLVD.
City: ELK GROVE VILLAGE IL
Zipcode: 60007-5746
Health Emergency Phone: 312-826-1700
Label Required IND: Y
Date Of Label Review: 05/09/1996
Status Code: C
Label Date: 05/09/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: DECOMPOSITION PRODUCTS MAY BE TOXIC. ACUTE: ANTIMONY IS
IRRITATING TO SKIN AND MUCOUS MEMBRANES. PROLONGED EXCESSIVE ABSORPTION IS
CHARACTERIZED BY ABDOMINAL PAIN, METALLIC TASTE, VOMITING, LOSS OF AP PETITE,
WEIGHT LOSS AND DIARRHEA. TIN: INHALATION OF TIN OXIDE MAY LEAD TO BENIGN
PNEUMOCONIOSIS. CERTAIN TIN SALTS ARE IRRITANTS TO SKIN AND MUCOUS MEMBRANES.
CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.