CAAP INC -- MMS 419, CAAPCOAT FE-AS OR FLUOROELASTOMER (S
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBMBR
MSDS NAME: MMS 419, CAAPCOAT FE-AS OR FLUOROELASTOMER (SUPDAT)
Kit Part: Y
Responsible Party
Name: CAAP CO INC
Address: 152 PEPE'S FARM RD
City: MILFORD CT 06460
Info Phone: 203-877-0375
Emergency Phone Number: 800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CAAP CO INC
Address: 152 PEPE'S FARM RD
City: MILFORD CT 06460
Phone: 203-877-0375
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:CONTACT MAY DAMAGE EYES,IRRITATE SKIN AND CAUSE
RESPIRATORY IRRITATION UPON INHALATION. SYMPS:VAPOR EXPOSURE:BURNING EYES,
HEADACHE, DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, NAUSEA. CONTA
CT:CORROSIVE ACCORDING TO DOT CORROSIVITY TEST. MAY CAUSE IRRITATION OF SKIN,
BURNING OF SKIN OR EYES.(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:CHRONIC:RPTD/PRLNGD EXPOS MAY
CAUSE DEFAT OF SKIN & DERM AND POSSIBLE SENSITIZATION. INHALATION OF HIGH
CONCENTRATIONS ABOVE PEL'S MAY CAUSE NEURAL IMPAIRMENT OR LIVER EFFECT.
Medical Cond Aggravated By Exposure: PREEXISTING ALLERGIES, EYE, SKIN AND
RESPIRATORY DISORDERS.
First Aid: EYES:FLUSH WITH LUKE WARM WATER FOR AT LEAST 15 MINUTES, CALL
DOCTOR. SKIN:WASH WELL WITH SOAP AND WATER, REMOVE CONTAMINATED CLOTHING. IF
IRRITATION PERSISTS, CALL DOCTOR. INHALATION:REMOVE TO FRESH AIR. GIVE
ARTIFICIAL RESPIRATION IF NOTBREATHING. IF BREATHING IS DIFFICULT GIVE
OXYGEN. CALL A DOCTOR. INGESTION:CALL DOCTOR. DO NOT INDUCE VOMITING.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL IGNIT SOURCES & DO NOT SMK IN AREA.
WEAR PROT EQUIP INCLUDING SOLV RESIST GLOVES, APRON, BOOTS, & NIOSH/MSHA
APPRVD SBCA IN PRESS DEMAND MODE/POS PRESS AIR-SUPP RESP. CNTN SPILL W/ABSORB
MA TL. CLEAN UP ABSORB & CNTN SECURELY. SWEEP(SUPDAT)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATION IN APPROPRIATELY DESIGNED AND LICENSED
INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS IGNITABLE WASTE.
REGULATIONS MAY VARY FROM STATE TO STATE; DISPOSE OF ACCORDING TO STATE,
LOCAL A ND FEDERAL REGULATIONS.
Handling And Storage Precautions: DO NOT WEAR CONTACT LENSES WHEN USING THIS
PRODUCT AS CONTACT LENSES CONTRIBUTE TO THE SEVERITY OF AN EYE INJURY.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TOC
Flash Point Text: 74.0F,23.3C
Lower Limits: 1.2%
Upper Limits: 8.0%
Extinguishing Media: CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). KEEP PERSONNEL UPWIND OF THE FIRE.
Unusual Fire/Explosion Hazard: NONE, THE PRODUCT IS A FLAMMABLE LIQUID. THE
PRODUCT BECOMES A CORROSIVE LIQUID UPON THE ADDITION OF WATER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF USE CNDTNS GENERATE VAPS/MISTS WEAR NIOSH/MSHA
APPRVD RESP APPROP FOR THOSE EMISSION LEVELS AT POINT OF USE. APPROP
NIOSH/MSHA APPRVD RESPS INCLUDE FULL FACEPIECE/PURIFYING CARTRIDGE RESP
EQUIPPED FOR ORG VAPS & MISTS, SCBA IN (SUPDAT)
Ventilation: PROD IS NOT USED ALONE; IT IS USED IN CONJUNCTION W/CAAPCOAT
FLUOROELASTOMER COATINGS. SPRAY BOOTH IS REQD FOR
Protective Gloves: SOLVENT RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER
(FP N). SOLVENT RESISTANT APRON SHOULD BE WORN.
Work Hygienic Practices: WASH WELL WITH SOAP AND WATER AFTER HANDLING THE
PRODUCT.
Supplemental Safety and Health: USERS OF "L" VERSION CONSULT "LR" VERSION FOR
ADDNL INFO (FP N). MFR TRADE/PART #:CURING AGENT. SPILL PROC:& WET MOP
AFFECTED AREA W/SOAP & WATER. VENT AREA AS WELL AS POSS. RESP PROT:PRESS
DEMAND MOD E/POS PRESS AIR-SUPPLIED RESP. EYE PROT:AND FULL LENGTH FACESHIELD
(FP N).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F6
B.P. Text: 241F,116C
Vapor Pres: 15
Vapor Density: 3.5
Spec Gravity: 0.83 (H*2O=1)
Evaporation Rate & Reference: 1.6 (BUAC=1)
Solubility in Water: SLIGHT
Appearance and Odor: CLEAR YELLOW LIQUID WITH PUNGENT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: KEEP AWAY FROM ALL IGNIT SOURCES, HOT SURFS, &
TEMPS >100F (38C). DO NOT SMK IN IMMED AREA WHERE PROD IS BEING USED.
Materials To Avoid: PRODUCT IS INCOMPATIBLE WITH STRONG OXIDIZING AGENTS AND
STRONG ACIDS.
Hazardous Decomposition Products: NITROGEN, CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN & AMMONIA MAY BE RELEASED DURING COMBUSTION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MMS 419, CAAPCOAT FE-AS OR FLUOROELASTOMER (SUPDAT)
Company: CAAP CO INC
Street: 152 PEPE'S FARM RD
City: MILFORD CT
Zipcode: 06460
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/05/1996
Status Code: C
Label Date: 04/05/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. AVOID EYE CONTACT. ACUTE:CONTACT MAY DAMAGE
EYES,IRRITATE SKIN AND CAUSE RESPIRATORY IRRITATION UPON INHALATION.
SYMPTOMS:VAPOR EXPOSURE:BURNING EYES, HEADACHE, DIZZINESS, THROAT IRRITATION
, LOSS OF APPETITE, NAUSEA. CONTACT:CORROSIVE ACCORDING TO DOT CORROSIVITY
TEST. MAY CAUSE IRRITATION OF SKIN, BURNING OF SKIN OR EYES. CHRONIC:REPEATED
OR PROLONGED EXPOSURE MAY CAUSE DEFATTING OF TH E SKIN, DERMATITIS AND
POSSIBLE SENSITIZATION. INHALATION OF HIGH CONCENTRATIONS ABOVE PEL'S MAY
CAUSE NEURAL IMPAIRMENT OR LIVER EFFECT.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
229B9500, DEVRAN 229 ACRYLIC EPOXY GLOSS (SUP DAT)
| 29354-73-2
25068-38-6
88230-35-7
123-86-4
71-36-3
108-65-6
13463-67-7
1330-20-7 |
|
C/S INK REMOVER, 5928
| |
|
K 1586 AM
| |
|
SOLDER BRITE 95/5
| 7440-36-0
7440-31-5 |
|
DEVFLEX 604 WATER BASED HIGH GLOSS ENAMEL, 604S3501
| 111-76-2
112-34-5
64742-88-7
13463-67-7
7732-18-5 |
|
ACCELERATOR BLEND, S50X56
| |
|
WISK POWER PLUS LIQUID LAUNDRY DETERGENT
| |
|
ACTREL ED 22
| |
|
AQUADEX 36231 GRAY, 9002W104
| 872-50-4
25265-77-4
111-76-2
84-74-2 |
|
ZEPRESERVE 111,0315
| |
|
CRYSTAL 1 HIGH GLOSS VARNISH
| 8052-41-3
111-15-9
71-23-8
138-86-3 |
|
SPECGROUT HS - PART B
| |
|
RUSTLIK WS-5050, 74016-1 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74056-5 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74306-30 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74556-55 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, RL700-1 TOTE
| 10213-77-1
102-71-6 |
|
DPD 3, P-6743
| 7681-11-0
7732-18-5 |
|
ROAD RUNNER, 0318
| |
|
TURBINE OIL GST ISO 46, CPS253027
| |
|
ACETREL ED 22
| |
|
CORTEC 422
| |
|
CORTEC 423
| |
|
UNITY SEWING MACHINE OIL, 20122U
| |
|
CATION RESIN, 2432
| 63182-08-1
7732-18-5 |
|
MMS 419, CAAPCOAT FP-80 FILLED (SUPP DATA)
| |
|
MMS 419, CAAPCOAT FE-AS OR FLUOROELASTOMER (SUPDAT)
| |
|
NICKEL PLATED NONWOVEN MAT, 8000823
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000842
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000843
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000844
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000855
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000877
| 7440-02-0 |
|
PETROLEUM HYDROCARBON PLUS ADDITIVE, 11311
| |
|
DELTA HIGH TEMP-MASTER INSULATING CEMENT
| |
|
ISM-450, PESTICIDE DEGRADATION SOLUTION (SUPDAT)
| 540-81-1
72-20-8
50-29-3 |
|
IONPHOR CATION CU ELECTROLYTE BUFFER, 044137
| 7732-18-5
7758-99-8
64-18-6
17455-13-9 |
|
IONPHOR ANION PMA ELECTROLYTE BUFFER, 044138
| 7732-18-5
89-05-4
1310-73-2
60-26-4
102-71-6 |
|
DIAMOND GLAZE PART A-WHITE, 14-00/150
| 151-56-4
67-63-0
111-76-2 |
|
SYNTHETIC WATER COMPOUND
| |
|
733 GLASS & METAL SEALANT, CLEAR
| 4253-34-3
112945-52-5
17689-77-9
70131-67-8 |
|
GS-2/E
| |
|
GS-3/E
| |
|
GS-101/E
| |
|
AR-GLO 4-P
| |
|
AR-GLO 101
| |
|
GAX-16, 02275
| |
|
N450-1 THINNER/CLEANER
| 1330-20-7 |
|
FIRST DEFENSE PRACTICE-INSERT
| 67-17-5
7732-18-5
57-55-6 |
|
CARPET TILE ADHESIVE
| |
|
|