CORTEC CORP -- CORTEC 422
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBLYC
MSDS NAME: CORTEC 422
Responsible Party
Name: CORTEC CORP
Address: 4119 WHITE BEAR PARKWAY
City: ST PAUL MN 55110
Info Phone: 612-429-1122
Emergency Phone Number: 800-426-7832;800-424-9300(CHEMTREC)
Preparer's Name: CHRISTOPHE CHANDLER
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: THE CORTEC CORPORATION
Address: 4119 WHITE BEAR PKY
City: SAINT PAUL MN 55110-7634
Phone: 651-429-1100/800-4-CORTEC
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: SKIN:REPEATED OR PROLONGED CONTACT WITH THIS MATERIAL MAY
CAUSE IRRITATION DUE TO THE ACIDIC NATURE OF THIS PRODUCT. EYE:CONTACT WITH
THIS MATERIAL WILL CAUSE IRRITATION. INHALATION:INHAL OF PRODUCT V APORS IS
NOT CONSIDERED A HEALTH HAZARDDUE TO THE LOW VAPOR PRESSURE OF THE ACTIVE
COMPOUNDS. IF (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:PARTICLE MISTS ARE GENERATED AS
A RESULT OF SPRAYING OR ATOMIZING THIS MATERIAL, INHALATION OF THESE MISTS
WILL BE IRRITATING TO THE RESPIRATORY TRACT. INGESTION:INGEST OF THIS
MATERIAL MAY CAUSE GASTROINTESTINAL IRRITATION DUE TO THE ACIDITY OF
MATERIAL. MATL IS BELIEVED TO HAVE LOW ORDER OF ACUTE ORAL TOX.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: EYES:IMMEDIATELY FUSH EYES WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES. GET PROMPT MEDICAL ATTENTION. SKIN:WASH AFFECTED AREA WITH
SOAP AND WATER. IF IRRITATION PERSISTS, CONSULT A PHYSICIA N.
INHALATION:REMOVE PERSON TO AN UNCONTAM AREA, ADMIN OXYG IF NEC. IF BRTHG HAS
STOPPED, START CPR. GET IMMED MED ATTN. INGEST:DO NOT INDUCE VOMITING, GET
IMMEDIATE MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ABSORB ON SWEEPING COMPOUND OR OTHER ABSORBENT
MATERIAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE OR DISPOSE OF IN ACCORDANCE WITH EXISTING
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: AVOID EYE CONTACT AND REPEATED OR PROLONGED
SKIN CONTACT.
Other Precautions: AVOID FREEZING AND KEEP CONTAINERS CLOSED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NOT ESTABLISHED
Extinguishing Media: WATER, CARBON DIOXIDE OR OTHER DRY CHEMICAL FIREFIGHTING
AGENTS.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NOT GENERALLY REQUIRED. IF MISTS ARE PRODUCED, WEAR A
NIOSH/MSHA APPROVED DUST/MIST RESPIRATOR.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: CHEMICAL RESIST RUB OR PLASTIC GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER
(FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: VP:SAME AS WATER. PH:1.5-2.5 (NEAT).
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: SUPP DATA
Spec Gravity: 1.1-1.2 (25C)
PH: SUPDAT
Evaporation Rate & Reference: SAME AS WATER
Appearance and Odor: AMBER LIQUID/TAN GEL WITH A SLIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID CONTACT WITH INCOMPATIBLE MATERIALS.
Materials To Avoid: AVOID CONTACT WITH STRONG OXIDANTS AND CAUSTIC MATERIALS.
Hazardous Decomposition Products: (UNDER FIRE CONDITIONS):OXIDES OF CARBON.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CORTEC 422
Company: THE CORTEC CORPORATION
Street: 4119 WHITE BEAR PKY
City: SAINT PAUL MN
Zipcode: 55110-7634
Health Emergency Phone: 800-426-7832;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/02/1996
Status Code: C
Label Date: 04/02/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:SKIN:REPEATED OR PROLONGED CONTACT MAY CAUSE
IRRITATION DUE TO THE ACIDIC NATURE OF THIS PRODUCT. EYE:CONTACT WILL CAUSE
IRRITATION. INHALATION:IF PARTICLE MISTS ARE GENERATED AS A RESULT OF SPR
AYING OR ATOMIZING THIS MATERIAL, INHALATION OF THESE MISTS WILL BE
IRRITATING TO THE RESPIRATORY TRACT. INGESTION:MAY CAUSE GASTROINTESTINAL
IRRITATION DUE TO THE ACIDITY OF THE MATERIAL. THIS MATERI AL IS BELIEVED TO
HAVE A LOW ORDER OF ACUTE ORAL TOXICITY. CHRONIC:NONE SPECIFIED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.