SMITH SEWING MACHINES -- UNITY SEWING MACHINE OIL, 20122U
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBLZD
MSDS NAME: UNITY SEWING MACHINE OIL, 20122U
Responsible Party
Name: SMITH SEWING MACHINES
Address: 3551 EL CAJON BLVD SUITE B
City: SAN DIEGO CA 92104
Info Phone: 619-233-3030
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: SMITH SEWING MACHINES
Address: 3551 EL CAJON BLVD SUITE B
City: SAN DIEGO CA 92104
Phone: 619-233-3030
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: HLTH STUDIES HAVE SHOWN MANY PETRO HYDROCARBONS &
SYNTHETIC LUBRICANTS POSE POTNTL HUMAN HLTH RISKS WHICH MAY VARY FROM PERSON
TO PERSON. AS A PRECAUTION, EXPOS TO LIQS, VAPS, MISTS OR FUMES SHOULD BE
MINIMIZED. SKIN: SLIGHTLY IRRIT TO SKIN. PRLNGD/RPTD CNTCT MAY LEAD TO
VARIOUS SKIN DISORDERS SUCH AS (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: SEE "LR" VERSION, ING 17, FOR ADDITIONAL INFO
(FP N).
Signs And Symptions Of Overexposure: HLTH HAZ: DERM, OIL ACNE OR FOLLICULITIS.
BASED ON DATA FROM COMPONENTS OR SIMILAR PRODS. EYE: MAY CAUSE SLIGHT IRRIT.
MAY CAUSE STINGING, TEARING & REDNESS. INGEST: PROD HAS LOW DEGREE OF
ACUTE ORAL, BUT MINUTE AMTS ASPIR INTO LUNGS DURING INGEST/VOMIT MAY CAUSE
MILD TO SEV PULM INJURY & POSS DEATH. INGEST:
Medical Cond Aggravated By Exposure: PRE-EXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
First Aid: EYES: FLUSH W/LG AMTS OF WATER FOR AT LEAST 15 MIN. GET MED ATTN IF
IRRIT PERSISTS/DEVELOPS. SKIN: REMOVE ANY CONTAMD CLTHG & WASH SKIN
W/SOAP & WATER. LAUNDER/DRY-CLEAN CLTHG BEFORE REUSE. GET MED AT TN IF
IRRIT PERSISTS/DEVELOPS. INHAL: REMOVE TO FRESH AIR & PROVIDE OXYGEN IF
BRTHG IS DFCLT. GET MED ATTN. INGEST: DO NOT INDUCE VOMIT. IN GEN, NO
TREATMENT IS NEC UNLESS LG QTYS OF PROD
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNIT. RECOVER FREE PROD. ADD
SAND, EARTH OR OTHER SUITABLE ABSORB TO SPILL AREA. MINIMIZE SKIN CNTCT. KEEP
PROD OUT OF SEWERS & WATERCOURSES BY DIKING/IMPOUNDING. ADVISE AUTHS I F
PROD HAS ENTERED OR MAY ENTER SEWERS,
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: KEEP CONTAINERS CLOSED WHEN NOT IN USE. DO
NOT STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions: EMPTY CNTNRS RETAIN RESIDUE (LIQ &/OR VAP) & CAN BE
DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR
EXPOSE SUCH CNTNRS TO HEAT, FLAME, SPKS, STATIC ELEC OR OTHER SOURCES OF IGN
IT; THEY MAY EXPLODE & CAUSE
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 340F,171C
Extinguishing Media: USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures: USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N). DO NOT USE DIRECT STREAM OF WATER. PROD WILL FLOAT & CAN BE REIGNITED
ON SURF OF WATER. MATL WILL (SUPDAT)
Unusual Fire/Explosion Hazard: USE PRODUCT W/CAUTION AROUND HEAT, SPARKS, PILOT
LIGHTS, STATIC ELECTRICITY & OPEN FLAME. PRODUCT CAN BURN UPON HEATING TO
TEMPERATURES AT OR ABOVE FLASH POINT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR MAY BE WORN TO PREVENT
OVEREXPSOURE BY INHALATION IF NEEDED.
Ventilation: USE LOC EXHST TO CAPTURE VAP, MISTS OR FUMES IF NEC. PROVIDE VENT
SUFFICIENT TO PVNT EXCEEDING RECOM EXPOS LIM
Protective Gloves: CHEMICAL RESISTANT (NITRILE) GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N). USE
CHEM-RESISTANT APRON/OTHER IMPERVIOUS CLTHG, IF NEEDED, TO
Work Hygienic Practices: MINIMIZE BRTHG VAP, MIST OR FUMES. AVOID PRLNGD/RPTD
CNTCT W/SKIN. REMOVE CONTAMD CLTHG; LAUNDER OR DRY-CLEAN
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR" VERSIN
FOR ADDNL INFO (FP N). FIRE FIGHT PROC: NOT BURN UNLESS PREHEATED. COOL FIRE
EXPOSED CNTNRS W/WATER. HAZ DECOMP PRODS: & GASES WILL EVOLVE WHEN THIS
MAT L UNDERGOES PYROLYSIS OR COMBUST. CARBON MONOXIDE & OTHER
UNIDENTIFIED ORG CMPDS MAY BE FORMED UPON COMBUST.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 0.86-0.88
Solubility in Water: NEGLIGIBLE
Appearance and Odor: CLEAR LIGHT LIQUID; PETROLEUM OIL ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, OPEN FLAMES AND OXIDIZING MATERIALS.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: THERMAL DECOMP PRODS ARE HIGHLY DEPENDENT ON
COMBUST CNDTNS. COMPLEX MIX OF AIRBORNE SOLID, LIQ, PARTICULATES (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: UNITY SEWING MACHINE OIL, 20122U
Company: SMITH SEWING MACHINES
Street: 3551 EL CAJON BLVD SUITE B
City: SAN DIEGO CA
Zipcode: 92104
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 06/26/1996
Status Code: C
Label Date: 06/26/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: SKIN: SLIGHTLY IRRITATING.
PROLONGED OR REPEATED CONTACT MAY CAUSE DERMATITIS, OIL ACNE OR FOLLICULITIS.
EYES: SLIGHT IRRITATION, STINGING, TEARING AND REDNESS. INGESTION: ASPIRATI
ON INTO LUNGS MAY CAUSE MILD TO SEVERE PULMONARY INJURY AND POSSIBLY DEATH.
INHALATION: MAY CAUSE IRRITATION OF THE NOSE OR THROAT. CHRONIC: CANCER
HAZARD. CONTAINS MATERIAL WHICH IS LISTED AS A HUMAN SKIN CARCINOGEN (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
229B9500, DEVRAN 229 ACRYLIC EPOXY GLOSS (SUP DAT)
| 29354-73-2
25068-38-6
88230-35-7
123-86-4
71-36-3
108-65-6
13463-67-7
1330-20-7 |
|
C/S INK REMOVER, 5928
| |
|
K 1586 AM
| |
|
SOLDER BRITE 95/5
| 7440-36-0
7440-31-5 |
|
DEVFLEX 604 WATER BASED HIGH GLOSS ENAMEL, 604S3501
| 111-76-2
112-34-5
64742-88-7
13463-67-7
7732-18-5 |
|
ACCELERATOR BLEND, S50X56
| |
|
WISK POWER PLUS LIQUID LAUNDRY DETERGENT
| |
|
ACTREL ED 22
| |
|
AQUADEX 36231 GRAY, 9002W104
| 872-50-4
25265-77-4
111-76-2
84-74-2 |
|
ZEPRESERVE 111,0315
| |
|
CRYSTAL 1 HIGH GLOSS VARNISH
| 8052-41-3
111-15-9
71-23-8
138-86-3 |
|
SPECGROUT HS - PART B
| |
|
RUSTLIK WS-5050, 74016-1 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74056-5 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74306-30 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, 74556-55 GAL
| 10213-77-1
102-71-6 |
|
RUSTLIK WS-5050, RL700-1 TOTE
| 10213-77-1
102-71-6 |
|
DPD 3, P-6743
| 7681-11-0
7732-18-5 |
|
ROAD RUNNER, 0318
| |
|
TURBINE OIL GST ISO 46, CPS253027
| |
|
ACETREL ED 22
| |
|
CORTEC 422
| |
|
CORTEC 423
| |
|
UNITY SEWING MACHINE OIL, 20122U
| |
|
CATION RESIN, 2432
| 63182-08-1
7732-18-5 |
|
MMS 419, CAAPCOAT FP-80 FILLED (SUPP DATA)
| |
|
MMS 419, CAAPCOAT FE-AS OR FLUOROELASTOMER (SUPDAT)
| |
|
NICKEL PLATED NONWOVEN MAT, 8000823
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000842
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000843
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000844
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000855
| 7440-02-0 |
|
NICKEL PLATED NONWOVEN MAT, 8000877
| 7440-02-0 |
|
PETROLEUM HYDROCARBON PLUS ADDITIVE, 11311
| |
|
DELTA HIGH TEMP-MASTER INSULATING CEMENT
| |
|
ISM-450, PESTICIDE DEGRADATION SOLUTION (SUPDAT)
| 540-81-1
72-20-8
50-29-3 |
|
IONPHOR CATION CU ELECTROLYTE BUFFER, 044137
| 7732-18-5
7758-99-8
64-18-6
17455-13-9 |
|
IONPHOR ANION PMA ELECTROLYTE BUFFER, 044138
| 7732-18-5
89-05-4
1310-73-2
60-26-4
102-71-6 |
|
DIAMOND GLAZE PART A-WHITE, 14-00/150
| 151-56-4
67-63-0
111-76-2 |
|
SYNTHETIC WATER COMPOUND
| |
|
733 GLASS & METAL SEALANT, CLEAR
| 4253-34-3
112945-52-5
17689-77-9
70131-67-8 |
|
GS-2/E
| |
|
GS-3/E
| |
|
GS-101/E
| |
|
AR-GLO 4-P
| |
|
AR-GLO 101
| |
|
GAX-16, 02275
| |
|
N450-1 THINNER/CLEANER
| 1330-20-7 |
|
FIRST DEFENSE PRACTICE-INSERT
| 67-17-5
7732-18-5
57-55-6 |
|
CARPET TILE ADHESIVE
| |
|
|