AREMCO PRODUCTS INC -- AREMCO-BOND 526 BASE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDJYZ
MSDS NAME: AREMCO-BOND 526 BASE
Responsible Party
Name: AREMCO PRODUCTS INC
Address: 23 SNOWDEN AVE
City: OSSINING NY 10562
Info Phone: 914-762-0685
Emergency Phone Number: 914-941-5177; 914-941-6609
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: AREMCO PRODUCTS INC
Address: 707-B EXECUTIVE BLVD
Box: 517
City: VALLEY COTTAGE NY 10989
Phone: 914-762-0685
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: ALLERGIES AND/OR ASTHMA AND NASAL IRRITATION
MAY BE AGGRAVATED BY EXPOSURE, ERYTHEA, EDEMA. SKIN CONTACT: WHEN HEATED WILL
CAUSE BURNS. EYE CONTACT: BURNING, ITCHING, REDNESS FROM HEATED F UMES.
INGESTION: NO KNOWN ADVERSE EFFECTS BUT COULD BE IRRITATING TO DIGESTIVE
SYSTEM.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: ALLERGIES AND/OR ASTHMA AND NASAL
IRRITATION MAY BE AGGRAVATED BY EXPOSURE.
First Aid: INHAL: REMOVE TO FRESH AIR AT ONCE IF BREATHING ON OWN. IF BREATHING
HAS STOPPED APPLY ARTF RESP. GET MEDICAL ATTENTION. SKIN: PROMPTLY WASH
THOROUGHLY W/MILD SOAP & WATER. REMOVE CONTAMINATED CLOTHIN G. EYES:
FLUSH EYES IMMEDIATELY (WITHIN20 SECONDS) W/WATER FOR AT LEAST 15 MINUTES.
GET MEDICAL ATTENTION. INGEST: GET MEDICAL ATTENTION. NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. WEAR EYE PROTECTION
AND IMPERVIOUS CLOTHING. ABSORB AND TRANSFER TO CLOSABLE CONTAINER FOR
DISPOSAL. FLUSH CONTAMINATED AREA WITH SOAP AND WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Handling And Storage Precautions: WEAR PROTECTIVE GLOVES AND ANSI APPROVED
CHEMICAL EYE GOGGLES. STORE AT ROOM TEMPERATURE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >250F,>121C
Extinguishing Media: CARBON DIOXIDE FOAM.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). USE WATER SPRAY TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard: VAPORS AND FUMES FROM BURNING CAUSE RESPIRATORY
PROBLEMS. HANDLE AS A COMBUSTIBLE LIQUID.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE A NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS IF
CONCENTRATION IS OVER 5 PPM.
Ventilation: LOCAL EXHAUST.
Protective Gloves: RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: WASH HANDS AND FACE IMMEDIATELY AFTER USE.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 1
Vapor Density: 1
Spec Gravity: 1.2
Solubility in Water: NEGLIGIBLE
Appearance and Odor: CLEAR TO HAZY, STRAW COLORED LIQUID; SLIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HIGH HEAT AND MOISTURE. KEEP BELOW 375F.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE, ALDEHYDES,
SILICA.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT IF KEPT BELOW 375F.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: AREMCO-BOND 526 BASE
Company: AREMCO PRODUCTS INC
Street: 707-B EXECUTIVE BLVD
PO Box: 517
City: VALLEY COTTAGE NY
Zipcode: 10989
Health Emergency Phone: 914-941-5177; 914-941-6609
Label Required IND: Y
Date Of Label Review: 03/18/1997
Status Code: C
Label Date: 03/18/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION: ALLERGIES AND/OR ASTHMA AND NASAL
IRRITATION MAY BE AGGRAVATED BY EXPOSURE, ERYTHEA, EDEMA. SKIN CONTACT: WHEN
HEATED WILL CAUSE BURNS. EYE CONTACT: BURNING, ITCHING, REDNESS FROM H EATED
FUMES. INGESTION: IRRITATION TO DIGESTIVE SYSTEM. CHRONIC: NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.