PART B HARDENER, ANCHOR-IT 520 GENERAL (SUPP DATA)
CAS
:
NAME
:
*** proprietary ***
ADHESIVES TECHNOLOGY CORP -- PART B HARDENER, ANCHOR-IT 520 GENERAL (SUPP
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDKWR
MSDS NAME: PART B HARDENER, ANCHOR-IT 520 GENERAL (SUPP DATA)
Responsible Party
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST, SUITE 101
City: KENT WA 98032
Info Phone: 206-850-2400
Emergency Phone Number: 800-255-3924
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ADHESIVE TECHNOLOGY CORP
Address: 4210 B STREET N.W. SUITE D
City: AUBURN WA 98001
Phone: 206-850-2400
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST SUITE 101
City: KENT WA 98032
Phone: 206-850-2400
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CONTACT WITH SKIN WILL CAUSE SEVERE BURNS. AVOID BREATHING
VAPORS.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INGEST:CALL MD IMMEDIATELY (FP N). SKIN:WASH W/WATERLESS HAND
CLEANER THEN WARM SOAP & WATER FOR 15 MINUTES, THEN APPLY PROTECTIVE
CREAM. REMOVE CONTAMINATED CLOTHING IMMEDIATELY. INHAL:REMOVE TO FRES H AIR.
EYES:CALL MD. FLUSH W/WARM WATERFOR AT LEAST 15 MINUTES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEAN UP W/ABSORBENT MATERIAL. WASH AREA W/WARM,
SOAPY WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N).
Handling And Storage Precautions: AVOID ALL CONTACT W/SKIN AND EYES.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 200F,93C
Extinguishing Media: FOAM, CO*2, FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). AVOID BREATHING VAPORS.
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN (FP N).
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N). USE PROTECTIVE CLOTHING AT ALL TIMES.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: MFR'S TRADE NAME/PART NO:PURPOSE COATING.
=======================================================
Physical/Chemical Properties
=======================================================
Solubility in Water: VERY LOW
Appearance and Odor: WATER WHITE LIQUID.
Percent Volatiles by Volume: >99
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: DO NOT MIX OR STORE W/STRONG OXIDANTS.
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PART B HARDENER, ANCHOR-IT 520 GENERAL (SUPP DATA)
Assigned IND: Y
Company: ADHESIVES TECHNOLOGY CORP
Street: 8041 S 228TH ST SUITE 101
City: KENT WA
Zipcode: 98032
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 03/25/1997
Status Code: C
Label Date: 03/25/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: CORROSIVE TO SKIN. ACUTE:CONTACT WITH SKIN WILL CAUSE
SEVERE BURNS. AVOID BREATHING VAPORS. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.