COURTAULDS COATINGS -- ACRYLIC EXTERIOR PAINT 524-AUTUMN RED
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJLBB
MSDS NAME: ACRYLIC EXTERIOR PAINT 524-AUTUMN RED
Responsible Party
Name: COURTAULDS COATINGS
Address: 400 S 13TH STREET
City: LOUISVILLE KY 40203
Info Phone: 502-588-9200
Emergency Phone Number: 800-854-6813
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: COURTAULDS COATINGS INC
Address: 400 S 13TH STREET
City: LOUISVILLE KY 40203-1714
Phone: 502-588-9651
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALATION OF SOLVENT VAPOR MAY CAUSE NOSE, THROAT
AND LUNG IRRITATION. DIRECT EYE CONTACT MAY CAUSE MODERATE TO SEVERE
IRRITATION. MAY CAUSE AN ALLERGIC SKIN OR RESPIRATORY REACTION IN PEOPLE WHO
ARE SENSITIVE (ALLERGIC) TO ACRYLIC POLYMERS. REPEATED OR PROLONGED
OVEREXPOSURE MAY CAUSE LIVER, KIDNEY AND CENTRAL NERVOUS SYSTEM DAMAGE.
POSSIBLE BIRTH DEFECT HAZARD. CONTAINS ETHYLENE GLYCOL W HICH MAY CAUSE BIRTH
DEFECTS BASED ON ANIMAL DATA.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. TAKE TO PHYSICIAN FOR MEDICAL
TREATMENT. SKIN: WASH AFFECTED AREA WITH LARGE AMOUNTS OF WA TER. REMOVE
CONTAMINATED CLOTHING. INGESTION: CALL A PHYSICIAN IMMEDIATELY (FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT SURFACES,
AND ELECTRICAL, STATIC OR FRICTION SPARKS). AVOID BREATHING VAPORS, AND
VENTILATE AREA. REMOVE WITH INERT ABSORBENT SUCH AS SAND, KITTY LITTER, ET C,
AND USE NON-SPARKING TOOLS.
Waste Disposal Methods: DISPOSE OF IN A SAFE MANNER IN ACCORDANCE WITH LOCAL,
STATE, AND FEDERAL REGULATIONS THAT APPLY TO INCINERATION OR SECURE LANDFILL.
Handling And Storage Precautions: SECURE CLOSURES & KEEP CONTRS UPRIGHT TO
PVNT LEAKAGE. STORE LGE QTYS ONLY IN BLDGS DESIGNED TO COMPLY W/OSHA
1910.106. DO NOT STORE ABOVE 120F. DO NOT TAKE INTERNALLY. DO NOT GET IN
EYES/ON SKIN. AVO ID BRTHG VAPS/SPRAY MIST. DO NOT STORE/USE NEAR HEAT.
Other Precautions: DO NOT FLAME CUT, BRAZE/WELD W/OUT NIOSH APPRVD MECH FILTER
RESP/APPROP & ADEQ VENT. ALL ELEC EQUIP & INSTALLATIONS SHOULD BE
MADE & GROUNDED I/A/W NATL ELEC CODE. IF WORKMEN ARE EXPOSED TO SPRAY
APPL ICATION/ABRASIVE BLAST CLEANING, ENGINEERING & ADMIN CTLS MUST BE
USED TO MAINTAIN EXPOS LEVEL BELOW OSHA (SUP DAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Lower Limits: 0.7%
Upper Limits: 1.0%
Extinguishing Media: FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). REFER TO D.O.T. P 5800.3 "1984 EMERGENCY RESPONSE BOOK:
GUIDEBOOK FOR HAZARDOUS MATERIALS' INCIDENTS" GUIDE # 26, ID # 1263.
Unusual Fire/Explosion Hazard: KEEP CONTRS TIGHTLY CLOSED. ISOLATE FROM HEAT,
SPARKS, ELECTRICAL EQUIP, & OPEN FLAME. CLOSED CONTRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. IN THE ABSENCE OF ELECTRICITY, A WATER SPRAY (FOG
NOZZLE IS PREFERRED) MAY BE USED TO COOL CONTRS. AVOID EXPOS TO DECOMP.
FLAMMABILITY CLASSIFICATION:
OSHA: N/A.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENTILATION, USE
NIOSH APPROVED MECHANICAL FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENTILATION AR
EAS, USE NIOSH APPROVED MECHANICAL FILTER RESPIRATORS DESIGNED TO REMOVE
PARTICULATES. IN CONFINED AREAS, USE NIOSH APPROVED AIR-LINE RESPS &
HOODS.
Ventilation: PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENTILATION KEEP REMOVE
DECOMPOSITION PRODUCTS DURING WELDING & FLAME CUTTING ON SURFACES COATED
W/THIS PRODUCT.
Protective Gloves: USE A HEAVY DUTY RUBBER GLOVE, SUCH AS NEOPRENE TYPE GLOVE
AS NEEDED.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). AS NEEDED, USE BODY PROTECTION, SUCH AS RUBBER APRON, ETC.
Work Hygienic Practices: BEFORE SMOKING OR EATING, WASH HANDS THOROUGHLY.
Supplemental Safety and Health: OTHER PREC: REQUIRED LEVEL, OR USE NIOSH
APPROVED MECHANICAL FILTER RESPIRATORS FOR PROTECTION.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =100.C, 212.F
Vapor Pres: SEE INGREDIENT 1
Vapor Density: HVR/AIR
Spec Gravity: 1.26-1.35 (FP N)
Evaporation Rate & Reference: SLOWER THAN ETHER
Percent Volatiles by Volume: 60 - 61
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE KNOWN.
Materials To Avoid: NONE KNOWN.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: ETHYLENE GLYCOL IS A CHEMICAL SUBJECT TO THE
REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III AND OF 40 CFR 372.
=======================================================
Other Information
=======================================================
Other Information: WEIGHT PER GALLON: 10.5 - 11.26 LBS. PRODUCT CLASS: ACRYLIC.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ACRYLIC EXTERIOR PAINT 524-AUTUMN RED
Company: COURTAULDS COATINGS INC
Street: 400 S 13TH STREET
City: LOUISVILLE KY
Zipcode: 40203-1714
Health Emergency Phone: 800-854-6813
Label Required IND: Y
Date Of Label Review: 08/30/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION OF SOLVENT VAPOR MAY CAUSE NOSE,
THROAT AND LUNG IRRITATION. DIRECT EYE CONTACT MAY CAUSE MODERATE TO SEVERE
IRRITATION. MAY CAUSE AN ALLERGIC SKIN OR RESPIRATORY REACTION IN PEOPLE WHO
ARE SENSITIVE (ALLERGIC) TO ACRYLICPOLYMERS. CHRONIC: REPEATED OR PROLONGED
OVEREXPOSURE MAY CAUSE LIVER, KIDNEY AND CENTRAL NAERVOUS SYSTEM DAMAGE.
POSSIBLE BIRTH DEFECT HAZARD. CONTAINS ETHYLENE GLYCOL WHICH MAY CAUSE BIRTH
DEFECTS BASED ON ANIMAL DATA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.