ACE HARDWARE CORPORATION -- INDUSTRIAL MAINTENANCE LATEX TRAFFIC MARKING
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJLDR
MSDS NAME: INDUSTRIAL MAINTENANCE LATEX TRAFFIC MARKING PAINT, 270A100
Responsible Party
Name: ACE HARDWARE CORPORATION
Address: 21901 SOUTH CENTRAL AVENUE
City: MATTESON IL 60443
Info Phone: 708-720-0600
Emergency Phone Number: 630-990-6600
Resp. Party Other MSDS No.: FORM # 2773 6/97-1
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ACE HARDWARE CORPORATION
Address: 21901 SOUTH CENTRAL AVENUE
City: MATTESON IL 60443
Phone: 708-720-0600
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: IN A CONFINED AREA VAPORS IN HIGH CONCENTRATION ARE
ANESTHETIC. IRRITANT TO UPPER RESPIRATORY SYSTEM. CHRONIC PROBLEMS WITH
RESPIRATORY SYSTEM MAY BE AGGRAVATED BY EXPOSURE TO VAPORS.
Signs And Symptions Of Overexposure: LIGHTHEADEDNESS AND STAGGERING GAIT.
Medical Cond Aggravated By Exposure: CHRONIC PROBLEMS WITH RESPIRATORY SYSTEM
MAY BE AGGRAVATED BY EXPOSURE TO VAPORS.
First Aid: INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM &
QUIET. SKIN: WASH FROM SKIN WITH SOAP & WATER. LAUNDER CLOTHING BEFORE
REUSE. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INGESTION : CALL MD
IMMEDIATELY (FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. VENTILATE &
REMOVE WITH INERT ABSORBENT.
Waste Disposal Methods: INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS. DISPOSE OF I/A/W FEDERAL, STATE & LOCAL REGULATIONS
REGARDING POLLUTION.
Handling And Storage Precautions: DOL STORAGE CATEGORY: 3B. AVOID BREATHING
VAPOR OR SPRAY MIST. AVOID CONTACT WITH SKIN OR EYES.
Other Precautions: KEEP OUT OF REACH OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: =92.8C, 199.F
Extinguishing Media: NON-COMBUSTIBLE - FOR DRY SOLIDS USE WATER, FOAM, CO*2,
DRY CHEMICALS.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). WATER MAY BE USED TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS EXPOSED TO EXTREME HEAT MAY
RUPTURE DUE TO PRESSURE BUILD-UP. CONTENTS MAY SPATTER IF TEMPERATURE EXCEEDS
212F. RATING: HEALTH - 1; FLAMMABILITY - 1; REACTIVITY - 0.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED RESPIRATORY DEVICE.
Ventilation: LOCAL EXHAUST: PREFERABLE. MECHANICAL (GENERAL): ACCEPTABLE.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =100.C, 212.F
Vapor Density: HVR/AIR
Spec Gravity: 1.37 (WATER=1)
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: DILUTABLE
Appearance and Odor: COLORED PIGMENTED LIQUID WITH SLIGHT AMMONIA ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: NO HAZARDOUS REACTIONS ARE EXPECTED UNDER NORMAL USE.
Hazardous Decomposition Products: CARBON DIOXIDE & CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: APPROVED BY U.S. DEPARTMENT OF LABOR,
"ESSENTIALLY SIMILAR" TO FORM C3HA1741.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INDUSTRIAL MAINTENANCE LATEX TRAFFIC MARKING PAINT, 270A100
Company: ACE HARDWARE CORPORATION
Street: 21901 SOUTH CENTRAL AVENUE
City: MATTESON IL
Zipcode: 60443
Health Emergency Phone: 630-990-6600
Label Required IND: Y
Date Of Label Review: 06/02/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: ACUTE: IN A CONFINED AREA VAPORS IN HIGH CONCENTRATION
ARE ANESTHETIC. IRRITANT TO UPPER RESPIRATORY SYSTEM. LIGHTHEADEDNESS AND
STAGGERING GAIT. CHRONIC PROBLEMS WITH RESPIRATORY SYSTEM MAY BE AGGRA VATED
BY EXPOSURE TO VAPORS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.