ITW DEVCON -- TITANIUM PUTTY RESIN, 10760; 0113
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJSLS
MSDS NAME: TITANIUM PUTTY RESIN, 10760; 0113
Responsible Party
Name: ITW DEVCON
Address: 30 ENDICOTT ST
City: DANVERS MA 01923
Info Phone: 978-777-1100
Emergency Phone Number: 800-424-9300
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEVCON CORP
Address: 30 ENDICOTT ST
City: DANVERS MA 01923-3753
Phone: 1-508-777-1100
=======================================================
Item Description Information
=======================================================
Item Name: SEALING COMPOUND
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: CE6880000
Name: BISPHENOL A EPOXY RESIN; (BISPHENOL A DIGLYCIDYL ETHER RESIN)
% low Wt: 25.
% high Wt: 35.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50: (ORAL,RAT) NOT AVAILABLE.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: SKIN: MODERATE IRRITANT. CONT AT ELEVATED
TEMPERATURES CAN CAUSE THERMAL BURNS. MAY CAUSE SKIN SENSITIZTION (RASHES,
HIVES). EYES: MODERATE IRRITANT. CONT AT ELEVATED TEMPERATURES CAN CAUSE THE
RMAL BURNS. INHAL: LOW VAPOR PRESSURE OFRESIN MAKES INHALATION UNLIKELY IN
NORMAL USE. INGEST: ACUTE ORAL TOXICITY IS LOW. MAY CAUSE GASTRIC DISTRESS.
EFTS OF CHRONIC OVEREXP: PROLONGED OR REPEATED SK IN CONTACT MAY CAUSE
SENSITIZATION, WITH ITCHING, SWELLING, OR RASHES ON LATER EXPOSURE.
Explanation Of Carcinogenicity: CANCER-SUSPECT CONSTITUENT(S): NONE.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: PREEXISTING EYE AND SKIN DISORDERS.
DEVELOPMENT OF PREEXISTING SKIN OR LUNG ALLERGY SYMPTOMS MAY INCREASE.
First Aid: EYES: FLUSH W/CLEAN WATER FOR AT LST 15 MINUTES WHILE GENTLY HOLDING
EYELIDS OPEN. GET IMMED MED ATTN. SKIN: IMMED REMOVE CONTAMD CLTHG &
EXCESS CONTAMINANT. FLUSH SKIN W/WATER. WASH THOROUGHLY W/SOAP & WARM
WATER. CONSULT PHYS IF IRRIT DEVELOPS. INHAL: REMOVE PATIENT TO FRESH AIR.
ADMINISTER OXYG IF BRTHG IS DFCLT. GET MED ATTN IF SYMPS PERSIST. INGEST: DO
NOT INDUCE VOMIT. GIVE 2 GLASSES OF WATE R TO DILUTE IF PATIENT IS CONSCIOUS.
GET MED ATTN. NOTE TO PHYS: IN GENERAL, EMESIS INDUCTION IS UNNECESSARY IN
HIGH VISCOSITY, LOW VOLATILITY PRODS, E.G., NEAT EPOXY RESINS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SPILL CTL: AVOID PERSONAL CONT. ELIM IGNIT SOURCES.
VENTILATE AREA. CONTAINMENT: DIKE, CNTN & ABSORB W/CLAY, SAND/ OTHER
SUITABLE MATL. CLEANUP: FOR LG SPILLS, PUMP TO STOR/SALV VESSELS. SOAK UP
RESID UE W/ABSORB SUCH AS CLAY, SAND/OTHER SUITABLE MATL & DISPOSE OF
PROPERLY. FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE. SPEC PROC: PVNT SPILL
FROM ENTERING DRAINAGE/SEWER SYS, WATERWAYS, & SURF WATER.
Waste Disposal Methods: IF THIS RESIN BECOMES A WASTE, IT WOULD NOT BE HAZ
WASTE BY RCRA CRITERIA (40CFR261). DISPOSE OF ACCORDING TO APPLICABLE
FEDERAL, STATE, AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN COOL, DRY AREA AWAY FROM HIGH TEMPS
& FLAMES. AVOID CONT W/SKIN, EYES, OR CLTHG. WASH THOROUGHLY W/SOAP &
WATER AFTER USING & PARTICULARLY BEFORE EATING, DRINKING, SMKNG, APPLYING
COSMETICS/U SING TOILET FACILITIES. LAUNDER CONTAMDCLTHG & PROTECTIVE
GEAR BEFORE REUSE.
Other Precautions: DISCARD CONTAMD LEATHER ARTICLES. HNDL MIXED RESIN &
HARDENER I/A/W POTNTL HAZ OF CURING AGENT USED. PROVDE APPROP VENT/NIOSH
APPRVD RESP PROT AGAINST DECOMP PRODS (SEE STABILUTY LITY REACTIVITY SECTI
ON) DURING WELDING/FLAME CUTTING OPERATIONS & TO PROTECT AGAINST NUISANCE
DUST DURING SANDING/GRINDI NG OF CURE PRODUCT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: >204.4C, 400.F
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: MATL WILL NOT BURN UNLESS PREHEATED. DO NOT ENTER
CONFINED SPACE W/OUT FULL BUNKER GEAR. USE NIOSH APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT (FP N). COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard: HEATING > 300 F IN PRESENCE OF AIR MAY CAUSE
SLOW OXIDATIVE DECOMP & >500 F MAY CAUSE POLYMERIZATION. HAZ PRODS OF
COMBUST: WHEN HEATED TO DECOMP IT EMITS FUMES OF CL-, CARBON MONOXIDE, OTHER
FUMES & VAPORS VARYING IN COMPOSITION AND TOXICITY.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED AT NORMAL HANDLING TEMPS &
CONDITIONS. USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGES FOR UNCURED RESIN
& NIOSH APPRVD DUST/PARTICLE RESPIRATORS DURING GRINDING/SANDING
OPERATIONS OF CURED RESIN AS EXPOSURE LEVELS DICTATE.
Ventilation: LOC EXHST VENT IS PREFERRED ALTHOUGH GOOD GEN MECH VENT IS USUALLY
ADEQ FOR MOST INDUS APPLICATIONS. LOC EXHST IS REC FOR CONFINED AREAS.
Protective Gloves: CHEMICAL-RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
OTHER GEAR AS RQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices: WASH THOROUGHLY WITH SOAP AND WATER AFTER USING AND
PARTICULARLY BEFORE EATING, DRINKING, SMOKING, APPLYING COSMETICS, OR USING
TOILET FACILITIES.
Supplemental Safety and Health: VOC (G/L):0. PH:(5% SOLN/ SLURRY IN
H*2O):NEUT.%SOLIDS BY WT:0. CNDTNS TO AVOID POLYMER: UNIDENTIFIED FUMES &
VAPS WHICH MAY BE TOXIC. TOX INFO: /OTHER COMMERCIAL RESINS YIELDED LIMITED
EVID OF WEAK C ARCIN. AUTHORS CONCLUDED THAT RENAL TUMOR EVID W/EPON 828 "WAS
OF NO BIOLOGICAL SIGNIFICANCE" & THAT RESIN (OTHER INFO)
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >260.C, 500.F
Vapor Pres: 0.03 @ 171F
Vapor Density: >1(AIR=1)
Spec Gravity: 1.1-1.3
PH: SUPDAT
Solubility in Water: NEGLIGIBLE
Appearance and Odor: VISCOUS LIQUID WITH LITTLE ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OPEN FLAME AND EXTREME HEAT.
Materials To Avoid: STRONG LEWIS OR MINERAL ACIDS, STRONG OXIDIZING AGENTS,
STRONG MINERAL & ORGANIC BASES (ESPECIALLY PRIMARY & SECONDARY ALIPHATIC
AMINES).
Hazardous Decomposition Products: OXIDES OF CARBON; ALDEHYDES, ACIDS & OTHER
ORGANIC SUBSTANCES MAY BE FORMED DURING COMBUSTION OR ELEVATED TEMPERATURE
(>500F) DEGRADATION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: HEAT IS GENERATED WHEN RESIN IS MIXED
W/CURING AGENTS; RUN-A-WAY CURE RXNS MAY CHAR & DECOMPOSE RESIN,
GENERATING(SUPDAT)
=======================================================
Toxicological Information
=======================================================
Toxicological Information: ACUTE ORAL EFTS: LD50(RAT): NOT AVAIL. ACUTE DERMAL
EFTS: LD50(RABBIT): NOT AVAIL. ACUTE INHAL EFTS: LC50(RAT): NOT AVAIL. EYE
IRRIT: NOT AVAIL. SUBCHRONIC EFTS: NO DATA AVAIL. CARCINOGENICITY, TERATO
GENICITY, & MUTAGENICITY: BOTH RESIN &DIGLCIDYL ETHER OF BISPHEOL A
(COMPONENT OF PROD) HAVE PROVED TO BE INACTIVE WHEN TESTED BY VIVO
MUTAGENCITY ASSAYS. BOTH HAVE SHOWN ACTIVITY BY IN VITRO MICROBIA L
MUTAGENICITY SCREENING & HAVE PRDCED CHROMOSOMAL ABERRATIONS IN CULTURED
RAT LIVER CELLS. OTHER CHRONIC EFTS: 2-YEAR BIOASSAYS IN MICE EXPOSED BY
DERMAL ROUTE TO EPON 828, DGEBPA, (SUPDAT)
=======================================================
Ecological Information
=======================================================
Ecological: ECOTOXICITY, MOBILITY & PERSISTENCE & ENVIRONMENTAL FATE:
NO DATA AVAILABLE.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: PROPER SHIPPING NAME: NON-REGULATED. TECHNICAL NAME:
N/A. HAZARD CLASS: N/A. UN NUMBER: N/A. PACKING GROUP: N/A. EMERGENCY
RESPONSE GUIDE NO.: N/A. IMDG PAGE NUMBER: N/A. OTHER: N/A.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SUBSTANCES FOR WHICH " TOXIC CHEM" COLUMN IS MARKED
"YES" ARE ON SARA SECTION 313 LIST OF TOXIC CHEMICALS, FOR WHICH RELEASE RPTG
MAY BE REQUIRED: NONE. FOR SPECIFIC REQUIREMENTS, CONSULT APPROP REGS . FOR
PURPOSES OF SARA SECTION 312 HAZMATLS INVENTORY RPTG, FOLLOWING HAZ CLASSES
APPLY TO THIS MATL:-IMMED HLTH HAZ-DELAYED HLTH HAZ-CANADIAN REGULATIONS. W
HAZ CLASS(ES):D2B. ALL COMPONENTS OF THIS PROD ARE ON THE DOMESTIC
SUBSTANCES LIST.
Federal Regulatory Information: U.S. FED REGS: TSCA - ALL INGREDS OF THIS PROD
ARE LISTED/ARE EXEMPT FROM LISTING, ON TSCA INVENTORY. EXPORT NOTIFICATION IS
REQD UNDER TSCA SEC. 12B--SEE BELOW. FOLLOWING RCRA CODE(S) APPLIES TO THIS
MATL IF IT BECOMES WASTE: NONE. REGULATORY STATUS OF HAZ CHEM CONSTITUENTS OF
THIS PROD: BISPHENOL A DIGLYCIDYL ETHER RESIN: EXTREMELY HAZ*-NO, TOXIC
CHEM**-NO CERCLA RQ(LBS)-0.0. TSCA 12B EXPORT N0T IFICATION-REQD. CONSULT
APPROP REGS FOR EMER PLANNING & RELEASE RPTG REQUIREMENTS FOR SUBSTANCES
ON SARA SECTION 301 EXTREMELY HAZ SUBSTANCE LIST. (OTHER INFO)
=======================================================
Other Information
=======================================================
Other Information: THIS INFORMATION APPLIES TO THE RESIN COMPONENT OF THE
TWO-PART KIT; HANDLE FRESHLY-MIXED RESIN AND HARDENER AS RECOMMENDED FOR THE
HARDENER. AFTER CURING, THE PRODUCT IS NOT HAZARDOUS. RATING: H EALTH -2*,
FLAMMABILITY -1, REACTIVITY-1. SUPDAT: "IS NOT SYSTEMIC CARCIN WHEN APPLIED
TO DORSAL SKIN OF CF1 MICE." TOX INFO ON HAZ CHEM CONSTITUENTS OF THIS PROD:
BISPHENOL A DIGLYCIDYL ETHER RESIN: LD50 (ORAL,RAT) 30 G/KG. DERMAL LD50
(RABBIT) >20 MG/KG. INHAL LC50 4HR, (RAT) NO DEATHS.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 150558
MSDS NAME: TITANIUM PUTTY RESIN, 10760; 0113
MSDS Prepared Date: 12/08/1998
Review Date: 12/06/1999
Multiple KIT Number: 0
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TITANIUM PUTTY RESIN, 10760; 0113
Company: DEVCON CORP
Street: 30 ENDICOTT ST
City: DANVERS MA
Zipcode: 01923-3753
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 10/06/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN: MODERATE IRRITANT. CONTACT AT ELEVATED
TEMPERATURES CAN CAUSE THERMAL BURNS. MAY CAUSE SKIN SENSITIZTION (RASHES,
HIVES). EYES: MODERATE IRRITANT. CONTACT AT ELEVATED TEMPERATURES CAN CAU SE
THERMAL BURNS. INHAL: LOW VAPOR PRESSURE OF RESIN MAKES INHALATION UNLIKELY
IN NORMAL USE. INGEST: ACUTE ORAL TOXICITY IS LOW. MAY CAUSE GASTRIC
DISTRESS. EFTS OF CHRONIC OVEREXP: PROLONGED OR REPE ATED SKIN CONTACT MAY
CAUSE SENSITIZATION, WITH ITCHING, SWELLING, OR RASHES ONLATER EXPOSURE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|