THIN FILM TECHNOLOGY INC -- BIO-DUR 561 CURING AGENT WHITE, BD561-17880B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJXYV
MSDS NAME: BIO-DUR 561 CURING AGENT WHITE, BD561-17880B
Kit Part: Y
Responsible Party
Name: THIN FILM TECHNOLOGY INC
Box: 580669
City: HOUSTON TX 77258-0669
Info Phone: 281-286-4011
Emergency Phone Number: 281-286-4011
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALATION: NOTICE - DO NOT INHALE PRODUCT. MAY
CAUSE IRRITATION TO UPPER RESPIRATORY TRACT UPON PROLONGED OR REPEATED
INHALATION. (NOTE: BECAUSE OF LOW VOLATILITY OF PRODUCT AND PASTY VISCOSIT Y
IT IS EXTREMELY UNLIKELY THAT EXCESSIVE EXPOSURE TO VAPORS WILL BE
EXPERIENCED AT NORMAL TEMPERATURES UNDER NORMAL CIRCUMSTANCES.) EYE AND SKIN
CONTACT: CAUSES MODERATE & SKIN IRRITATION OR BURNS. M AY CAUSE PERMANENT
VISUAL IMPAIRMENT. WEAR PROTECTIVE CLOTHING AND GOGGLES IF CONTACT IS
OTHERWISE POSSIBLE.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: CAUTION: PREEXISTING EYE, SKIN & RESP
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT, EXERCISE CAUTION IN
HANDLING. REMOVE FROM SKIN USING LIQUID SOAP (SUPDAT)
First Aid: EYE CONT: IMMED FLUSH W/FRESH WATER HOLDING LIDS APART FOR AT LST 15
MINS, WASHING W/IN ONE MINUTE IS ESSENTIAL TO ACHIEVE MAXIMUM EFTIVENESS.
SKIN CONT: REMOVE FROM SKIN USING SOAP & WATER. AVOID USI NG SOLVENTS TO
REMOVE ANY SKIN CONTAM. REMOVE CONTAMD SHOES & CLTHG. DO NOT APPLY
GREASES/OINTMENTS. VICTIMS OF MAJOR SKIN CONT SHOULD REMAIN UNDER MED
OBSERVATION FOR AT LST 24 HRS DUE TO POSSIBLE DE LAYED EFTS. INGEST: IN EVENT
OF INGEST ADMIN 3-4 GLASSES OF MILK/WATER. DO NOT INDUCE VOMIT. OBTAIN MED
ATTN & HOSPITAL TREATMENT IMMED. INHAL: IN NORMAL USE INHAL IS EXTREMELY
UNLIKELY. (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SCRAPE/WIPE UP SPILLED MATL. PLACE IN CONTAINER FOR
RECOVERY OR DISPOSAL. AVOID CONT WITH SKIN & EYES - WEAR RECOMMENDED
PROTECTIVE CLOTHING. KEEP SPILLS OUT OF SEWERS & OPEN BODIES OF WATER.
Waste Disposal Methods: OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS REGARDING
HEALTH AND THE ENVIRONMENT.
Handling And Storage Precautions: REPEATED AND/OR PROLONGED CONTACT WITH THE
SKIN MAY CAUSE PRIMARY SKIN IRRITATION AND DERMATITIS. ADVERSE RESPIRATORY
EFFECTS SUCH AS COUGHING, LIGHTNESS OF THE CHEST OR SHORTNESS OF BREATH MAY
ALSO O CCUR.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point: >93.3C, 200.F
Extinguishing Media: WATER, SPRAY, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: IGNITION WILL GIVE RISE TO A CLASS B FIRE.
GENERATION OF TOXIC OR IRRITATING PRODUCTS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IT IS EXTREMELY UNLIKELY THAT HARMFUL CONCS OF VOLATILE
MATLS WILL BE RELEASED DURING NORMAL APPLICATIONS BY SPREADERS,
TROWELS/SIMILAR TOOLS IN OPEN AREAS. WEAR NIOSH APPRVD ORGANIC VAPOR
CARTRIDGE R ESPIRATOR OR FRESH AIR HOOD IF WORKING FOR EXTENDED PERIODS IN
ENCLOSED SPACES WITH MINIMAL VENTILATION.
Ventilation: MECHANICAL LOCAL EXHAUST AT PONT OF CONTAMINANT RELEASE IF
CONDITIONS WARRANT.
Protective Gloves: IMPERVIOUS GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). WEAR LONG SLEEVED SHIRTS, COVERALLS AS REQUIRED TO PREVENT
SKIN CONTACT. DISCARD CONTAMINATED GLOVES, FOOTWEAR ETC.
Supplemental Safety and Health: CNDTNS AGGRAVATED BY EXPOSURE: OR DETERGENT -
ALWAYS AVOID USING SOLVENTS TO REMOVE SKIN CONTAM. FIRST AID PROC: IF BRTHG
HAS STOPPED/IS LABORED GIVE MOUTH TO MOUTH ASSISTANCE, PVNT ASPIR OF VOMIT,
MO VE TO FRESH AIR, CALL PHYS. NOTE TO PHYS: THIS PRODUCT IS HIGHLY INJURIOUS
TO ALL TISSUES, SIMILAR TO THAT (OTHER INFO)
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.56
Viscosity: HEAVY PASTE
Solubility in Water: NEGLIGIBLE
Appearance and Odor: WHITE PASTE. AMMONIA ODOR.
Percent Volatiles by Volume: 0.5 MAX
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES WHEN PROD COMES (OTHER INFO)
Stability Condition To Avoid: UNSUPERVISED MIXES W/LG VOLUMES W/EPOXY BASED
MATLS SUCH AS BIO-DUR 561. FOLUMES OF 1 GALLON ARE SAFE HOWEVER EXPECT
SIGNIFICANT EXOTHERM WITHIN 30-40 MINUTES AT 70F.
Materials To Avoid: ACIDS, (E.G. SULFURIC, PHOSPORIC, ACETIC, CITRIC ETC.).
OXIDIZING & REDUCING AGENTS (E.G. PERCHLORATES, NITRATES, HYDRIDES & SULFITES
ETC.). CAUTION! N-NITROSAMINES, MANY OF WHICH ARE KNOWN TO BE POTENT CARCINS
MAY BE FORME
Hazardous Decomposition Products: CO, CO*2, NITROGEN OXIDES, ALDEHYDES,
NITROSAMINES, AMINES, AMMONIA, ORG ACID VAPS & UNSPECIFIED OTHERS.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: FORMULATED PRODUCT: NOT IATA, DOT OR IMO REGULATED.
IATA, IMO & DOT: RESIN COMPOUND NOT REGULATED.
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: OSHA (29CFR1910.1200): IRRITANT. SENSITIZER.
=======================================================
Other Information
=======================================================
Other Information:: HEALTH -2; FLAMMABILITY -1; REACTIVITY -0. SUPDAT: OF
AMMONIA. CHEMICAL PNEUMONITIS, PULMONARY EDEMA, LARYNGEAL EDEMA & DELAYED
SCARRING TO AIRWAY OR OTHER AFFECTED TISSUE MAY OCCUR FOLLOWING EX POSURE.
CLINICAL MANAGEMENT IS BASED ON SUPPORTIVE TREATMENT SIMILAR TO THAT USED FOR
THERMAL BURNS. MATLS TO AVOID: INTO CONTACT W/NITROUS ACID, ATMOSPHERES WITH
HIGH NITROUS OXIDE CONCENTRATIONS, NI TRITES. PHYSICAL DATA: DENSITY @ 20C:
13.0 LBS/GALLON.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: BIO-DUR 561 CURING AGENT WHITE, BD561-17880B
Company: THIN FILM TECHNOLOGY INC
PO Box: 580669
City: HOUSTON TX
Zipcode: 77258-0669
Health Emergency Phone: 281-286-4011
Label Required IND: Y
Date Of Label Review: 12/29/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION: MAY CAUSE IRRITATION TO UPPER
RESPIRATORY TRACT UPON PROLONGED OR REPEATED INHALATION. (NOTE: BECAUSE OF
LOW VOLATILITY OF PRODUCT AND PASTY VISCOSITY IT IS EXTREMELY UNLIKELY THAT
EXCESSIVE EXPOSURE TO VAPORS WILL BE EXPERIENCED AT NORMAL TEMPERATURES UNDER
NORMAL CIRCUMSTANCES.) EYE AND SKIN CONTACT: CAUSES MODERATE & SKIN
IRRITATION OR BURNS. MAY CAUSE PERMANENT VISUAL IMPAI RMENT. CHRONIC: NONE
SPECIFIED BY MANUFACTURER (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
INPRO-CLEAN 2500, 4407
| |
|
HBI-101 MIL
| 64742-94-5
67-64-1
1330-20-7 |
|
BIO-DUR 561 CURING AGENT WHITE, BD561-17880B
| |
|
AOS HEAT SINK COMPOUND, 52022
| |
|
0638, METAL MEDIC
| |
|
850 SERIES WATER BORNE ACRYLIC EPOXY TOPCOAT
| |
|
DOUBLE BUBBLE GREEN, 04004 PART B
| |
|
LESLIE'S FILTER CLEANER
| |
|
LESLIE'S SPRAY & RINSE
| |
|
CUT-MAX 570-ND, 415707
| 64742-52-5
64742-46-7
68410-99-1 |
|
PR-421, 04211 PART B
| |
|
SPRAY STENCIL INK, ALL COLORS, 27004
| |
|
LESLIE'S DE FILTER CLEANER
| |
|
IRM 903
| 64742-52-5 |
|
SILASTIC 738 RTV NON-CORROSIVE ADHESIVE/SEALANT WHITE
| 7631-86-9
1185-55-3
546-68-9
67-63-0
67-56-1
70131-67-8
80801-30-5 |
|
0810002,ANDEROL 401 D SYNTHETIC INSTRUMENT OIL
| |
|
CRISP GUM REMOVER, F4260
| |
|
TONER CARTRIDGE, FO-45ND
| |
|
ZYMIT
| 9003-11-6
57-55-6
9014-01-1
56-81-5 |
|
INTERSHIELD PRORECO 609 CLEAR BASE, PRA610
| 110-43-0
108-10-1
108-65-6
123-86-4 |
|
INTERSHIELD PRORECO 609 CLEAR CONVERTER, PRA611
| 3779-63-3
123-86-4 |
|
TRIFREE BRAKE CLEANER, 03620
| 142-82-5
67-64-1
108-87-2
124-38-9
110-82-7
108-88-3
628-63-7 |
|
SCOTCHBOND MULTIPURPOSE ADHESIV, 70-2010-0402-8
| 1565-94-2
868-77-9
10373-78-1
10287-53-3
58109-40-3 |
|
PRESOLVE (AEROSOL), 01420
| 64742-88-7
5989-27-5
124-38-9 |
|
AKROFAX A SOFT (CAKE), 67378
| |
|
FLOR-DECORATIVE FLAKES
| 108-05-4
7727-43-7
14807-96-6
13845-36-8
13463-67-7
1333-86-4
7440-50-8 |
|
SHIPPING-MATE BOX RENU COATING, 62-4973-4830-0
| 67-64-1
78-93-3
68512-98-1
74-98-6
8030-30-6
108-88-3
1330-20-7
64-17-5
13463-67-7 |
|
PLY#2 PROTECTIVE SKIN CREAM
| |
|
EVERLUBE 9002 (10-955)
| |
|
D.E.H. 26 EPOXY CURING AGENT
| 112-57-2
112-24-3
68131-73-7 |
|
VCI-238 ELECTRICORR
| |
|
STADIS 450 CONDUCTIVITY IMPROVER (DINNSA STABILIZER)
| |
|
CONSERVE SC TURF & ORNAMENTAL INSECT CONTROL
| |
|
SAG 10
| |
|
INTERSHIELD PRORECO 508 NAVY BLUE PART A, PRA559
| 110-43-0
13463-67-7
1333-86-4 |
|
PLY#2 PROTECTIVE SKIN CREAM
| |
|
INTERSHIELD PRORECO 508, PRA556, DARK GRAY PART A
| 110-43-0
13463-67-7
1333-86-4
7631-86-9 |
|
ART UTILITY SPRAY GLUE
| 75-09-2
26523-64-8
124-38-9 |
|
F. P. ETHYL METHACRYLATE MONOMER
| |
|
MAXI-LUBE, 4098
| |
|
LUBE SHIELD PLUS, 4220
| |
|
CALCIUM OXIDE
| |
|
BARIUM NITRATE
| |
|
DRI-SLIDE MULTI-PURPOSE LUBRICANT
| 64742-88-7
1317-33-5
7782-42-5
64742-52-5
85595-45-5
26566-95-0 |
|
DRI-SLIDE MULTI-PURPOSE LUBRICANT AEROSOL
| 64742-88-7
1317-33-5
7782-42-5
64742-52-5
85595-45-5
26566-95-0
68476-86-8 |
|
VESTENAMER 8012, 1252000
| |
|
CAROLINA BLU DNA STAIN
| |
|
SUPER ALL FLEET 30
| 63649-42-3
68649-42-3 |
|
POLYETHYLENE 10462N HIGH DENSITY, 47055
| 26221-73-8 |
|
POLYETHYLENE 955I LOW DENSITY, 23821
| 9002-88-4 |
|
|