PPG INDUSTRIES -- 97-725 THINNER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLGVD
MSDS NAME: 97-725 THINNER
Responsible Party
Name: PPG INDUSTRIES
Address: 4325 ROSANNA DR
City: ALLISON PARK PA 15101
Info Phone: 412-492-5555
Emergency Phone Number: 304-843-1300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PPG INDUSTRIES
Address: 4325 ROSANNA DR
City: ALLISON PARK PA 15101
Phone: 412-492-5555
=======================================================
Ingredients
=======================================================
Cas: 100-41-4
RTECS #: DA0700000
Name: ETHYL BENZENE
% low Wt: 5.
% high Wt: 10.
OSHA PEL: 100 PPM
OSHA STEL: 125 PPM
ACGIH TLV: 100 PPM
ACGIH STEL: 125 PPM
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 108-88-3
RTECS #: XS5250000
Name: TOLUENE
% low Wt: 10.
% high Wt: 20.
OSHA PEL: 100 PPM
OSHA STEL: 150 PPM
ACGIH TLV: 50 PPM
ACGIH STEL: NOT ESTABLISHED
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 1330-20-7
RTECS #: ZE2100000
Name: XYLENE
% low Wt: 30.
% high Wt: 40.
OSHA PEL: 100 PPM
OSHA STEL: 150 PPM
ACGIH TLV: 100 PPM
ACGIH STEL: 150 PPM
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 2807-30-9
RTECS #: KM2800000
Name: 2-PROPOXYETHANOL
% low Wt: 20.
% high Wt: 30.
OSHA PEL: NOT ESTABLISHED
OSHA STEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 67-63-0
RTECS #: NT8050000
Name: ISOPROPYL ALCOHOL
% low Wt: 5.
% high Wt: 10.
OSHA PEL: 400 PPM
OSHA STEL: 500 PPM
ACGIH TLV: 400 PPM
ACGIH STEL: 500 PPM
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGESTION: HARMFUL IF SWALLOWED. EYE: CAUSES SEVERE EYE
IRRITATION. SKIN: CAUSES PRIMARY SKIN IRRITATION. MAY BE ABSORBED THROUGH
THE SKIN. INHALATION: VAPOR AND/OR SPRAY MIST MAY BE HARMFUL IF IN HALED.
VAPOR IRRITATES EYES, NOSE, AND THROAT. REPEATED EXPOSURE TO HIGH VAPOR
CONCENTRATIONS MAY CAUSE IRRITATION OF THE RESPIRATORY SYSTEM AND PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE.
First Aid: INGESTION: IF SWALLOWED, DO NOT INDUCE VOMITING. GENTLY WIPE OUT
INSIDE MOUTH TO REMOVE ANY RESIDUAL MATERIAL. EYE: IN CASE OF EYE CONTACT,
REMOVE CONTACT LENSES AND FLUSH EYES IMMEDIATELY WITH A GE NTLE STREAM OF
LUKE WARM WATER FOR AT LEAST 15 MINS. SKIN: IN CASE OF SKIN CONTACT, FLUSH
IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES FOLLOWED BY WASHING
WITH SOAP AND WATER. INHALATION : IF AFFECTED BY INHALATION OF VAPOR OR
SPRAY MIST, REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION AND OTHER
SUPPORT MEASURES AS REQUIRED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL EQUIPPED
WITH PROPER RESPIRATORY, SKIN, AND EYE PROTECTION SHOULD BE PERMITTED IN THE
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH SAND,
VERMICULITE, OR OTHER NONCOMBUSTIBLE ABSORBENT MATERIAL AND PLACE IN CLEAN,
EMPTY CONTAINERS FOR DISPOSAL. ONLY THE SPILLED MATERIAL AND THE ABSORBENT
SHOULD BE PLACED IN THIS CONTAINER.
Waste Disposal Methods: WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE WITH
FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENT CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WAS TE
MANAGEMENT FACILITY.
Handling And Storage Precautions: DO NOT STORE ABOVE 120 DEGREES F. STORE
LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAMMABLE LIQUIDS.
Other Precautions: VAPORS MAY COLLECT IN LOW AREAS. IF THIS MATERIAL IS PART OF
A MULTIPLE COMPONENT SYSTEM, READ THE MSDS FOR THE OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZA RDS OF
ALL OF ITS PARTS.CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL
OF LIQUIDS IN EX CESS OF A FEW INCHES
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: =15.6C, 60.F
Lower Limits: 1.4
Extinguishing Media: USE NFPA CLASS B EXTINGUISHERS DESIGNED TO EXTINGUISH NFPA
CLASS IB FLAMMABLE LIQUID FIRES.
Fire Fighting Procedures: WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE
USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE
AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZLES ARE PREFERABLE. FIRE-FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS AND FULL-PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard: KEEP THIS PRODUCT AWAY FROM HEAT, SPARKS, FLAME,
AND OTHER SOURCES OF IGNITION. INVISIBLE VAPORS CAN TRAVEL TO A SOURCE OF
IGNITION AND FLASH BACK. DO NOT SMOKE WHILE USING THIS PRODUCT. KEEP CONTA
INERS TIGHTLY CLOSED WHEN NOT IN USE. CLOSED CONTAINERS MAY EXPLODE WHEN
OVERHEATED. DO NOT APPLY TO HOT SURFACES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY ENSURING
PROPER VENTILATION CONTROLS, VAPOR EXHAUST OR FRESH AIR ENTRY. A
NIOSH-APPROVED AIR PURIFYING RESPIRATOR WITH THE APPROPRIATE CHEMICAL
CARTRIDGES O R A POSITIVE-PRESSURE, AIR-SUPPLIED RESPIRATOR MAY ALSO REDUCE
EXPOSURE. READ THE RESPIRATOR MANUFACTURER'S INSTRUCTIONS AND LITERATURE
CAREFULLY .
Ventilation: PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN VOLUME
AND PATTERN TO KEEP THE CONCENTRATION OF INGREDIENTS.
Protective Gloves: NITRILE RUBBER OR POLYETHYLENE
Eye Protection: CHEMICAL-TYPE SPLASH GOGGLES
Other Protective Equipment: CLEAN CONTAMINATED CLOTHING, SHOES AND APRON.
Supplemental Safety and Health: WT/GAL=7.26 RATING: HEALTH=2; FLAMMABILITY=3
NFPA RATING: HEALTH=2; FLAMMABILITY=3
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 180-307 DEGREES F
Vapor Pres: 11.2 MMHG
Vapor Density: >AIR
Spec Gravity: 0.871
Evaporation Rate & Reference: 105 (BUAC=100)
Solubility in Water: 37.6
Appearance and Odor: NON-VISCOUS LIQUID WITH CHARACTERISTIC ODOR
Percent Volatiles by Volume: 100.000
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS,
OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE THE FOLLOWING HAZARDOUS
DECOMPOSITION PRODUCTS WHEN EXPOSED TO EXTREME HEAT:CARBON MONOXIDE;CARBON
DIOXIDE;EXTREME HEAT INCLUDES,BUT IS NOT LIMITED TO,FLAME CUTTING, BRAZING,
AND WELDING.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: AVOID LONG-TERM AND REPEATED CONTACT. THIS PRODUCT
CONTAINS AN ETHYLENE SERIES GLYCOL ETHER AND/OR ACETATE WHICH HAS BEEN SHOWN
TO CAUSE ADVERSE EFFECTS ON THE KIDNEYS, LIVER, BLOOD AND/OR BLOOD-FORMI NG
TISSUE. THIS PRODUCT CONTAINS TOLUENE. TOLUENE INHALATION IN ANIMALS AND
INTENTIONAL INHALATION OF TOLUENE-CONTAINING PRODUCTS BY HUMANS HAS CAUSED
ADVERSE FETAL DEVELOPMENT EFFECTS. ETHYLBENZENE HAS BEEN REPORTED BY NTP TO
CAUSE CANCER IN LABORATORY ANIMALS FOLLOWING A CHRONIC (2 YEAR) INHALATION
EXPOSURE.
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: CHEMICALS ARE LISTED.
Federal Regulatory Information: ALL CHEMICAL SUBSTANCES IN THIS PRODUCT ARE
LISTED ON THE TSCA INVENTORY OR ARE OTHERWISE EXEMPT FROM TSCA INVENTORY
REPORTING REQUIREMENTS.
State Regulatory Information: THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 97-725 THINNER
Assigned IND: Y
Company: PPG INDUSTRIES
Street: 4325 ROSANNA DR
City: ALLISON PARK PA
Zipcode: 15101
Health Emergency Phone: 304-843-1300
Label Required IND: Y
Date Of Label Review: 07/11/2001
Status Code: A
Origination Code: G
Hazard And Precautions: INGESTION: HARMFUL IF SWALLOWED. EYE: CAUSES SEVERE
EYE IRRITATION. SKIN: CAUSES PRIMARY SKIN IRRITATION. MAY BE ABSORBED
THROUGH THE SKIN. INHALATION: VAPOR AND/OR SPRAY MIST MAY BE HARMFUL IF IN
HALED. VAPOR IRRITATES EYES, NOSE, AND THROAT. REPEATED EXPOSURE TO HIGH
VAPOR CONCENTRATIONS MAY CAUSE IRRITATION OF THE RESPIRATORY SYSTEM AND
PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
631-914, ELECTRONIC SOLV (BULK FORMULATED)
| |
|
SCATTER GRANULAR ODOR COUNTERACTANT
| |
|
3053-53, ANALYSIS: REAGENT PILLOWS FOR BROMINE/CHLORINE
| |
|
SIERRA ANTIFREEZE-COOLANT
| |
|
71-110 METALSIDE PASTEL BASE
| 107-21-1
1314-13-2
13463-67-7
14808-60-7
29911-28-2 |
|
RENE' N-4
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7440-33-7
7440-25-7 |
|
RENE' N-4+
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7440-33-7
7440-25-7 |
|
RENE' N-5
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-33-7
7440-25-7
7439-98-7 |
|
RENE' N-6
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-33-7
7440-25-7 |
|
RENE' 142
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-33-7
7440-25-7
7439-98-7
7440-58-6 |
|
97-725 THINNER
| 100-41-4
108-88-3
1330-20-7
2807-30-9
67-63-0 |
|
97-726 HIGH FLASH NAPTHA
| 25551-13-7
64742-48-9
64742-95-6
95-63-6 |
|
PENAIR M-5704A
| |
|
THIOKOL MC-236 CLASS B BASE
| |
|
WB EPOXY 850 PART A, P25V00100
| |
|
22538, AMINO ACID F REAGENT (SEE SUPPL)
| |
|
UNIVER 3 HARDNESS REAGENT, #962
| 497-19-8
7757-83-7
12125-02-9
14402-88-1 |
|
862, THERMOCOUPLE ALLOYS (3% TUNGSTEN)
| 7440-33-7 |
|
LTSA-35A (QPL BLEND)
| |
|
PRELUBE 6
| |
|
BORA-CARE
| |
|
IMPERIAL 2135TH, (SEE SUPPL)
| |
|
NP-6000/7000/8000 SERIES TONER BLACK(SEE SUPPL)
| |
|
"VERTREL" MCA PLUS; KCD-9546
| 138495-42-8
156-60-5
287-92-3
75-83-2 |
|
DOW CORNING 732 MULTI PURPOSE SEALANT, CLEAR
| 4253-34-3
17689-77-9
7631-86-9 |
|
602722-00, MOBIL DTE 15M
| |
|
MG0554PL, MG055422, MAG I ALL FLEET SAE 15W40 (SEE SUPPL)
| |
|
CHROMIUM ALLOYED STEEL CASTINGS
| 7440-44-0
7440-47-3
1309-37-1
7439-96-5
7439-98-7
7440-02-0
7440-21-3
7704-34-9
7440-33-7
7440-62-2 |
|
ENERGIZER, ENERGIZER E2, INDUSTRIAL ZMA; HERCULES
| 7782-42-5
1313-13-9
1310-58-3
7440-66-6 |
|
CHEM-LOC 101, DUST CONTROL AGENT
| |
|
0315-1, ULTRA PREP ULTRA-LOW RESIDUE HANDWIPE AGENT
| |
|
DOW CORNING 795 SILICONE BUILDING SEALANT, GRAY
| 112945-52-5
1185-55-3 |
|
HP 4500 PHOTOPRECISE TONER - YELLOW (SEE SUPPL)
| |
|
SEALED LEAD ACID BATTERY
| 7664-93-9
9003-07-0
65997-17-3
7439-92-1 |
|
03386, BRAKE FLUID 1000
| |
|
CLEAN AND SHEEN
| 74-98-6
106-97-8 |
|
VV-L-800C LUBRICATING OIL,GENERAL PURPOSE PRESERVATIVE
| 61790-48-5
64741-88-4
64742-53-6
68608-26-4 |
|
HEMATOXYLIN SOLUTION GILL NO 3, GHS-3, COMPONENT OF 91-6
| |
|
SEALED LEAD ACID BATTERY
| 7664-93-9
9003-07-0
65997-17-3
7439-92-1 |
|
HYDRAULIC FLUID, PETROLEUM BASE ISO 32
| |
|
QUICK START STARTING FLUID CYLINDER (SEE SUPPL)
| |
|
NEW II (MIL-PRF-680, TYPE II) ENVIRONMENTALLY PREFERRED PART
| |
|
34/78-1050, ENGINE STARTING BATTERIES (GROUP 34)
| 7664-93-9
9003-07-0
65997-17-3
7439-92-1 |
|
MIL-P-46002B GRADE 1
| |
|
0296-01, ELECTRON
| |
|
GLASS & WINDOW CLEANER
| 74-98-6
106-97-8
111-76-2
7664-41-7
7732-18-5 |
|
CHEMICAL #1
| |
|
CHEMICAL #2
| |
|
CHEMICAL #3
| |
|
AAF44-12,32 AUTOPRIDE DOT 3 STANDARD HEAVY DUTY BRAKE FLUID
| |
|
|