3M GENERAL OFFICES -- SPRAY BOND (TM) ADHESIVE 6111 GREEN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLPQZ
MSDS NAME: SPRAY BOND (TM) ADHESIVE 6111 GREEN
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 651-737-6501/1-800-364-3577
Emergency Phone Number: 800-364-3577
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: 3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 800-364-3577/651-737-6501(24 HOURS)
=======================================================
Ingredients
=======================================================
Cas: 29160-13-2
Name: POLYOLEFIN COPOLYMER
% low Wt: 45.
% high Wt: 55.
-----------------------------
Name: HYDROCARBON RESIN - TRADE SECRET
% low Wt: 20.
% high Wt: 30.
-----------------------------
Cas: 9003-07-0
RTECS #: UD1842000
Name: POLYPROPYLENE
% low Wt: 15.
% high Wt: 25.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Effects of Exposure: NO EXPOSURE LIMITS GIVEN. EYE: VAPORS OF HEATED RESIN MAY
CAUSE IRRITATION. SKIN: BURNS (THERMAL, FROM CONTACT WITH HOT MATERIAL);
BURNING PAIN. RED AND SWOLLEN SKIN AND BLISTERS. PROLONGED/REPEATED E XPOSURE
MAY CAUSE: MILD SKIN IRRITATION: SREDNESS, SWELLING AND ITCHING. INHALATION:
VAPORS OF HEATED MATERIAL MAY CAUSE RESPIRATORY SYSTEM IRRITATION. INGESTION:
PRACTICALLY NON-TOXIC
First Aid: EYE: FLUSH W/WATER FOR 15 MINS. SKIN: IMMEDIATELY FLUSH AFFECTED
AREA WITH LARGE AMOUNTS OF WATER AND COVER WITH A CLEAN DRESSING. DO NOT
ATTEMPT TO REMOVE ADHESIVE. HAVE BURN TREATED BY PHYSICIAN. IN HALATION:
REMOVE TO FRESH AIR. INGESTION: DRINK TWO GLASSES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: OBSERVE PRECAUTIONS FROM OTHER SECTIONS, COLLECT
SPILLED MATERIAL.
Waste Disposal Methods: DISPOSE OF WASTE PRODUCT IN A SANITARY LANDFILL.
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Handling And Storage Precautions: STORE AT TEMPERATURE BEOW 120F. KEEP OUT OF
REACH OF CHILDREN
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: N/D
Autoignition Temp Text: N/D
Extinguishing Media: DRY CHEMICAL, FOAM, CARBON DIOXIDE, WATER
Fire Fighting Procedures: WEAR FULL PROTECTIVE CLOTHING, INCLUDING HELMET, SELF
CONTAINED POSITIVE PRESSURE OR PRESSURE DEMAND BREATHING APPARATUS, BUNKER
COAT AND PANTS, BANDS AROUND ARMS, WAIST AND LEGS, FACE MASK, AND PROTE CTIVE
COVERING FOR EXPOSED AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard: NONE KNOWN
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID PROLONED BREATHING OF VAPORS
Ventilation: USE WITH LOCAL VENTILATION; FOR MOLTEN OR EXTRUDED MATERIAL
Protective Gloves: NOMEX, TO PREVENT THERMAL BURNS
Eye Protection: SAFETY GLASSES WITH SIDE SHIELDS
Work Hygienic Practices: AVOID EYE/SKIN CONTACT WITH HOT ADHESIVE AND
APPLICATOR TIP. DO NOT INGEST.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: N/D
Spec Gravity: 0.920
PH: N/D
VOC Grams/Liter: 6
Solubility in Water: NIL
Appearance and Odor: SOLID, GREEN, NO ODOR
Percent Volatiles by Volume: 0.00
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE
Materials To Avoid: NONE
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, OXIDES OF
NITROGEN
Hazardous Polymerization Indicator: NO
=======================================================
Ecological Information
=======================================================
Ecological: NO DATA AVAILABLE
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: VOC: 6.2 GMS/LITER TESTED PER EPA METHOD 24 @
191 C. VOC LESS H2O EXEMPT SOLVENTS: N/D, VOC: N/D. SINCE REGULATIONS VARY,
CONSULT APPLICABLE REGULATIONS OR AUTHORITIES BEFORE DISPOSAL. IN THE EVENT O
F AN UNCONTROLLED RELEASE OF THIS MATERIAL, USER SHOULD DETERMINE IF THE
RELEASE QUALIFIED AS REPORTABLE QUANTITY. FIRE HAZARD - NO, PRESSURE - NO,
REACTIVITY - NO, ACUTE - YES, CHRONIC -NO
=======================================================
Other Information
=======================================================
Other Information: HEALTH: 1 FIRE: 0 REACTIVITY: 0 PERSONAL PROTECTION:NONE.
THE INFORMATION IN THIS MSDS IS BELIEVED TO BE CORRECT AS OF THE DATE
ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BU T NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. USER IS
RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT FOR A PARTICULAR
PURPOSE AND SUITABLE FOR USERS METHOD OF USE OR APPLICATION. 3M MAKES NO
REPRESENTATION AS TO ITS COMPLETENESS OR ACCURACY.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SPRAY BOND (TM) ADHESIVE 6111 GREEN
Company: 3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 800-364-3577
Label Required IND: Y
Date Of Label Review: 11/01/2001
Status Code: A
Origination Code: G
Hazard And Precautions: NO EXPOSURE LIMITS GIVEN. EYE: VAPORS OF HEATED RESIN
MAY CAUSE IRRITATION. SKIN: BURNS (THERMAL, FROM CONTACT WITH HOT MATERIAL);
BURNING PAIN. RED AND SWOLLEN SKIN AND BLISTERS. PROLONGED/REPEATED E XPOSURE
MAY CAUSE: MILD SKIN IRRITATION: SREDNESS, SWELLING AND ITCHING. INHALATION:
VAPORS OF HEATED MATERIAL MAY CAUSE RESPIRATORY SYSTEM IRRITATION. INGESTION:
PRACTICALLY NON-TOXIC
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.