3M INDUSTRIAL TAPE AND SPECIAL -- SCOTCH-WELD DP-110 B/A PART B GRAY EPOXY ADHE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLPRN
MSDS NAME: SCOTCH-WELD DP-110 B/A PART B GRAY EPOXY ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M INDUSTRIAL TAPE AND SPECIALITIES DIVISION
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 800-364-3577/651-737-6501
Emergency Phone Number: 651-737-6501
Resp. Party Other MSDS No.: 11-3322-2
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: 3M
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Phone: 800-364-3577
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONTACT: MODERATE EYE IRRITATION: SIGNS / SYMPTOMS CAN
INCLUDE REDNESS, SWELLING, PAIN, TEARING, AND HAZY VISION. VAPORS FROM HEATED
MATERIAL MAY CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRI NDING,
SANDING, OR MACHINING MAY CAUSE EYE IRRITATION. SKIN CONTACT: ALLERGIC SKIN
REACTION: SIGNS / SYMPTOMS CAN INCLUDE REDNESS, SWELLING, BLISTERING, AND
ITCHING. MILD SKIN IRRITATION: SIGNS / SY MPTOMS CAN INCLUDE REDNESS,
SWELLING, AND ITCHING. INHALATION: IRRITATION (UPPER RESPIRATORY): SIGNS /
SYMPTOMS CAN INCLUDE SORENESS OF NOSE AND THROAT, COUGHING AND SNEEZING.
VAPORS OF HEATED MATERI AL (SIGNS AND SYMPTOMS OF OVEREXPOSURE)
Signs And Symptions Of Overexposure: HEALTH HAZARDS ACUTE AND CHRONIC (CONT):
MAY CAUSE RESPIRATORY SYSTEM IRRITATION. DUST FROM CUTTING, GRINDING, SANDING
OR MACHINING MAY CAUSE IRRITATION OF THE RESPIRATORY SYSTEM. IF SWALLOWED:
INGES TION MAY CAUSE: IRRITATION OF GASTROINTESTINAL TISSUES: SIGNS/SYMPTOMS
CAN INCLUDE PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS,
AND BLOOD IN FECES. OTHER HEALTH HAZARD INFORMATION: EXPOSURE TO THIS
MATERIAL IN NORMAL STORAGE AND HANDLING HAS NOT BEEN REPORTED TO CAUSE
SIGNIFICANT ADVERSE HEALTH EFFECTS. HOWEVER, UNDER NORMAL PROCESSING
CONDITIONS, EG. GRINDING OR HEATING, THIS PRODUCT MAY RELEASE (TOXICOLOGICAL
INFO)
First Aid: EYE CONTACT: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER. GET
IMMEDIATE MEDICAL ATTENTION. SKIN CONTACT: IMMEDIATELY WASH SKIN WITH SOAP
AND LARGE AMOUNTS OF WATER. REMOVE CONTAMINATED CLOTHIN G. IF SIGNS /
SYMPTOMS OCCUR, CALL A PHYSICIAN. WASH CONTAMINATED CLOTHING BEFORE REUSE AND
DISPOSE OF CONTAMINATED SHOES. INHALATION: IF SIGNS / SYMPTOMS OCCUR, REMOVE
TO FRESH AIR. IF SIGNS / SYMPT OMS CONTINUE, CALL A PHYSICIAN. IF SWALLOWED:
DO NOT INDUCE VOMITING. DRINK TWO GLASSES OF WATER. CALL A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFORMATION
REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY PROTECTION, VENTILATION,
AND PERSONAL PROTECTIVE EQUIPMENT. COVER WITH ABSORBENT MATERIAL. COLLE CT
SPILLED MATERIAL. PLACE IN A U.S. DOT-APPROVED CONTAINER.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL INCINERATOR. DISPOSE
OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A SANITARY LANDFILL. SIN
CE REGULATIONS VARY, CONSULT APPLICABLE REGULATIONS OR AUTHORITIES BEFORE
DISPOSAL. U.S. EPA HAZAR DOUS WASTE NUMBER: NONE. (NOT U.S. EPA HAZARDOUS).
Handling And Storage Precautions: AVOID EYE CONTACT. AVOID SKIN CONTACT. WEAR
APPROPRIATE GLOVES WHEN HANDLING THIS MATERIAL. USE IN A WELL-VENTILATED
AREA. AVOID BREATHING OF VAPORS CREATED DURING THE CURE CYCLE. AVOID
BREATHING OF D UST CREATED BY CUTTING, SANDING OR GRINDING. DO NOT EAT, DRINK
OR SMOKE WHEN (OTHER PRECAUTIONS)
Other Precautions: DO NOT CURE UP A MASS OF COMBINED MATERIAL LARGER THAN 50
GRAMS TO PREVENT THE POSSIBILITY OF EXOTHERM. HANDLING AND STORAGE
PRECAUTIONS (CONT): USING THIS PRODUCT. DO NOT INGEST. KEEP CONTAIN ER
TIGHTLY CLOSED. RECOMMENDED STORAGE: STORE AWAY FROM HEAT. KEEP OUT OF REACH
OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >93.3C, 200.F
Autoignition Temp Text: N/D
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR FULL PROTECTIVE CLOTHING, INCLUDING HELMET,
SELF-CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND BREATHING APPARATUS
(NIOSH APPROVED - FP N), BUNKER COAT AND PANTS, BANDS AROUND ARMS, WAIST AND
L EGS, FACE MASK, AND PROTECTIVE COVERING FOR EXPOSED AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard: NONE KNOWN. FIRE AND EXPLOSION AVOIDANCE:
KEEP CONTAINER TIGHTLY CLOSED. NFPA HAZARD CODES: HEALTH: 2. FIRE: 0.
REACTIVITY: 1. UNUSUAL REACTION HAZARD: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF EXHAUST VENTILATION IS NOT ADEQUATE, USE APPROPRIATE
RESPIRATORY PROTECTION. SELECT ONE OF THE FOLLOWING NIOSH APPROVED
RESPIRATORS BASED ON AIRBORNE CONCENTRATIONS OF CONTAMINANTS AND IN ACCORDANC
E WITH OSHA REGULATIONS: HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROPRIATE LOCAL EXHAUST FOR GRINDING, CUTTING OR SANDING
CURED MATERIAL. CURING OVENS MUST BE EXHAUSTED TO OUTDOORS OR (SUPPLEMENTAL
SAFETY & HEALTH)
Protective Gloves: GLOVES MADE FROM: POLYETHYLENE / ETHYLENE VINYL ALCOHOL ARE
RECOMMENDED.
Eye Protection: VENTED GOGGLES. SAFETY GLASSES WITH SIDE SHIELDS. (BOTH ANSI
APPROVED - FP N)
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK, OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. DO NOT INGEST. WASH
CONTAMINATED CLOTHING BEFORE REUSE AND DISPOSE OF CONTAMINATED SHOES.
Supplemental Safety and Health: N/P. VENTILATION (CONT): TO A SUITABLE
EMISSION CONTROL DEVICE.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: NOT DETERMINED
Spec Gravity: 1.140 (WATER=1)
PH: NOT DETERMINED
Viscosity: 40000.0-70000.0CENTIPOISE
Solubility in Water: NIL.
Appearance and Odor: CREAM PASTE, WHITE, VERY SLIGHT ODOR
Percent Volatiles by Volume: 0.00% BY WT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT. HEAT IS GENERATED DURING CURE. DO NOT CURE
A MASS LARGER THAN 50 GRAMS IN A CONFINED SPACE TO PREVENT A PREMATURE
REACTION (EXOTHERM) WITH PRODUCTION OF INTENSE HEAT AND SMOKE.
Materials To Avoid: STRONG ACIDS, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE,
ALDEHYDES, KETONES, HYDROCARBONS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: N/P. SIGNS AND SYMPTOMS OF OVEREXPOSURE
(CONT): FUMES AND VAPORS OF VARIABLE COMPOSITION BASED ON SPECIFIC PROCESS
CONDITIONS. THESE PROCESS RELEASES MAY PRODUCE IRRITATION OR ANY OF THE
HEALTH EFFECTS LISTED ABOVE WHEN THE EMISSIONS ARE PRESENT AT ELEVATED
CONCENTRATIONS. USE WITH APPROPRIATE LOCAL EXHAUST VENTILATION.
=======================================================
Ecological Information
=======================================================
Ecological: ENVIRONMENTAL DATA: NOT DETERMINED.
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: EPCRA HAZARD CLASS: FIRE HAZARD: NO. PRESSURE: NO.
REACTIVITY: NO. ACUTE: YES. CHRONIC: YES.
Federal Regulatory Information: VOLATILE ORGANIC COMPOUNDS: 0.0 GMS/LITER SOUTH
COAST AIR MGMT DIST METHOD RULE 443.1, CALCULATED. VOC LESS H2*0 &
EXEMPT SOLVENTS: 0.0 GMS/LITER SOUTH COAST AIR MGMT DIST METHOD RULE 443.1
CALCUL ATED.
=======================================================
Other Information
=======================================================
Other Information: SUPERCEDES: NOVEMBER 25, 1997. THIS PRODUCT IS PART B OF A
MULTIPART PRODUCT WHICH CONSISTS OF MULTIPLE, INDEPENDENTLY PACKAGED
COMPONENTS. FOR THE MSDS FOR PART A OF THIS PRODUCT, SEE 3M DOCUMENT
NUMBER: 11-3323-0. THE 3M DOCUMENT NUMBER FOR THE MULTIPART PRODUCT IS :
11-3324-8. ID NUMBER/U.P.C FOR THE MULTIPART PRODUCT: 62-3533-1434-7,
00-21200-82470-8, 62-3533-1436-2, 62-3533-2530-1, 00-2 1200-83763-0,
62-3533-3530-0, 00-21200-87275-4, 62-3533-9830-4, 00-21200-87274-1, 62-3533-
3835-3, 62-3533-9931-4, 00-21200-83473-8.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-110 B/A PART B GRAY EPOXY ADHESIVE
Company: 3M
Street: 3M CENTER
City: ST. PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 651-737-6501
Label Required IND: Y
Date Of Label Review: 11/01/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: Slight
Hazard And Precautions: ACUTE: EYE CONTACT MAY CAUSE MODERATE EYE IRRITATION,
REDNESS, SWELLING, PAIN, TEARING, AND HAZY VISION. VAPORS FROM HEATED
MATERIAL AND DUST CREATED BY CUTTING, GRINDING, SANDING, OR MACHINING MAY CA
USE EYE IRRITATION. SKIN CONTACT MAY CAUSE MILD SKIN IRRITATION, ALLERGIC
SKIN REACTION, REDNESS, SWELLING, BLISTERING, AND ITCHING. INHALATION MAY
CAUSE UPPER RESPIRATORY IRRITATION, SORENESS OF NO SE AND THROAT, COUGHING
AND SNEEZING. VAPORS AND DUST MAY CAUSE IRRITATION. INGESTION CAN CAUSE
GASTROINTESTINAL IRRITATION, PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA,
BLOOD IN VOMITUS AND BLOOD I N FECES. CHRONIC: MAY CAUSE ALLERGIC SKIN
REACTION
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
800, HAI-800 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
750, HAI-X750 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
601, HAI-601 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
600, HAI-600 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
BEST TEST PAPER CEMENT, (SEE SUPPLEMENTAL)
| 142-82-5
9006-04-6 |
|
541, HAI-WELD NICR 80 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
528, HAI-NICR 40 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
527, HAI-NICR 35 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
525, HAI-NICR 35B ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
520, HAI-NICR 35CB ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
506, HAI-WELD 506 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
441, HAI-5676 ALLOY
| 7440-47-3
7440-02-0 |
|
026, HAI-HPX ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
021, HAI-XPX ALLOY
| 7440-47-3
7440-02-0 |
|
057, HAI-NICR 350X ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0 |
|
066, HAI-66 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
111, HAI-KPOX ALLOY
| 7440-47-3
7440-02-0 |
|
007, HAI-NICR 60 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
542, HAI-NICR 80LA ALLOY
| 7440-47-3
7439-96-5
7440-02-0 |
|
722, HAI-WELD 62 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
302, HAI-302SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
250, HAI-NICR 80F ALLOY
| 7440-47-3
7439-96-5
7440-02-0 |
|
431, HAI-431 ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
305, HAI-305SS ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
309, HAI-309SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
304, HAI-304SS ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
248, HAI-NICR 80AA ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
246, HAI-NICR 70 ALLOY
| 7440-47-3
7439-89-6
7440-02-0
7440-21-3 |
|
347, HAI-347SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
316, HAI-316SS ALLOY
| 7440-47-3
7440-02-0 |
|
332, HAI-332CBSS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
330, HAI-330SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
310, HAI-310SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0 |
|
314, HAI-314SS ALLOY
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3 |
|
120, HAI-KPTP ALLOY
| 7440-47-3
7440-02-0 |
|
121, HAI-KP ALLOY
| 7440-47-3
7440-02-0 |
|
123, HAI-EP ALLOY
| 7440-47-3
7440-02-0 |
|
126, HAI-NP ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
241, HAI-NICR 80 ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
242, HAI-NICR 80CB ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
245, HAI-NICR 80AL ALLOY
| 7440-47-3
7440-02-0
7440-21-3 |
|
PHILLYCLAD 1775/620TS HARDENER, 3461H
| |
|
INTERNAL STANDARD MIXTURE, STM-341N
| 67-56-1
3114-55-4
3855-82-1
540-36-3
363-72-4 |
|
MAGENTA TONER CARTRIDGE, 12A1451
| 114803-11-1
5281-04-9
9010-79-1
7631-86-9
68909-20-6 |
|
SPRAY BOND (TM) ADHESIVE 6111 GREEN
| 29160-13-2
9003-07-0 |
|
SCOTCH-WELD DP-110 B/A PART B GRAY EPOXY ADHESIVE
| |
|
60/40 ROSIN CORE WIRE SOLDER
| |
|
CLEAR RTV SILICONE ADHESIVE SEALANT
| 63148-62-9
112945-52-5
17689-77-9
4253-34-3
64-19-7 |
|
MILPRF85285C(MILC85285B) TYPE I, 03W127ACAT17925
| 3779-63-3
822-06-0
64742-95-6
123-86-4
107-87-9
763-69-9
1119-40-0
627-93-0
106-65-0 |
|
METREGRIP 303 ACTIVATOR
| |
|
|