DBA PRODUCTS COMPANY INC -- PRO-PLUG BALL PLUGGING HARDENER, 160321
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BKRZW
MSDS NAME: PRO-PLUG BALL PLUGGING HARDENER, 160321
Responsible Party
Name: DBA PRODUCTS COMPANY INC
Address: 22 SKOKIE HIGHWAY
City: LAKE BLUFF IL 60044
Info Phone: 708-234-8100
Emergency Phone Number: 708-234-8100
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: D B A PRODUCTS CO INC
Address: 22 SKOKIE HIGHWAY
City: LAKE BLUFF IL 60044-1711
Phone: 312-234-8100
Name: DBA PRODUCTS COMPANY, INC
Address: UNKNOWN
City: UNKNOWN NK 00000
Phone: UNKNOWN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST:SINGLE DOSE LD50 IS UNKNOWN. SINGLE DOSE ORAL TOX
IS EXPECTED TO BE LOW. INHAL:NO GUIDE FOR CONTROL ESTABLISHED. NOT LIKELY TO
BE A PROB AT ROOM TEMP. SINGLE EXPOS TO VAP IS NOT LIKELY TO BE HA Z.
MINIMIZE INHAL OF VAP. EYE:MAY CAUSEMODERATE EYE IRRIT & TRANSIENT
CORNEAL INJURY. SKIN:A (SEE EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:SINGLE PRLNGD SKIN EXPOS IS NOT
LIKELY TO RSLT IN ABSORBTION OF HARMFUL AMT. THE DERMAL LD50 IS UNKNOWN.
PRLNGD/RPTD EXPOS MAY CAUSE SKIN IRRIT. MAY CAUSE SKIN SENSIT. NOTE:THIS PROD
IS A "MI X" FOR WHICH NO HLTH HAZ DATA EXIST. THE HCS REQUIRES THAT SUCH
"MIX" ASSUME TO PRESENT THE SAME HLTH (SEE SUPP DATA)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INGEST:DO NOT INDUCE VOM. GIVE LGE AMTS OF MILK/WATER. TRANSPORT TO
MED FACILITY. (NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERS.) INHAL:REMOVE
TO FRESH AIR IF EFFECT OCCURS. CALL MD. NOTE TO MD:NO SP ECIFIC ANTIDOTE.
SUPPORTIVE CARE. ANY TREATMENT THAT MIGHT BE REQD FOR OVEREXPOS SHOULD BE
DIRECTED AT THE CONTROL OF SYMP & THE CLINICAL CNDTNS. EYE:IRRIGATE IMMED
W/WATER FOR AT (SEE SUPP DATA)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: USE NIOSH/MSHA APPRVD RESP/EYE/HAND/BODY PROT APPROP
FOR THE SIZE OF SPILL & THE EXPOS ENCOUNTERED. FOR LGE SPILLS, DIKE &
CONTAIN SPILL USING AN INERT ABSORB (SAND/EARTH/SAWDUST) & COLLECT IN
SUITABL E CONTRS FOR PROPER DISP. RESIDUAL (SEEINGRED 4)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE IN ACCORDANCE W/FEDERAL, STATE & LOCAL
REGULATIONS. RCRA:AS PRODUCED THIS PRODUCT IS NOT A WASTE. IF DISCARDED AS
IS, IT IS NOT CLASSIFIED A HAZARDOUS WASTE UNDER RCRA.
Handling And Storage Precautions: PERIODS OF EXPOS TO HIGH TEMPS SHOULD BE
MINIMIZED. AVOID BRTHG VAP/MIST. KEEP CONTRS TIGHTLY CLOSED WHEN NOT IN USE.
STORE IN COOL DRY LOCATION.
Other Precautions: PROT FROM MOISTURE CONTAM WHICH MAY CAUSE AN EXOTHERMIC
GENERATION OF CO*2 & A DANGEROUS PRESS BUILDUP. DO NOT TAKE INTERNALLY.
CLOSE CONTAINER AFTER EACH USE. EMPTY CONTAINERS MUST NOT BE WASHED & RE
-USED FOR ANY PURPOSE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >200F,>93C
Extinguishing Media: USE FIRE EXTINGUISHER DESIGNED TO EXTINGUISH COMBUSTIBLE
LIQUID FIRES (CO*2, ALL PURPOSE DRY CHEMICAL OR FOAM).
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIPMENT
(FP N). WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL EXPOSED CONTR TO
PVNT PRESS BUILD-UP (SEE SUPP DATA)
Unusual Fire/Explosion Hazard: DURING EMERGENCY CONDITIONS OVEREXPOSURE TO
DECOMP PRODUCT MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
APPARENT. OBTAIN MED ATTENTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED POSITIVE PRESSURE AIR-SUPPLIED
RESPIRATOR. NIOSH SCHEDULE TC19C. REFER TO OSHA 29CFR 1910.134 "RESPIRATORY
PROTECTION".
Ventilation: MECHANICAL PREFERRED.
Protective Gloves: IMPERMEABLE GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYE WASH FACILITY, SAFETY SHOWER. AS REQUIRED TO
PROTECT & PREVENT SKIN CONTACT.
Work Hygienic Practices: WASH THORO W/SOAP & WATER AFTER USE. USE SUGGESTED
PROT EQUIP.
Supplemental Safety and Health: FIRE FIGHT PROC:& POSS AUTO-IGNIT/EXPLOS
WHEN EXPOSED TO EXTREME HEAT. CNDTNS (POLYM):W/AN EPOXY RESIN IN MASSES OF 1
LB OR MORE OF PROD IRREVERSIBLE POLYM WILL OCCUR PRDCEING CONSIDERABLE HEAT
BUILDU P. EFTS OF OVEREXP:HAZ AS DO COMPONENTSTHAT CONSTITUTE AT LEAST 1% OF
THE "MIX". FIRST AID PROC:LEAST 30 (SEE INGRED 2)
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Spec Gravity: 0.97
Solubility in Water: SLIGHTLY SOLUBLE
Appearance and Odor: LIGHT YELLOW LIQUID, W/AN AMINE ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STABLE UNDER NORMAL CONDITIONS.
Materials To Avoid: ACID, CHLORINATED HYDROCARBONS & STRONG BASES.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, ALDEHYDES,
NIROGEN OXIDES & AMMONIA.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR BY ITSELF. KEEP AWAY FROM
HEAT/SPARK/FLAME. AVOID HIGH TEMP/HIGH HUMIDITY. WHEN COMBINED (SEE SUPP
DATA)
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 21578
MSDS NAME: PRO-PLUG BALL PLUGGING HARDENER, 160321
MSDS Prepared Date: 01/04/1991
Review Date: 10/10/1991
Multiple KIT Number: 0
Review IND: Y
Additional Data: NOT REGULATED FOR TRANSPORTATION
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PRO-PLUG BALL PLUGGING HARDENER, 160321
Assigned IND: Y
Company: DBA PRODUCTS COMPANY, INC
Street: UNKNOWN
City: UNKNOWN NK
Zipcode: 00000
Health Emergency Phone: 708-234-8100
Label Required IND: Y
Date Of Label Review: 08/20/1991
Status Code: C
Label Date: 08/20/1991
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: Slight
Hazard And Precautions: ACUTE: MAY CAUSE EYE/SKIN/RESPIRATORY IRRITATION. AVOID
CONTACT WITH EYE, SKIN AND CLOTHING. AVOID BREATHING VAPORS. KEEP CONTAINER
CLOSED. USE WITH ADEQUATE VENTILATION. COMBUSTIBLE: KEEP AWAY FROM H EAT AND
FLAME. AVOID HIGH TEMPERATURE, HIGH HUMIDITY AND EPOXY RESINS.
CHRONIC:PROLONGED/REPEATED EXPOSURE MAY CAUSE SKIN IRRITATION/SENSITIZATION
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|