3M GENERAL OFFICES -- SCOTCH-WELD 3532 B/A PART B URETHANE ADHESIVE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BTQRD
MSDS NAME: SCOTCH-WELD 3532 B/A PART B URETHANE ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE: MODERATE EYE IRRIT: SIGNS/SYMPTOMS CAN INCLUDE
REDNESS, SWELLING, PAIN, TEARING, AND HAZY VISION. SKIN: MILD SKIN IRRIT
(AFTER PROLONGED OR REPEATED CONTACT): SIGNS/SYMPTOMS CAN INCLUDE REDNESS,
SWELLING, AND ITCHING. INHAL: IRRIT (UPPER RESP): SIGNS/SYMPTOMS CAN INCLUDE
SORENESS OF THE NOSE & (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: THROAT, COUGHING & SNEEZING.
VAPS OF HEATED MATL MAY CAUSE RESP SYSTEM IRRIT. DUST FROM CUTTING, GRINDING,
SANDING OR MACHING MAY CAUSE IRRITATION OF RESPIRATORY SYSTEM. INGEST MAY
CAUSE IRR IT OF GI TISSUE. SIGNS/SYMPTOMS CAN INCLUDE PAIN, VOMIT, ABDOM
TENDERNESS, NAUS, BLOOD IN VOMITUS, & BLOOD (SUPP DATA)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE: IMMED FLUSH EYES WITH LARGE AMOUNTS OF WATER. GET IMMED MED
ATTN. SKIN: FLUSH W/LARGE AMOUNTS OF WATER. IF IRRIT PERSISTS, GET MEDICAL
ATTN. INHAL: IF SIGNS/SYMPTOMS OCCUR, REMOVE PERSON TO FRESH AIR. IF
SIGNS/SYMPTOMS CONTINUE, CALL MD. INGEST: DO NOT INDUCE VOMITING. DRINK TWO
GLASSES OF WATER. CALL A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFO
REGARDING PHYSICAL AND HEALTH HAZARDS, RESP PROT, VENT, & PERSONAL PROT
EQUIP. CALL (612) 733-1110 OR (612) 733-6100 FOR 24-HR SPILL ASSISTANCE.
COVER W/A BSORB MATL. COLLECT SPILLED MATL. PLACE
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCINERATE IN
AN INDUST/COMMERCIAL FACILITY IN THE PRESENCE OF A COMBUSTIBLE MATL. DISP OF
COMPLETELY CURED (OR POLYMERIZED) MATL IN A SANITARY LANDFILL. DISP OF WASTE
PROD IN A FACILITY PERMITED TO
Handling And Storage Precautions: DO NOT INGEST. STORE AT TEMPS < 120F
(49C). KEEP CNTNR CLSD WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. KEEP
CNTNR TIGHTLY CLOSED.
Other Precautions: WHEN THIS PART B IS USED IN COMBINATION WITH PART A (NO.
3532) FOLLOW THE PRECS OUTLINED IN THE PART A (NO 3532) MSDS. WHEN GRINDING
OR SANDING THE CURED MATL FOLLOW THE RECOMMENDED PRECS FOR VENT & R ESP
PROT FOR DUSTS GIVEN FOR
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID INHAL OF VAPS CREATED DURING THE CURE CYCLE.
AVOID INHAL OF DUST CREATED BY CUTTING, SANDING/GRINDING. USE NIOSH/MSHA
APPROVED HALF-MASK DUST RESP BASED ON CONTAMS & I/A/W OSHA REGS.
Ventilation: USE IN A WELL VENT AREA. PROVIDE SUFFICIENT VENT TO MAINTAIN
EMISSIONS BELOW RECOMMENDED EXPOSURE LIMITS. IF
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL
Eye Protection: ANSI APPRVD CHEM WORKER GOGGLES (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF THE "L" VERSION CONSULT "LR" VERSION
FOR ADDN INFO (FP N). EFTS OF OVEREXP:IN FECES. OTHER HLTH HAZ INFO:ING 7
(PRESENT AT A LEVEL <0.5%) HAS BEEN SHOWN TO BE WEAKLY TUMORIGENIC IN MICE
BY CH RONIC RECURRENT APPLIC TO SKIN. RELEVANCE OF THESE FINDINGS TO MAN
UNKNOWN.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: T6
Spec Gravity: 1.310 (H2O=1)
Solubility in Water: VERY SLIGHT
Appearance and Odor: VISCOUS LIQUID, OFF-WHITE, POLYESTER ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE KNOWN.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE, OXIDES OF
NITROGEN, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD 3532 B/A PART B URETHANE ADHESIVE
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 01/11/1994
Status Code: C
Label Date: 01/11/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYE:MODERATE IRRIT, REDNESS, SWELLING, PAIN,
TEARING, HAZY VISION. SKIN:MILD SKIN IRRIT (AFTER PROLONGED OR REPEATED
CONTACT) REDNESS, SWELLING, AND ITCHING. INHAL: IRRIT, SORENESS OF THE NOSE
& THROAT, COUGHING & SNEEZING. VAPORS OF HEATED MATL/DUST. MAY CAUSE
IRRITATION OF RESPIRATORY SYSTEM. INGEST MAY CAUSE IRRITATION OF GI TISSUE,
PAIN, VOMITING, ABDOMIN TENDERNESS, NAUS, BLOOD IN VOMI TUS & FECES.
CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|