3M GENERAL OFFICE -- STAMARK HIGH PERFORMANCE 370
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWBFX
MSDS NAME: STAMARK HIGH PERFORMANCE 370
Responsible Party
Name: 3M GENERAL OFFICE
Address: 3M CENTER
City: ST PAUL MN 55144-1110
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 65997-17-3
Name: FIBERGLASS (FIBROUS GLASS); (GLASS)
% Wt: 30-42
OSHA PEL: 5 MG/M3 RESP DUST
ACGIH TLV: 10 MG/M3 (<7MICRONS)
------------------------------
Name: FILLERS
% Wt: 12-20
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: PIGMENTS
% Wt: 12-20
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: RESIN(S)
% Wt: 10-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: SYNTHETIC RUBBER
% Wt: 10-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: INORGANIC MATERIALS (NOT SPECIFIED); (INORGANIC PARTICLES)
% Wt: 2-10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: PLASTIC; (PLASTIC BINDER)
% Wt: 1-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONT:DUST CREATED BY CUTTING, GRINDING OR SANDING OF
CURED PRODUCT MAY CAUSE MECH IRRIT. SKIN CONT:DUSTS MAY CAUSE IRRIT ON
PRLNG/RPTD CONTACT. INHAL:DUST CREATED BY CUTTING, GRINDING OR SANDING O F
CURED PRODUCT MAY CAUSE RESP IRRIT. INGEST:MAY CAUSE MINOR IRRIT TO MOUTH,
THROAT & STOMACH.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
CONTINUE FOR 10 MINUTES HOLDING EYELIDS OPEN. CALL MD. SKIN:WASH AFFECTED
AREA W/SOAP & WATER. INHAL:REMOVE PERSON TO FRESH AIR. CALL M D.
INGEST:DO NOT INDUCE VOMITING. IF PERSON IS CONSCIOUS GIVE ONE TO TWO GLASSES
OF WATER. IMMEDIATELY CALL MD.
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE AS DRY SCRAP. SINCE REGULATIONS VARY, CONSULT
APPLICABLE FEDERAL, STATE & LOCAL REGULATIONS OR AUTHORITIES BEFORE
DISPOSAL.
Handling And Storage Precautions: FOR INDUSTRIAL OR PROFESSIONAL USE ONLY.
AVOID EYE CONTACT W/INHALATION OF DUSTS CREATED BY CUTTING, GRINDING OR
SANDING OF CURED MATERIAL.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CARBON DIOXIDE, FOAM OR DRY CHEMICALS.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH/MSHA APPROVED DUST MASK TO PREVENT DUST
EXPOSURE DURING CUTTING OR GRINDING OF PRODUCT.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: HAZ DECOMP PROD:HYDROGEN CYANIDE.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Appearance and Odor: SOLID, WHITE; MINIMAL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE KNOWN.
Materials To Avoid: NONE KNOWN.
Hazardous Decomposition Products: THERMAL DECOMPOSITION MAY PRODUCE CARBON
MONOXIDE & CARBON DIOXIDE, HYDROGEN CHLORIDE, ALDEHYDES, HYDROCARBONS
&(SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: STAMARK HIGH PERFORMANCE 370
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 11/17/1994
Status Code: C
Label Date: 11/17/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:EYE CONT:DUST CREATED BY CUTTING, GRINDING OR
SANDING OF CURED PRODUCT MAY CAUSE MECH IRRIT. SKIN CONT:DUSTS MAY CAUSE
IRRIT ON PRLNG/RPTD CONTACT. INHAL:DUST CREATED BY CUTTING, GRINDING OR SAN
DING OF CURED PRODUCT MAY CAUSE RESP IRRIT. INGEST:MAY CAUSE MINOR IRRIT TO
MOUTH, THROAT & STOMACH. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.