3M GENERAL OFFICES -- SCOTCH-WELD DP-100 PART B CLEAR EPOXY ADHESIV
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXCSR
MSDS NAME: SCOTCH-WELD DP-100 PART B CLEAR EPOXY ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: KC2100000
Name: EPOXY RESIN;
% Wt: 100
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
RTECS #: 9999999VO
Name: VOC LESS H*2O & EXEMPT SOLVENT: 0 G/L
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: SUP DAT: IS NOT ADEQUATE, USE APPROPRIATE RESPIRATORY PROTECTION.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MOD IRRIT. CAN CAUSE REDNESS, SWELLING, PAIN,
TEARING, & HAZY VISION. VAPS FROM HEATED MATL MAY CAUSE IRRIT. SKIN: MAY
CAUSE ALLERGIC RXN/MILD IRRIT INCL REDNESS, SWELLING, BLISTERING &
ITCHING. INHAL: MAY CAUSE UPPER RESP IRRIT INCLSORENESS OF NOSE &
THROAT, COUGHING & SNEEZING. VAPS OF HEATED (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: MATL MAY CAUSE RESP SYS IRRIT.
DUST FROM CUTTING, GRINDING, SANDING/MACHINING MAY CAUSE IRRIT OF RESP SYS.
INGEST: MAY CAUSE IRRIT OF GI TISS, INCL PAIN, VOMIT, ABDOM TENDERNESS, NAUS,
BLOOD IN VOMITUS & IN FECES. UNDER NORM PROCESSING CNDTNS, E.G.
GRINDING/HEATING, PROD MAY RELEASE FUMES & VAPS (SUP DAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN. GET MD
ATTN IMMED. SKIN: IMMED WASH W/SOAP & LGE AMTS OF WATER. REMOVE CONTAM
CLTHG. IF SIGNS/SYMP OCCUR, CALL MD. WASH CONTAM CLTHG BEFORE R EUSE &
DISPOSE OF CONTAM SHOES. INHAL: REMOVE PERS TO FRESH AIR. IF SYMP CONTINUE,
CALL MD. INGEST: DO NOT INDUCE VOMIT. DRINK TWO GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF MSDS FOR INFO REGARDING
PHYSICAL & HLTH HAZ, RESP PROT, VENT & PERS PROT EQUIP. CALL (612)
733-1110/(612) 733-6100 FOR 24-HR SPILL ASSIST. COVER W/ABSORB MATL. COLLECT
SPILL ED MATL. PLACE IN U.S. DOT APPRVD CONTR& SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL INCINERATOR. DISPOSE
OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A SANITARY LANDFILL, I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP OUT OF THE REACH
OF CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions: DO NOT CURE UP A MASS OF COMBINED MATERIAL LARGER THAN 50
GRAMS TO PREVENT THE POSSIBILITY OF EXOTHERM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID INHAL OF VAPS CREATED DURING CURE CYCLE. AVOID
INHAL OF DUST CREATED BY CUTTING, SANDING/GRINDING. WEAR A NIOSH/MSHA
APPROVED HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHAUST FOR GRINDING, CUTTING/SANDING CURED
MATL. CURING OVENS MUST BE EXHAUSTED TO (SUP DAT)
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THORO W/SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: EFTS OF OVEREXP: OF VARIABLE COMPOSITION BASED
ON SPECIFIC PROCESS CNDTNS. THESE PROCESS RELEASES MAY PRODUCE IRRIT/ANY OF
HLTH EFTS LISTED ABOVE WHEN EMISSIONS ARE PRESENT AT ELEVATED CONCS. USE W/AP
PROP LOC EXHAUST VENT. VENT: OUTDOORS/TO SUITABLE EMISSION CTL DEVICE. USE IN
WELL-VENT AREA. IF EXHAUST VENT
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.17
Solubility in Water: NOT SOLUBLE
Appearance and Odor: MEDIUM SYRUP, LIGHT STRAW COLORED, EPOXY ODOR.
Percent Volatiles by Volume: 0 (WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG ACIDS, STRONG OXIDIZING AGENTS, HEAT.
Hazardous Decomposition Products: CO, CO*2, ALDEHYDES, KETONES, HYDROCARBONS,
TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-100 PART B CLEAR EPOXY ADHESIVE
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 03/31/1995
Status Code: C
Label Date: 03/31/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: MODERATE IRRITATION. CAN CAUSE REDNESS,
SWELLING, PAIN, AND TEARING. VAPORS FROM HEATED MATERIAL MAY CAUSE
IRRITATION. SKIN: MAY CAUSE ALLERGIC REACTION OR MILD IRRITATION INCLUDING
REDNE SS, SWELLING, BLISTERING AND ITCHING. MAY BE ABSORBED THROUGH SKIN.
INHAL: MAY CAUSE UPPER RESPIRATORY IRRITATION, SORENESS OF NOSE AND THROAT,
COUGHING AND SNEEZING. INGEST: GASTROINTESTINAL IRRITATI ON, CAUSING PAIN,
VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS AND FECES. CHRONIC:
NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|