DEXTER CORP -- EPK 907 HARDENER, AB0907
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXCRR
MSDS NAME: EPK 907 HARDENER, AB0907
Kit Part: Y
Responsible Party
Name: DEXTER CORP
Address: 1 DEXTER RD
City: SEABROOK NH 03374
Info Phone: 603-474-5541
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: KEN DECOSTA
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEXTER CORP THE HYSOL DIV
Address: 1 DEXTER DR
City: SEABROOK NH 03874
Phone: 603-474-5541/FAX: 603-474-5545
Name: DIVERSITY WATER TECHNOLOGIES INC
Address: LABORATORY PK 7145 PINE ST
Box: 200
City: CHAGRIN FALLS OH 44022
Phone: 216-247-5000
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:ING 2:INHAL:ACUTE ACCIDENTAL EXPOS WOULD BE
NON-SPECIFIC & SIMILAR TO INHAL OF ANY DUST. SUCH SYMPS MIGHT INCL COUGH,
WHEEZING, DFCLT BRTHG & UPPER RESP TRACT IRRIT. SKIN:NO ADVERSE EFTS ARE
KNO WN AS CONSEQUENCE OF APPLICATION TO UNBROKEN SKIN. EYES:AS W/ANY
PARTICULATE MATL, TALC CAN CAUSE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:TEMPORARY DISCOMFORT & IRRIT
IF ACCIDENTALLY INTRODUCED INTO EYE. INGEST:NO KNOWN HAZ. ING 3:EYE:BASED ON
SIMILAR PROD TESTING, PROD MAY BE MOD IRRIT. CONT W/PROD AT ELEVATED TEMPS
CAN RSLT I N THERMAL BURNS. SKIN:BASED ON SIMILAR PROD TESTING, PROD MAY BE
MOD IRRIT & MAY CAUSE SENSIT. CONT W/PROD AT (SUPDAT)
Medical Cond Aggravated By Exposure: INDIVIDUALS W/ACTIVE PULMONARY DISEASE
SHOULD NOT BE ASSIGNED TO A HEAVY TALC DUST ENVIRONMENT.
First Aid: INHAL:REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, GIVE OXYGEN & CALL
MD. SKIN:REMOVE CONTAM CLTHG/SHOES & WIPE OFF EXCESS FROM SKIN. FLUSH
W/WATER. FOLLOW BY WASHING W/SOAP & WATER. IF IRRIT OCCURS, GET M ED
ATTN. DO NOT REUSE CLTHG UNTIL DECONTAM & SHOULD BE DESTROYED TO PVNT
REUSE. IF CONT W/HOT PROD OCCURS, IMMED FLUSH W/COOL WATER FOR 15 MINS.
CAREFULLY REMOVE CLTHG; IF CLTHG IS STUCK TO
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEANUP SHOULD BE I/A/W FEDERAL, STATE & LOCAL
ENVIRONMENTAL CONTROL REGULATIONS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL SHOULD BE I/A/W FEDERAL, STATE & LOCAL
ENVIRONMENTAL CONTROL REGULATIONS.
Handling And Storage Precautions: KEEP COOL I/A/W LABEL INSTRUCTIONS.
Other Precautions: FOLLOW RECOMMENDED CURING SCHEDULE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 480F,249C
Extinguishing Media: WATER, FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: DENSE SMOKE & TOXIC GASSES MAY BE LIBERATED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE TO EXPOSURE
OF CONCERN (FP N). NOT REQUIRED W/GOOD INDUSTRIAL VENTILATION.
Ventilation: LOCAL EXHAUST RECOMMENDED, MECHANICAL ACCEPTABLE.
Protective Gloves: IMPERVIOUS PLASTIC OR RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N). AS NEEDED TO PROTECT SKIN & CLOTHING.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). CNDTNS (POLYM):FAILURE TO OBSERVE CAUTS MAY
RSLT IN EXCESSIVE HEAT BUILD-UP W/RELS OF TOX GASES. EFTS OF OVEREXP:ELEVATED
T EMPS CAN RSLT IN THERMAL BURNS. INHAL:BECAUSE OF ITS LOW VOLATILITY, THIS
PROD IS NOT LIKELY TO BE INHAL HAZ.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 500F,260C
Vapor Pres: NIL
Vapor Density: NIL
Spec Gravity: 1.57
Evaporation Rate & Reference: NIL
Solubility in Water: NIL
Appearance and Odor: BLUE, HIGH VISCOSITY LIQUID; MILD ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NOT ESTABLISHED.
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CO, NO*X, ALDEHYDES, ACIDS & UNDETERMINED
ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL "DO NOT HEAT MATL UNLESS CURING SURFS TO BE BONDED.
(SUPDAT)
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EPK 907 HARDENER, AB0907
Company: DIVERSITY WATER TECHNOLOGIES INC
Street: LABORATORY PK 7145 PINE ST
PO Box: 200
City: CHAGRIN FALLS OH
Zipcode: 44022
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/03/1995
Status Code: C
Label Date: 04/03/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE:ING 2:INHAL:ACUTE ACCIDENTAL EXPOSURE WOULD BE
NON-SPECIFIC & SIMILAR TO INHALATION OF ANY DUST. SUCH SYMPTOMS MIGHT
INCLUDE COUGHING, WHEEZING, DIFFICULT BREATHING & UPPER RESPIRATORY TRACT
IRR ITATION. SKIN:NO ADVERSE EFFECTS ARE KNOWN AS CONSEQUENCE OF APPLICATION
TO UNBROKEN SKIN. EYES:AS W/ANY PARTICULATE MATERIAL, TALC CAN CAUSE
TEMPORARY DISCOMFORT & IRRITATION. ING 3:EYE:MODERATELY IR RITATING, MAY
CAUSE THERMAL BURNS. SKIN:MODERATELY IRRITATING, MAY CAUSE SENSITIZATION
& THERMAL BURNS. CHRONIC:MILD PNEUMOCONIOSIS MAY DEVELOP IF OVEREXPOSED.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SCOTCHBOND MULTI-PURPOSE PLUS CATALYST 3.5
| 1565-94-2
868-77-9
94-36-0 |
|
7543 SCOTCHBOND MULTI-PURPOSE ADHESIVE
| 1565-94-2
868-77-9 |
|
CHEMIDIZE 740 PRODUCT CODE:24740
| |
|
EASY-FLO 45, SILVER-COPPER-CADMIUM-ZINC BRAZING ALLOYS
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
SCOTCHBOND DUAL CURE DENTAL ADEHESIVE RESIN,7533 R
| 1565-94-2
109-16-0
10025-87-3
94-36-0 |
|
SCOTCHBOND DUAL CURE DENTAL ADEHESIVE LIQ,7533 L & 7546
| 64-17-5
873-55-2 |
|
VITREBOND GLASS IONOMER LIQUID,7512 L
| 7732-18-5
868-77-9 |
|
SCOTCHBOND MULTI-PURPOSE PRIMER,7542
| 7732-18-5
868-77-9 |
|
304322;MERCURIC OXIDE CELL USED IN VARIOUS BATTERIES(SUPPL)
| 1310-58-3
21908-53-2
7439-97-6
7440-66-6
1313-13-9 |
|
SCOTCHCAST BRAND ELECTRICAL RESIN 280, PART A
| |
|
SCOTCHCAST BRAND ELECTRICAL RESIN 280, PART B
| 25377-73-5
90-72-2
68308-83-8 |
|
ENVIROSOLVE 655
| |
|
SYNTHETIC PENETRATING LUBRICANT,E-Z-1
| |
|
DEXA CLEAN 721 SUPER X
| 1310-58-3
111-76-2 |
|
EPK 907 RESIN, AA0907
| |
|
EPK 907 HARDENER, AB0907
| |
|
SCOTCH-WELD DP-100 PART A CLEAR EPOXY ADHESIVE
| |
|
SCOTCH-WELD DP-100 PART B CLEAR EPOXY ADHESIVE
| 25068-38-6 |
|
TASKI WIWAX, 92019
| 9016-45-9 |
|
TASKI WIWAX, 92025
| 9016-45-9 |
|
TASKI WIWAX, 92028-US
| 9016-45-9 |
|
4134 CODING AND MARKING INK, BRONZE
| |
|
4134 CODING AND MARKING INK, BLUE
| |
|
4134 CODING AND MARKING INK, WHITE
| |
|
4134 CODING AND MARKING INK, BLACK
| |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13850
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13870
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13880
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13900
| 6381-92-6
7732-18-5 |
|
AP 1602
| |
|
AFT 1402
| |
|
AFT 701
| |
|
GLOSS EPOXY CURING AGENT 995U
| 111-76-2
108-10-1
1330-20-7
111-40-0
25068-38-6 |
|
VITALIFE 400, 50007
| |
|
GREEN LITHIUM GREASE, 94312
| |
|
PUNCH II/DEEP PUNCH
| |
|
PUNCH II/M5G
| |
|
PUNCH II/M5B
| |
|
PUNCH/M-4
| |
|
PUNCH/M-3
| |
|
PUNCH/M-2
| |
|
PUNCH/M-1
| |
|
PERMATEX HIGH TEMP RTV SILICONE GASKET MAKER, 26BR
| 63148-62-9
112945-52-5
1309-37-1 |
|
PERMATEX HIGH TEMP RTV SILICONE GASKET MAKER, 26B
| 63148-62-9
112945-52-5
1309-37-1 |
|
FLAT BLACK TOPCOAT
| 74-98-6
106-97-8
64742-95-6
108-88-3
64742-89-8
67-64-1
57018-52-7
14807-96-6
1333-86-4 |
|
QUICK PIK 5
| 7681-38-1
7681-49-4 |
|
PR 10, POLYESTER LAMINATING RESIN
| |
|
PR 12, POLYESTER FINISHING RESIN
| |
|
PREP RITE COATINGS REMOVER
| |
|
18-25% OXYGEN IN NITROGEN
| 7782-44-7
7727-37-9 |
|
|