3M GENERAL OFFICES -- SCOTCH-WELD DP-100 PART A CLEAR EPOXY ADHESIV
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXCSQ
MSDS NAME: SCOTCH-WELD DP-100 PART A CLEAR EPOXY ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MILD IRRIT. CAN CAUSE REDNESS, SWELLING, PAIN, &
TEARING. VAPS FROM HEATED MATL MAY CAUSE IRRIT. DUST CREATED BY CUTTING,
GRINDING, SANDING/MACHINING MAY CAUSE IRRIT. SKIN: MAY CAUSE ALLERGIC RX
N/MILD IRRIT INCL REDNESS, SWELLING, BLISTERING & ITCHING. MAY BE
ABSORBED THRU SKIN. INHAL: MAY CAUSE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: UPPER RESP IRRIT INCL SORENESS
OF NOSE & THROAT, COUGHING & SNEEZING. VAPS OF HEATED MATL MAY CAUSE
RESP SYS IRRIT. DUST FROM CUTTING, GRINDING, SANDING/MACHINING MAY CAUSE
IRRIT OF RESP SYS . INGEST: MAY CAUSE IRRIT OF GI TISS, INCL PAIN, VOMIT,
ABDOM TENDERNESS, NAUS, BLOOD IN VOMITUS & IN FECES. (SUP DAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN. GET MD
ATTN IMMED. SKIN: IMMED WASH W/SOAP & LGE AMTS OF WATER. REMOVE CONTAM
CLTHG. IF SIGNS/SYMP OCCUR, CALL MD. WASH CONTAM CLTHG BEFORE R EUSE &
DISPOSE OF CONTAM SHOES. INHAL: REMOVE PERS TO FRESH AIR. IF SYMP CONTINUE,
CALL MD. INGEST: DO NOT INDUCE VOMIT. DRINK TWO GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF MSDS FOR INFO REGARDING
PHYSICAL & HLTH HAZ, RESP PROT, VENT & PERS PROT EQUIP. CALL (612)
733-1110/(612) 733-6100 FOR 24-HR SPILL ASSIST. COVER W/ABSORB MATL. COLLECT
SPILL ED MATL. PLACE IN U.S. DOT APPRVD CONTR& SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL INCINERATOR. DISPOSE
OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A SANITARY LANDFILL, I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP OUT OF THE REACH
OF CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions: DO NOT CURE UP A MASS OF COMBINED MATERIAL LARGER THAN 50
GRAMS TO PREVENT THE POSSIBILITY OF EXOTHERM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID INHAL OF VAPS CREATED DURING CURE CYCLE. AVOID
INHAL OF DUST CREATED BY CUTTING, SANDING/GRINDING. WEAR A NIOSH/MSHA
APPROVED HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHAUST FOR GRINDING, CUTTING/SANDING CURED
MATL. CURING OVENS MUST BE EXHAUSTED TO OUTDOORS
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THORO W/SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: USERS OF THE "L" VERSION OF TO CONSULT "LR"
VERSION OF ADDITIONAL INFO (FP N). EFTS OF OVEREXP: UNDER NORM PROCESSING
CNDTNS, E.G. GRINDING/HEATING, PROD MAY RELEASE FUMES & VAPS OF VARIABLE
COMP OSITION BASED ON SPECIFIC PROCESS CNDTNS. THESE PROCESS RELEASES MAY
PRODUCE IRRIT/ANY OF HLTH EFTS LISTED ABOVE
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.15
Solubility in Water: NOT SOLUBLE
Appearance and Odor: MEDIUM SYRUP, DARK AMBER, STRONG MARCAPTAN ODOR
Percent Volatiles by Volume: 0 (WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZING AGENTS, HEAT.
Hazardous Decomposition Products: CO, CO*2, OXIDES OF NITROGEN, OXIDES OF
SULFUR ALDEHYDES, KETONES, HYDROCARBONS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-100 PART A CLEAR EPOXY ADHESIVE
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 03/31/1995
Status Code: C
Label Date: 03/31/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: MILD IRRITATION. CAN CAUSE REDNESS,
SWELLING, PAIN, AND TEARING. VAPORS FROM HEATED MATERIAL MAY CAUSE
IRRITATION. DUST CREATED BY CUTTING, GRINDING, SANDING OR MACHINING MAY CAUSE
IRRITA TION. SKIN: MAY CAUSE ALLERGIC REACTIONOR MILD IRRITATION INCLUDING
REDNESS, SWELLING, BLISTERING AND ITCHING. MAY BE ABSORBED THROUGH SKIN.
INHAL: MAY CAUSE SORENESS OF THE NOSE AND THROAT, COUGHING AND SNEEZING,
RESPIRATORY SYSTEM IRRITATION. INGEST: GASTROINTESTINAL TISSUE IRRITATION,
INCLUDING PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS AND
FECES. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|