DETCO MARINE -- PR 12, POLYESTER FINISHING RESIN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXDLV
MSDS NAME: PR 12, POLYESTER FINISHING RESIN
Responsible Party
Name: DETCO MARINE
Box: 1246
City: NEWPORT BEACH CA 92663
Info Phone: 714-631-8480
Emergency Phone Number: 714-631-8480
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DETCO MARINE
Address: UNKNOWN
City: NEWPORT BEACH CA 92663
Phone: 714-631-8480
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: ACUTE:STYRENE AT 400 PPM OR IN STRONG CONCENTRATIONS IS
IRRITATING TO ALL PARTS OF RESPIRATORY TRACT AND EYES. MAY BE FATAL AT 10,000
PPM. SOMEWHAT ANESTHETIC. STYRENE VAPOR RARELY EXCEEDS 200 PPM, FR OM
POLYESTER RESIN. CHRONIC:ALLERGIC SENSITIVITY CAN RESULT FROM CONTINUOUS
EXPOSURE.
Explanation Of Carcinogenicity: STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL 7, PG
345, 1987:GROUP 2B. ANIMAL:NERVOUS SYSTEM.
Signs And Symptions Of Overexposure: INHAL:DIZZINESS, FAINT FEELING, COMA AT
EXTREME LEVELS. CONTACT WITH SKIN/EYES:LOCAL IRRITATION, PAIN OR ITCHING.
SKIN ABSORPTION:LOCAL IRRITATION, PAIN OR ITCHING. INGESTION:NAUSEA,
VOMITING, COMA.
Medical Cond Aggravated By Exposure: RESPIRATIORY ALLERGIES, CHRONIC
RESPIRATORY TRACT IRRITATION, SKIN SENSITIVITY. RECOMMENDATIONS TO PHYSICIAN.
First Aid: EYES:FLUSH PROMPTLY WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES AND SEEK MEDICAL ATTENTION. SKIN:WASH AFFECTED AREA WITH SOAP AND
WATER, REMOVE SATURATED CLOTHING. INHALATION:REMOVE TO WELL- VENTILATED AREA,
MAKE COMFORTABLY WARM BUT NOT HOT. USE OXYGEN OR ARTIFICIAL RESPIRATION AS
NEEDED. INGESTION:DO NOT INDUCE VOMITING. CALL A PHYSICIAN IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SATURATED CLOTHING PROMPTLY AND WASH AFFECTED
AREAS WITH SOAP AND WATER. REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA.
ABSORB WITH INERT MATERIALS SUCH AS VERMICULITE AND PLACE IN CLOSED CONT
AINER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE IN AN APPROVED INCINERATOR OR DISPOSE OF IN
A CHEMICAL DUMP. DISPOSE OF ALL WASTES IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Handling And Storage Precautions: AVOID IMPROPER ADDN OF PROMOTER &/OR
CATALYST. PROMOTER & CATALYST USED W/THIS PROD SHOULD ALWAYS BE MIXED
SEPARATELY W/PROD & NEVER MIXED TOGETHER.
Other Precautions: AVOID STOR >100F. AVOID PRLNGD SKIN CONT & INHAL OF
HEATED VAPS/SPRAY MIST. HOW TO DETECT SUBSTANCE:(WARNING PROPERTIES OF
SUBSTANCE AS GAS, VAP, DUST/MIST). NOXIOUS ODOR FROM VAPOR. AVOID CONTACT WIT
H SPRAY MIST.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 89.0F,31.7C
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: STYRENE POLYMERIZED READILY AT ELEVATED
TEMPERATURES OF FIRE CONDITIONS. IF THIS OCCUR IN A CLOSED CONTAINER, VIOLENT
RUPTURE IS POSSIBLE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: MUST BE WORN TO PREVENT INHALATION OF HEATED VAPORS,
SPRAY MISTS OR IF TLV IS EXCEEDED.
Ventilation: PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION TO COMPLY
WITH INGREDIENTS AND FIRE AND EXPLOSION DATA.
Protective Gloves: CHEMICAL RESISTANT PLASTIC OR RUBBER.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: SAFETY SHOWER AND EYE WASH STATIONS SHOULD BE
AVAILABLE.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: EYE PROT:AND FULL LENGTH FACE SHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F4
B.P. Text: 295F,146C
Vapor Density: 3.6
Spec Gravity: 1.05-1.22 @ 25C
Solubility in Water: NEGLIGIBLE
Appearance and Odor: PURPLE OPAQUE LIQUID WITH A PUNGENT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT AND DIRECT SUNLIGHT.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CO*2, CARBON MONOXIDE, LOW MOLECULAR WEIGHT
HYDROCARBONS AND ORGANIC ACIDS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: SUNLIGHT, OPEN FLAME AND CONTAMINATION.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PR 12, POLYESTER FINISHING RESIN
Company: DETCO MARINE
Street: UNKNOWN
City: NEWPORT BEACH CA
Zipcode: 92663
Health Emergency Phone: 714-631-8480
Label Required IND: Y
Date Of Label Review: 04/11/1995
Status Code: C
Label Date: 04/11/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. ACUTE: STYRENE AT 400 PPM OR IN STRONG
CONCENTRATIONS IS IRRITATING TO ALL PARTS OF RESPIRATORY TRACT AND EYES. MAY
BE FATAL AT 10,000 PPM. SOMEWHAT ANESTHETIC. STYRENE VAPOR RARELY EXCEEDS
200 PPM, FROM POLYESTER RESIN. INHALATION: DIZZINESS, FAINT FEELING, COMA AT
EXTREME LEVELS. SKIN/EYES: LOCAL IRRITATION, PAIN OR ITCHING. SKIN
ABSORPTION: LOCAL IRRITATION, PAIN OR ITCHING. INGESTIO N: NAUSEA, VOMITING,
COMA. CHRONIC: CANCER HAZARD: MONOSTYRENE IS LISTED AS A LUNG AND LIVER
CARCINOGEN TO LABORATORY ANIMALS (FP N). ALLERGIC SENSITIVITY CAN RESULT FROM
CONTINUOUS EXPOSURE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SCOTCHBOND MULTI-PURPOSE PLUS CATALYST 3.5
| 1565-94-2
868-77-9
94-36-0 |
|
7543 SCOTCHBOND MULTI-PURPOSE ADHESIVE
| 1565-94-2
868-77-9 |
|
CHEMIDIZE 740 PRODUCT CODE:24740
| |
|
EASY-FLO 45, SILVER-COPPER-CADMIUM-ZINC BRAZING ALLOYS
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
SCOTCHBOND DUAL CURE DENTAL ADEHESIVE RESIN,7533 R
| 1565-94-2
109-16-0
10025-87-3
94-36-0 |
|
SCOTCHBOND DUAL CURE DENTAL ADEHESIVE LIQ,7533 L & 7546
| 64-17-5
873-55-2 |
|
VITREBOND GLASS IONOMER LIQUID,7512 L
| 7732-18-5
868-77-9 |
|
SCOTCHBOND MULTI-PURPOSE PRIMER,7542
| 7732-18-5
868-77-9 |
|
304322;MERCURIC OXIDE CELL USED IN VARIOUS BATTERIES(SUPPL)
| 1310-58-3
21908-53-2
7439-97-6
7440-66-6
1313-13-9 |
|
SCOTCHCAST BRAND ELECTRICAL RESIN 280, PART A
| |
|
SCOTCHCAST BRAND ELECTRICAL RESIN 280, PART B
| 25377-73-5
90-72-2
68308-83-8 |
|
ENVIROSOLVE 655
| |
|
SYNTHETIC PENETRATING LUBRICANT,E-Z-1
| |
|
DEXA CLEAN 721 SUPER X
| 1310-58-3
111-76-2 |
|
EPK 907 RESIN, AA0907
| |
|
EPK 907 HARDENER, AB0907
| |
|
SCOTCH-WELD DP-100 PART A CLEAR EPOXY ADHESIVE
| |
|
SCOTCH-WELD DP-100 PART B CLEAR EPOXY ADHESIVE
| 25068-38-6 |
|
TASKI WIWAX, 92019
| 9016-45-9 |
|
TASKI WIWAX, 92025
| 9016-45-9 |
|
TASKI WIWAX, 92028-US
| 9016-45-9 |
|
4134 CODING AND MARKING INK, BRONZE
| |
|
4134 CODING AND MARKING INK, BLUE
| |
|
4134 CODING AND MARKING INK, WHITE
| |
|
4134 CODING AND MARKING INK, BLACK
| |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13850
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13870
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13880
| 6381-92-6
7732-18-5 |
|
EDTA (DISODIUM) TITRANT, 0.01M-0.1M, LC 13900
| 6381-92-6
7732-18-5 |
|
AP 1602
| |
|
AFT 1402
| |
|
AFT 701
| |
|
GLOSS EPOXY CURING AGENT 995U
| 111-76-2
108-10-1
1330-20-7
111-40-0
25068-38-6 |
|
VITALIFE 400, 50007
| |
|
GREEN LITHIUM GREASE, 94312
| |
|
PUNCH II/DEEP PUNCH
| |
|
PUNCH II/M5G
| |
|
PUNCH II/M5B
| |
|
PUNCH/M-4
| |
|
PUNCH/M-3
| |
|
PUNCH/M-2
| |
|
PUNCH/M-1
| |
|
PERMATEX HIGH TEMP RTV SILICONE GASKET MAKER, 26BR
| 63148-62-9
112945-52-5
1309-37-1 |
|
PERMATEX HIGH TEMP RTV SILICONE GASKET MAKER, 26B
| 63148-62-9
112945-52-5
1309-37-1 |
|
FLAT BLACK TOPCOAT
| 74-98-6
106-97-8
64742-95-6
108-88-3
64742-89-8
67-64-1
57018-52-7
14807-96-6
1333-86-4 |
|
QUICK PIK 5
| 7681-38-1
7681-49-4 |
|
PR 10, POLYESTER LAMINATING RESIN
| |
|
PR 12, POLYESTER FINISHING RESIN
| |
|
PREP RITE COATINGS REMOVER
| |
|
18-25% OXYGEN IN NITROGEN
| 7782-44-7
7727-37-9 |
|
|