CIBA-GEIGY CORP -- FASTWELD 10 DS HARDENER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXGGN
MSDS NAME: FASTWELD 10 DS HARDENER
Kit Part: Y
Responsible Party
Name: CIBA-GEIGY CORP
Address: 4917 DAWN AVE
City: EAST LANSING MI 48823
Info Phone: 517-351-5900
Emergency Phone Number: 800-888-8372
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CIBA SPECIALTY CHEMICALS CORPORATION
Address: 4917 DAWN AVE
City: EAST LANSING MI 48823-5691
Phone: 517-351-5900
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: SKIN/EYES: MAY CAUSE IRRITATION. SENSITIZATION:
POSSIBLE IN SUSCEPTIBLE INDIVIDUALS.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SKIN AND EYE IRRITATION AND ALLERGIC SKIN
REACTIONS.
Medical Cond Aggravated By Exposure: SKIN AND EYE CONDITIONS.
First Aid: EYES: IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MIN. CALL MD. SKIN:
WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE
REUSE. INGEST: IF CONSCIOUS, GIVE PLENTY OF WATER TO DRINK. DO NO T INDUCE
VOMITING. CALL MD. INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN &/ARTIFICIAL
RESPIRATION IF NEEDED. CALL MD. REFERRAL TO MD IS RECOMMENDED IF THERE IS ANY
QUESTION ABOUT SERIOUSNESS OF ANY INJURY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SPILLAGE BY ABSORBING IN ABSORBENT MATERIAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL FOR
METHOD THAT WILL COMPLY WITH LOCAL, STATE & FEDERAL HEALTH AND
ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: WARNING: CAUSES SKIN AND EYE IRRITATION. MAY
CAUSE ALLERGIC SKIN REACTION. AVOID CONTACT W/EYES, SKIN, & CLOTHING.
WASH THOROUGHLY AFTER HANDLING.
Other Precautions: AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. NUISANCE DUST
MAY BE GENERATED WHEN SANDING OR SAWING CURED MATERIAL.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 270F,132C
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE
TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation: GENERAL MECHANICAL AND LOCAL EXHAUST IN ACCORDANCE WITH ACGIH
RECOMMENDATIONS.
Protective Gloves: IMPERMEABLE GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: SPEC GRAV: 1.43-1.53 (H*2O=1).
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 0.008
Spec Gravity: (SUP DAT)
Solubility in Water: SLIGHT
Appearance and Odor: WHITE PASTE, WITH TYPICAL MERCAPTAN ODOR
Percent Volatiles by Volume: <1
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME.
Materials To Avoid: STRONG OXIDIZING AGENTS, ACIDS, METAL-ORGANIC COMPOUNDS.
Hazardous Decomposition Products: COMBUSTION MAY FORM TOXIC MATERIALS, SUCH AS
CARBON DIOXIDE, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: FASTWELD 10 DS HARDENER
Company: CIBA SPECIALTY CHEMICALS CORPORATION
Street: 4917 DAWN AVE
City: EAST LANSING MI
Zipcode: 48823-5691
Health Emergency Phone: 800-888-8372
Label Required IND: Y
Date Of Label Review: 04/25/1995
Status Code: C
Label Date: 04/25/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN/EYES: MAY CAUSE IRRITATION. SENSITIZATION:
POSSIBLE IN SUSCEPTIBLE INDIVIDUALS. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.