Search   
MSDS  : 155 8931,METAL ETCH RESIST THINNER
CAS  : 1330-20-7
NAME  : xylenes (o-,m-,p- isomers) (sara iii)
===================== Product Identification =====================

MSDS NAME:155 8931,METAL ETCH RESIST THINNER
NIIN:00N000569
MSDS Number: BCFTG
=== Responsible Party ===
Company:EASTMAN KODAK COMPANY
Address:343 STATE STREET
City:ROCHESTER
State:NY
ZIP:14650
Country:US
Info Phone Num:716-722-5151
Emergency Phone Num:716-722-5151
CAGE:19139
=== Contractor Identification ===
Company:EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
Address:343 STATE ST
Box:City:ROCHESTER
State:NY
ZIP:14650-1115
Country:US
Phone:716-722-5151/(800) 242-2424
CAGE:19139

============= Composition/Information on Ingredients =============

Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 97.5%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

===================== Hazards Identification =====================

Effects of Overexposure:INHAL:HI-VAPOR CONC,ANESTHETIC W/HEADCH,DIZ &
NAUSEA;EYE:LIQUID IRRITATES;SKIN:DEFAT & CRACKING

======================= First Aid Measures =======================

First Aid:INHAL:REMOVE FROM EXPOSURE & GET MEDICAL ATTENTION;EYES:FLUSH
IMMEDIATELY W/PLENTY OF WATER & GET MEDICAL ATTENTION;SKIN:FLUSH
WITH PLENTY OF WATER.

===================== Fire Fighting Measures =====================

Flash Point:84F/29C TCC
Lower Limits:1.1
Upper Limits:7.0
Extinguishing Media:CARBON DIOXIDE,DRY FOAM
Fire Fighting Procedures:NONE INDICATED BY MFR
Unusual Fire/Explosion Hazard:NONE INDICATED BY MFR.

================== Accidental Release Measures ==================

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL.STATE & LOCAL
EFFLUENT LAWS TAKE PRECEDENCE.

====================== Handling and Storage ======================

Handling and Storage Precautions:MFR INDICATES NONE.
Other Precautions:WASH THOROUGHLY AFTER HANDLING.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:AN APPROVED ORGANIC VAPOR,FOR EMERGENCY USE ONLY
Ventilation:LOCAL EXHAUST & GENERAL MECHANICAL REQUIRED
Protective Gloves:MFR RECOMMENDED
Eye Protection:MFR RECOMMENDEDS
Other Protective Equipment:AS DICTATED BY LOCAL PROCEDURES TO PREVENT
SKIN CONTACT
Supplemental Safety and Health
INFORMATION EFFECTIVE ON MSDS 3/4/77

================== Physical/Chemical Properties ==================

HCC:F4
Boiling Pt:B.P. Text:136-139F
Vapor Pres:<10
Vapor Density:3.66
Spec Gravity:0.8627
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER-WHITE LIQUID;PETROLEUM ODOR
Percent Volatiles by Volume:100

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
CORROSIVES & OXIDIZERS
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:BURNING MAY RESULT IN EVOLUTION OF CO
& CARBON DIOXIDE

==================== Disposal Considerations ====================

Waste Disposal Methods:BURN-TREAT AS ORGANIC SOLVENTS;STATE & LOCAL
EFFLUENT LAWS TAKE PRECEDENCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SILASTIC J RTV SILICONE RUBBER,BASE
SILASTIC J RTV SILICONE RUBBER,CATALYST
ANTIFOAM AF EMULSION
TYPE N TONER
INTERLUX FIBERGLASS SOLVENT 202 (NEW FORM.) 123-86-4
108-94-1
INTERFLUX FIBERGLASS SOLVENT 8030-30-6
123-86-4
78-59-1
RUST JELLY 7664-38-2
AZROCK,CLEAR BRUSH-ON;56-012 1330-20-7
EPIBOND 1526, PART A 1317-65-3
7631-86-9
EPIBOND 1526,PART B 141-43-5
111-40-0
112945-52-5
1317-65-3
E-312, PART B HARDENER (DEH24)
SILASTIC NPC-40 SILICONE RUBBER 7631-86-9
68083-18-1
68083-19-2
70131-67-8
69430-24-6
SILASTIC NPC-80 SILICONE RUBBER 68037-69-4
7631-86-9
14808-60-7
68083-18-1
70131-67-8
E-446,DISCCEMENT,BRICK RED 7664-41-7
7732-18-5
HE-2 OPTICAL CEMENT 97-88-1
94-36-0
CONTAX II; 91591 354-58-5
FASTCURE POWDER 94-36-0
FASTCURE LIQUID 80-62-6
E-1003; PLATING RACK COATING MICROSOL 7727-43-7
UNICHROME 313 STOPOFF CMPD 8002-74-2
ALCLO POWDER 7429-90-5
7778-74-7
AVAROX DBPH 786-37-4
VAROX DBPH-50, P7 1004 786-37-4
471-34-1
300 RED INSULATING ENAMEL 1330-20-7
289 GREASE
696 SISI SEALER
MIRA-JET 2 PROD ID NO:024 SERIES
M-COAT GL RESIN (PART A) 13463-67-7
M-COAT GL CURING AGENT, PART B 1308-38-9
OMP-2 ORGANOTIN POLYMER 108-94-1
CORLAR EPOXY ENAMEL, 823-Y 7439-92-1
108-88-3
7440-39-3
CHEMGLZE II A 971 YELLOW 7758-97-6
1330-20-7
FERRIC CHLORIDE 42 7705-08-0
7732-18-5
VINYLTEX GOLDEN YELLOW ANTIFOULING PAINT 56-35-9
1330-20-7
108-10-1
1330-78-5
7758-97-6
TURCOAT 3797 7664-38-2
3333-67-3
LP-32 LIQUID POLYSULFIDE POLYMER
186 5682,KODASTAR MACHINE ACTIVATOR 1310-58-3
7732-18-5
4853 ADDITIVE, MULTI-PURPOSE
LUBRIZOL 3123
431,RESIN BASE ADHESIVE 8030-30-6
67-56-1
N-HEXANE, HIGH PURITY 110-54-3
LOOSEN-ALL PENETRATING OIL
ANTI-FOULANT ADDITIVE 56-35-9
2246 ANTIOXIDANT
ENTHOX AL 990,(CL 1A, METHOD C) 7738-94-5
7697-37-2
EBONOL SS-52 1310-73-2
ALOXIDE (CONVERSION COATING FOR ENGRVD AL) 7783-00-8
7664-38-2
16872-11-0
67-56-1
ALOXIDE,170401 7783-00-8
7758-99-8
7664-38-2
16872-11-0
7786-81-4
7732-18-5
155 8931,METAL ETCH RESIST THINNER 1330-20-7
742,720,TT-E-489,COMP L, WHITE#17778 8030-30-6
78-83-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net