===================== Product Identification =====================
MSDS NAME:LP-32 LIQUID POLYSULFIDE POLYMER
NIIN:00N000554
MSDS Number: BCFSM
=== Responsible Party ===
Company:THIOKOL CORPORATION, CHEMICAL DIVISION
Emergency Phone Num:(609) 396-4001
CAGE:11646
=== Contractor Identification ===
Company:THIOKOL CORP, CHEM DIV
CAGE:25941
Company:THIOKOL CORPORATION
Box:241
City:BRIGHAM
State:UT
ZIP:84302
Country:US
Phone:801-863-3325
CAGE:11646
============= Composition/Information on Ingredients =============
Name:MERCAPTANTERMINATED POLYSULFIDE POLYMER
===================== Hazards Identification =====================
Effects of Overexposure:NONE OBSERVED BY MFR
======================= First Aid Measures =======================
Eyes: IMMED FLUSH W/WATER AT LEAST 15 MIN, CALL MD. SKIN:
WASH W/PLENTY SOAP & WATER IMMED.
===================== Fire Fighting Measures =====================
Flash Point:455F COC
Extinguishing Media:WATER, CO*2, DRY CHEM
Fire Fighting Procedures:USE SELF-CNTND BRTHNG APPARATUS
Unusual Fire/Explosion Hazard:NONE KNOWN TO MFR
================== Accidental Release Measures ==================
Spill Release Procedures:COVER SPILL W/ABSORBENT (ZIP-ZORB). REMOVE
ABSORBENT & STORE IN OUTSIDE CNTNR. MFR SUGGESTS WIPE FLOOR W/RAGS
& SM AMT OF 1,1,1-TRICHLOROETHANE TAKING PRECAUTIONS AGAINST INH
HAZ.
====================== Handling and Storage ======================
Handling and Storage Precautions:PREVENT PROLONGED REPEATED SKIN CNTCT.
MFR STATES LD50, RAT, IS GREATER THAN 5MG/KG.
============= Exposure Controls/Personal Protection =============
Ventilation:MECH, YES
Protective Gloves:YES
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
FORMULA: HS (C*2H*4OCH*20C*2H*4SS)*23C*2H*40CH*20C*2H*4SH. SPECIFIC
GRAVITY: 1.28 +0 1.30@ 25/25C.
================== Physical/Chemical Properties ==================
NRC/State Lic Num:NA
Appearance and Odor:LIGHT AMBER, VISCOUS LIQ, CHARACTERISTIC MERCAPTA
Percent Volatiles by Volume:0.2
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NITRIC ACID, SULFURIC ACID, HYDROCHLORIC ACID
Hazardous Decomposition Products:SO*, CO*2, H*2O, POSS FORMALDEHYDE &
H*2S
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR SUGGESTS LAND BURIAL WHERE STATUTES PERMIT
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SILASTIC J RTV SILICONE RUBBER,BASE
| |
|
SILASTIC J RTV SILICONE RUBBER,CATALYST
| |
|
ANTIFOAM AF EMULSION
| |
|
TYPE N TONER
| |
|
INTERLUX FIBERGLASS SOLVENT 202 (NEW FORM.)
| 123-86-4
108-94-1 |
|
INTERFLUX FIBERGLASS SOLVENT
| 8030-30-6
123-86-4
78-59-1 |
|
RUST JELLY
| 7664-38-2 |
|
AZROCK,CLEAR BRUSH-ON;56-012
| 1330-20-7 |
|
EPIBOND 1526, PART A
| 1317-65-3
7631-86-9 |
|
EPIBOND 1526,PART B
| 141-43-5
111-40-0
112945-52-5
1317-65-3 |
|
E-312, PART B HARDENER (DEH24)
| |
|
SILASTIC NPC-40 SILICONE RUBBER
| 7631-86-9
68083-18-1
68083-19-2
70131-67-8
69430-24-6 |
|
SILASTIC NPC-80 SILICONE RUBBER
| 68037-69-4
7631-86-9
14808-60-7
68083-18-1
70131-67-8 |
|
E-446,DISCCEMENT,BRICK RED
| 7664-41-7
7732-18-5 |
|
HE-2 OPTICAL CEMENT
| 97-88-1
94-36-0 |
|
CONTAX II; 91591
| 354-58-5 |
|
FASTCURE POWDER
| 94-36-0 |
|
FASTCURE LIQUID
| 80-62-6 |
|
E-1003; PLATING RACK COATING MICROSOL
| 7727-43-7 |
|
UNICHROME 313 STOPOFF CMPD
| 8002-74-2 |
|
ALCLO POWDER
| 7429-90-5
7778-74-7 |
|
AVAROX DBPH
| 786-37-4 |
|
VAROX DBPH-50, P7 1004
| 786-37-4
471-34-1 |
|
300 RED INSULATING ENAMEL
| 1330-20-7 |
|
289 GREASE
| |
|
696 SISI SEALER
| |
|
MIRA-JET 2 PROD ID NO:024 SERIES
| |
|
M-COAT GL RESIN (PART A)
| 13463-67-7 |
|
M-COAT GL CURING AGENT, PART B
| 1308-38-9 |
|
OMP-2 ORGANOTIN POLYMER
| 108-94-1 |
|
CORLAR EPOXY ENAMEL, 823-Y
| 7439-92-1
108-88-3
7440-39-3 |
|
CHEMGLZE II A 971 YELLOW
| 7758-97-6
1330-20-7 |
|
FERRIC CHLORIDE 42
| 7705-08-0
7732-18-5 |
|
VINYLTEX GOLDEN YELLOW ANTIFOULING PAINT
| 56-35-9
1330-20-7
108-10-1
1330-78-5
7758-97-6 |
|
TURCOAT 3797
| 7664-38-2
3333-67-3 |
|
LP-32 LIQUID POLYSULFIDE POLYMER
| |
|
186 5682,KODASTAR MACHINE ACTIVATOR
| 1310-58-3
7732-18-5 |
|
4853 ADDITIVE, MULTI-PURPOSE
| |
|
LUBRIZOL 3123
| |
|
431,RESIN BASE ADHESIVE
| 8030-30-6
67-56-1 |
|
N-HEXANE, HIGH PURITY
| 110-54-3 |
|
LOOSEN-ALL PENETRATING OIL
| |
|
ANTI-FOULANT ADDITIVE
| 56-35-9 |
|
2246 ANTIOXIDANT
| |
|
ENTHOX AL 990,(CL 1A, METHOD C)
| 7738-94-5
7697-37-2 |
|
EBONOL SS-52
| 1310-73-2 |
|
ALOXIDE (CONVERSION COATING FOR ENGRVD AL)
| 7783-00-8
7664-38-2
16872-11-0
67-56-1 |
|
ALOXIDE,170401
| 7783-00-8
7758-99-8
7664-38-2
16872-11-0
7786-81-4
7732-18-5 |
|
155 8931,METAL ETCH RESIST THINNER
| 1330-20-7 |
|
742,720,TT-E-489,COMP L, WHITE#17778
| 8030-30-6
78-83-1 |
|
|