===================== Product Identification =====================
MSDS NAME:MOLY HI-TEMP
NIIN:00N003978
MSDS Number: BCLHR
=== Responsible Party ===
Company:HILL MANUFACTURING CO, INCORPORATED
Emergency Phone Num:404-522-8364
CAGE:66086
=== Contractor Identification ===
Company:HILL MANUFACTURING CO INC
Address:1500 JONESBORO DR
Box:City:ATLANTA
State:GA
ZIP:30315
Country:US
Phone:404-522-8364
CAGE:66086
Company:HILL MFG CO,INC
Address:1500 JONESBORO ROAD
Box:City:ATLANTA
State:GA
ZIP:30315
Country:US
Phone:404-522-8364
CAGE:9U931
============= Composition/Information on Ingredients =============
Name:PETROLEUM HYDROCARBON
Name:LITHIUM PETROLEUM GREASE
Name:MOLYBDENUM DISULFIDE
CAS:1317-33-5
RTECS #:QA4697000
OSHA PEL:10 MG/M3 TDUST (MO)
ACGIH TLV:10 MG/M3 (MO); 8990
===================== Hazards Identification =====================
Effects of Overexposure:EXCESSIVE INHALATION MAY CAUSE HEADACHE,
DIZZINESS, OR NAUSEA.
======================= First Aid Measures =======================
First Aid:EYE CONTACT:FLUSH W/ WATER. SKIN CONTACT:WASH W/ MILD SOAP &
APPLY MILD SKIN CREAM. INHALATION:MOVE TO FRESH AIR, CALL PYSICIAN,
USE ARTIFICIAL RESPIRATION IF NEEDED.
===================== Fire Fighting Measures =====================
Flash Point:265F TOC
Extinguishing Media:WATER SRAY, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:NONE (MFR)
Unusual Fire/Explosion Hazard:NONE (MFR)
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH W/ WATER INTO RETAINING AREA OR
CONTAINER. AVOID EXPOSURE TO HEAT, SPARKS & OPEN FLAME.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM SPARKS, HEAT & OPEN
FLAME. AVOID PROLONGED CONTACT W/ SKIN. ADEQUATE VENTILATION IS
REQUIRED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT IF CONDITIONS
REQUIRE.
Ventilation:LOCAL EXHAUST
Protective Gloves:YES - RUBBER
Eye Protection:YES-SAFETY GLASSES.
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Supplemental Safety and Health
VAPOR PRESSURE:5.4 PSIA AT 70F.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:188F
Vapor Density:3.3
Spec Gravity:1.0
Evaporation Rate & Reference:3.3(BUTYL ACET=1)
Solubility in Water:NONE
Appearance and Odor:BLACK GREASE W/ PETROLEUM ODOR
Percent Volatiles by Volume:90
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT, SPARKS, & OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
CARBONMONOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS. DISPOSE OF IAW
FEDERAL, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|